| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove
remove_pud_mapping() and remove_p4d_mapping() obtain a child table base
with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for
addr.
RISC-V folds page-table levels at runtime. When a level is folded, its
offset helper returns the parent entry itself, but the index can still be
nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39
folds both P4D and PUD, so memory hot-remove can descend into unrelated
memory and pass an invalid page to __free_pages(). This can trigger:
kernel BUG at include/linux/mm.h:1810!
VM_BUG_ON_PAGE(page_ref_count(page) == 0)
arch_remove_memory+0x1e/0x5c
try_remove_memory+0x15e/0x200
remove_memory+0x24/0x3c
Only add the index when the corresponding page-table level is enabled,
matching p4d_offset() and pud_offset(). |
| In the Linux kernel, the following vulnerability has been resolved:
packet: use consistent hard_header_len in non-ring send paths
packet_snd() reads dev->hard_header_len multiple times while allocating
and constructing an skb. Device reconfiguration can change this value
concurrently, for example through bonding device type changes.
For SOCK_RAW, packet_snd() can save a larger value in reserve and later
allocate headroom using a smaller value. Moving skb->data back by reserve
then places it before skb->head, and the following copy from userspace can
attempt an out-of-bounds write.
packet_sendmsg_spkt() has the same issue because it calculates its
reservation and header offset from separate reads before dropping the RCU
read lock to allocate the skb.
Add LL_RESERVED_SPACE_EX() for callers that already saved a header length.
Read hard_header_len once in packet_snd() and use it for allocation and
construction. In packet_sendmsg_spkt(), preserve the allocation-time value
through the device lookup retry.
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: fix supplied_from allocations
If dts property power-supplies has multiple values, then accessing to
psy->supplied_from[i-1] in __power_supply_populate_supplied_from will
overrun supplied_from array. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/qat: fix f_pos race in qat_vf_resume_write()
qat_vf_resume_write() checks filp->f_pos before taking migf->lock, but
copies into the migration-state buffer after taking the lock and
re-reading the shared file position.
Two concurrent writers could therefore pass the bounds check with the
old offset, then have the second writer copy after the first advanced
f_pos, writing past the end of the migration-state buffer.
Take migf->lock before doing the boundary checks. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vdpa: validate virtqueue index in mmap and fault paths
vhost_vdpa_mmap() and vhost_vdpa_fault() use vma->vm_pgoff as a
virtqueue index for get_vq_notification(), but they do not validate
that the index is smaller than v->nvqs.
The ioctl path already performs both a bounds check and
array_index_nospec(), but the mmap/fault path only checks that the
index fits in u16. This allows an out-of-range queue index to reach
driver-specific get_vq_notification() callbacks.
Fix this by extracting a unified vhost_vdpa_get_vq_notification()
helper that validates the queue index against v->nvqs and applies
array_index_nospec() before calling the driver callback. Both the
mmap and fault paths use this helper, and the bounds checking is
consolidated into a single location.
From source inspection, the most defensible impact is out-of-bounds
access in the callback path, potentially leading to invalid PFN
remaps and crash/DoS. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its
too-short range validation only checks sb->s_blocksize.
On filesystems with a cluster size larger than the block size, a FITRIM
range that is at least one block but shorter than one cluster is accepted
and shifted down to len == 0. The later start + len - 1 and len -= ...
arithmetic then underflows and can drive trimming past the requested
range.
Reject ranges shorter than s_clustersize instead. That preserves the
existing -EINVAL behavior for requests that cannot discard even one
allocation unit and keeps zero-cluster trims out of the group walk. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: fix flex array size in struct nvme_ns_head
struct nvme_ns_head contains a flexible array member, current_path[],
which is indexed using the NUMA node ID:
head->current_path[numa_node_id()]
The structure is currently allocated as:
size = sizeof(struct nvme_ns_head) +
(num_possible_nodes() * sizeof(struct nvme_ns *));
head = kzalloc(size, GFP_KERNEL);
This allocation assumes that NUMA node IDs are sequential and densely
packed from 0 .. num_possible_nodes() - 1. While this assumption holds
on many systems, it is not always true on some architectures such as
powerpc.
