| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: avoid infinite kdamond_merge_regions() internal loop
Patch series "mm/damon: unurgent fixes for infinite loop, NULL de-ref and
races", v1.1.
Sashiko found a few issues in DAMON that could cause infinite loop, NULL
dereference and monitoring results degradation. The first two sounds
scary but the infinite loop happens only under unreasonable user setup.
The NULL dereference is only in a unit test. Monitoring results
degradation is trivial since it is only best-effort, and those happens
from only unlikely races. Still those are bugs that better to fix if
possible. Fix those.
This patch (of 6):
Due to online parameter update like events, the number of DAMON regions
could be higher than the user-set upper limit. kdamond_merge_regions()
repeats merge regions until the number meets the limit, while doubling the
merge threshold up to the theoretical maximum threshold. It is tried only
up to the theoretical maximum threshold because even the aggressive
merging can fail from reducing the number of regions under the
user-defined upper limit. For example, there could be many user-defined
non-contiguous regions that cannot be merged.
The threshold based loop break condition is evaluated by comparing the
threshold for the next merging try against the theoretical maximum
threshold. If max_thres is larger than UINT_MAX / 2, doubling the
threshold could make it overflow, and bypass the loop break condition. In
the case, if the number of regions cannot be reduced under the upper limit
like explained above, the loop will run infinitely.
Prevent the case by doing the break condition check before doubling the
threshold. Also, prevent the threshold exceeding the maximum threshold,
as it could overflow and apply the wrong merge threshold.
This issue is unlikely to occur in real world, since having the max_thres
higher than UINT_MAX / 2 require unrealistically large aggregation
intervals compared to the sampling interval. Also, it requires an
unrealistically large number of uncontiguous regions setup. Nonetheless,
the consequence is bad and the fix is simple.
The issue was discovered [1] by Sashiko. |
| Uncontrolled Recursion vulnerability in Apache Thrift go bindings.
Both Go transports satisfy a read out of a buffered frame and, when that frame yields no payload bytes, read the next frame and call `Read` again instead of looping. A peer produces such a frame for 4 bytes in `TFramedTransport` (a declared size of zero) or 18 bytes in `THeaderTransport` (a header block that fills the frame), so nothing bounds the depth. The Go stack limit is reached as a `fatal error`, which `recover()` cannot catch, so the whole process dies.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Uncontrolled recursion in the Ion reader in Amazon Ion Python before 0.15.0 might allow a remote unauthenticated actor to crash the application using the library, resulting in a denial of service, via a crafted, deeply nested Ion value.
To remediate this issue, users should upgrade to version 0.15.0 or later. |
| Uncontrolled Recursion vulnerability in Apache Thrift c_glib bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Uncontrolled Recursion vulnerability in Apache Thrift Dart and Java ME bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| A vulnerability was detected in GraphicsMagick up to 1.3.47. Affected by this vulnerability is the function ExtractPostscript of the file coders/wpg.c of the component WPG File Handler. Performing a manipulation results in uncontrolled recursion. The attack may be initiated remotely. The patch is named 627b5b1b2fc2. It is suggested to install a patch to address this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| The Apache Traffic Server ESI plugin can recurse without bound and fetch attacker-controlled URLs.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue. |
| The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.20, 2.1.6, 3.0.8, and 5.0.11, deeply nested brace groups cause expand_() to recurse once per nesting level at comma-member and single-set expansion sites, exhausting the native stack before output limits can apply and potentially terminating the Node.js process. expand_ performs uncontrolled recursion for nested brace alternatives and single-part sets. deeply nested brace groups supplied as an untrusted pattern. expand_ is affected. expand is affected. Comma members is affected. Single set is affected. native stack exhaustion during nested sub-expansion. process-terminating denial of service. This issue is fixed in versions 1.1.20, 2.1.6, 3.0.8, and 5.0.11. |
| Use of released resource in Core in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Authlib (v1.7.2 and below) contains a signature verification bypass vulnerability. The JsonWebSignature.deserialize_json() method accepts a JSON Serialization JWS object and returns the payload as successfully verified without checking for a signature and without requiring a cryptographic key. |
| An endpoint used during initial appliance setup did not require authentication and did not correctly enforce its intended state precondition, so during the initial activation window an unauthenticated network attacker could repeatedly re-trigger the privileged activation process. This could disrupt setup and leave the appliance in an incompletely configured state. The issue is only reachable while an appliance is being activated for the first time and not yet fully configured. |
| Uncontrolled recursion in the Gosub browser engine (gosub-engine) through 0.1.0 and main before commit 46868b3 allows a remote attacker to cause a Denial of Service (stack exhaustion and application crash) via an SVG document containing an excessive number of deeply nested elements. Because the engine does not limit the nesting depth of processed SVG nodes, rendering such a document overflows the thread stack and terminates the application. The malicious SVG can be embedded through the SRC attribute of an IMG element, and thus exploitation only requires the victim to visit an attacker-controlled web page. |
| Werkzeug is a comprehensive WSGI web application library. Prior to 3.1.9, the safe_join function used by send_from_directory can allow a NUL: special-device path because safe_join checks the Windows device name without first removing an empty NTFS ADS marker. The trigger is that an application runs on Windows with NTFS and serves a user-specified path ending in a special device name such as NUL:. The attack mechanism is that a requested path ends in a Windows special device name with an empty ADS marker. The impact is that the special device opens successfully and the file read hangs indefinitely. This issue is fixed in version 3.1.9. |
| Integer Overflow, Improper Validation of Array Index, Uncontrolled Recursion and Memory Allocation with Excessive Size Value in the Go implementation of Apache PLC4X (PLC4Go) allow a malicious device, or an attacker able to inject network traffic, to crash or exhaust the memory of the client application,
causing a denial of service.
The individual defects are:
- Generated parsers pre-allocate arrays with the element count claimed on the wire (0.13.0 through 0.13.1).
- Transport read helpers allocate buffers of the size claimed on the wire without an upper bound.
- ADS and KNXnet/IP response handling indexes into received data without checking its length, causing a panic.
- ADS and EIP frame-length handling accepts, or arithmetically wraps to, a length of zero, breaking message framing.
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Java implementation is covered by CVE-2026-102509 https://cveprocess.apache.org/cve5/CVE-2026-102509 .
Additionally, length and position arithmetic in generated serializers was performed in 16-bit integers. If an application forwards attacker-influenced payloads larger than 8 KB, the length field wraps, and the remainder of the payload may be interpreted by the receiving device (for example, an ADS PLC) as
additional, independent protocol messages.
This issue affects Apache PLC4X: from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits, and Uncontrolled Recursion in the Java implementation of Apache PLC4X (PLC4J) allow a malicious or impersonated device to exhaust the memory or stack of the client application, causing a denial of service.
In the OPC UA driver these defects are reachable before authentication: the offending data is parsed while the secure channel and session are being established, before the server's identity has been bound to it. Configuring a trusted server therefore does not prevent exploitation by an attacker who can
impersonate it.
The individual defects are:
- Length-prefixed byte strings are allocated at the size claimed on the wire before the length is checked against the data actually received (0.10.0 through 0.13.1).
- Array fields in generated protocol parsers pre-allocate a list with the element count claimed on the wire, allowing a single count field to trigger a multi-gigabyte allocation. This parser is shared by all PLC4J drivers; the OPC UA driver is the verified pre-authentication path (0.10.0 through 0.13.1).
- The OPC UA driver accumulates message chunks without enforcing the negotiated maximum chunk count and message size (0.12.0 through 0.13.1).
- The OPC UA driver pre-allocates collections using element counts received from the server (0.10.0 through 0.13.1).
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Go implementation is covered by CVE-2026-102510 https://cveprocess.apache.org/cve5/CVE-2026-102510 .
This issue affects Apache PLC4X: from 0.10.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1, A crafted fits stream containing consecutive 2880-byte header blocks without the mandatory end keyword makes fitsinput::read_fits_header() call itself without a depth bound. repeated recursive parsing exhausts the application stack, resulting in denial of service. The affected implementation is identified by src/fits.imageio/fitsinput.cpp, FitsInput::read_fits_header(), END keyword, and 2880-byte FITS header blocks, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1. |
| Uncontrolled recursion in Microsoft Exchange Server allows an unauthorized attacker to deny service over a network. |
| The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.19, 2.1.5, 3.0.7, and 5.0.10, crafted brace patterns can exhaust the native stack in parseCommaParts because parseCommaParts recursively processes the remainder once per brace group and uses push.apply to pass every element of a very large comma-part array as a function argument. Patterns containing many comma-separated brace groups trigger the recursive path, while the large array triggers the argument-array path without deep recursion. These paths cause recursive and argument-array native stack exhaustion before max or maxLength can limit output, potentially terminating the Node.js process in a process-terminating denial of service. This issue is fixed in versions 1.1.19, 2.1.5, 3.0.7, and 5.0.10. |
| A malicious actor with access to the network could exploit an Uncontrolled Recursion vulnerability found in certain UniFi gateway devices to execute a Denial of Service (DoS) attack on the device. |
| Nest is a framework for building scalable Node.js server-side applications. Prior to 11.2.4 and 12.0.2, a single message with a deeply nested object in its pattern can terminate a NestJS microservice using the TCP or RabbitMQ transport. ServerTCP#handleMessage and ServerRMQ#handleMessage pass a client-controlled non-string pattern to JSON.stringify to derive the handler lookup key; sufficiently deep nesting throws RangeError: Maximum call stack size exceeded, and the unhandled promise rejection terminates Node.js under its default behavior. An attacker who can reach the TCP port or publish to the consumed RabbitMQ queue or exchange can crash the service on demand; other transports are not affected because their patterns arrive as strings. This issue is fixed in versions 11.2.4 and 12.0.2. |