On some powerpc systems, NUMA node IDs can be sparse. For example:
NUMA:
NUMA node(s): 6
NUMA node0 CPU(s): 80-159
NUMA node8 CPU(s): 0-79
NUMA node252 CPU(s):
NUMA node253 CPU(s):
NUMA node254 CPU(s):
NUMA node255 CPU(s):
That is, the possible/online NUMA node IDs are: 0, 8, 252, 253, 254, 255
In this case: num_possible_nodes() = 6
So memory is allocated for only 6 entries in current_path[]. However,
the array is later indexed using the actual NUMA node ID. As a result,
accesses such as:
head->current_path[8] or
head->current_path[252]
goes out of bounds, leading to the following KASAN splat:
==================================================================
BUG: KASAN: slab-out-of-bounds in nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core]
Write of size 8 at addr c00020003bda35b8 by task kworker/u641:2/1997
CPU: 1 UID: 0 PID: 1997 Comm: kworker/u641:2 Not tainted 7.1.0-rc5-dirty #14 PREEMPT(lazy)
Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV
Workqueue: async async_run_entry_fn
Call Trace:
[c000200037fa7510] [c0000000021c23d4] dump_stack_lvl+0x88/0xdc (unreliable)
[c000200037fa7540] [c0000000009fda90] print_report+0x22c/0x67c
[c000200037fa7630] [c0000000009fd508] kasan_report+0x108/0x220
[c000200037fa7740] [c0000000009fff48] __asan_store8+0xe8/0x120
[c000200037fa7760] [c008000018e76474] nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core]
[c000200037fa7800] [c008000018e6556c] nvme_update_ns_info+0x4a4/0x5e0 [nvme_core]
[c000200037fa7a50] [c008000018e66270] nvme_alloc_ns+0x6d8/0x1a70 [nvme_core]
[c000200037fa7c20] [c008000018e679fc] nvme_scan_ns+0x3f4/0x630 [nvme_core]
[c000200037fa7d10] [c00000000031f22c] async_run_entry_fn+0x9c/0x3a0
[c000200037fa7db0] [c0000000002fa544] process_one_work+0x414/0xa10
[c000200037fa7ec0] [c0000000002fbf00] worker_thread+0x320/0x640
[c000200037fa7f80] [c00000000030d0f8] kthread+0x278/0x290
[c000200037fa7fe0] [c00000000000ded8] start_kernel_thread+0x14/0x18
Allocated by task 1997 on cpu 1 at 35.928317s:
The buggy address belongs to the object at c00020003bda3000
which belongs to the cache kmalloc-rnd-15-2k of size 2048
The buggy address is located 16 bytes to the right of
allocated 1448-byte region [c00020003bda3000, c00020003bda35a8)
The buggy address belongs to the physical page:
Memory state around the buggy address:
c00020003bda3480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00020003bda3500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c00020003bda3580: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
^
c00020003bda3600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
c00020003bda3680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fix this by allocating the flexible array using nr_node_ids instead
of num_possible_nodes(). Since nr_node_ids represents the maximum
possible NUMA node IDs, indexing current_path[] using numa_node_id()
becomes safe even on systems with sparse node IDs. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix out-of-bounds access in nvme_setup_descriptor_pools
nvme_setup_descriptor_pools() indexes dev->descriptor_pools[] using the
numa_node forwarded from hctx->numa_node by its single caller,
nvme_init_hctx_common(). On a non-NUMA kernel hctx->numa_node is
NUMA_NO_NODE (-1). Because the parameter was declared 'unsigned', the
value becomes UINT_MAX and the index walks off the array (sized to
nr_node_ids), faulting during nvme_alloc_ns() and leaving the namespace
without a /dev node.
Reproduces on any NVMe controller probed by a CONFIG_NUMA=n kernel:
BUG: unable to handle page fault for address: ffff889101603d38
RIP: 0010:nvme_init_hctx_common+0x5a/0x190 [nvme]
Call Trace:
nvme_init_hctx+0x10/0x20 [nvme]
nvme_alloc_ns+0x9e/0xa10 [nvme_core]
nvme_scan_ns+0x301/0x3b0 [nvme_core]
nvme_scan_ns_async+0x23/0x30 [nvme_core]
Switch the parameter to int and fall back to node 0 when it is
NUMA_NO_NODE; node 0 is always present. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs
The irdma_copy_user_pgaddrs function loops through all of the umem DMA
blocks to populate the PBLEs and will stop when either the last DMA
block is reached or palloc->total_cnt is reached. The issue is that
the logic for checking palloc->total_cnt would only work for non-zero
values.
When irdma_setup_pbles is called with lvl==0, it
calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means
the only way to break out of the loop is to reach the last umem DMA
block, which means it could end up going beyond the fixed size of 4
iwmr->pgaddrmem array that is used in the lvl==0 case.
In the case of QP/CQ/SRQ rings, the value of lvl is determined by a
separate input (for example, req.cq_pages in the case of a CQ). So,
we must perform explicit checking to ensure we don't overflow the
pgaddrmem array if the user provides a umem that consists of more
blocks than their provided req.cq_pages. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.124.0 until 0.142.0, openapi3filter.sliceMapToSlice in openapi3filter/req_resp_decoder.go converts attacker-controlled sparse indexes from a deepObject query parameter into a dense slice by allocating entries from zero through the largest supplied index, after which buildResObj creates another slice of the same length. This allocation occurs before schema validation, so maxItems does not prevent it. An unauthenticated client can send a small query such as param[items][50000000]=x to an endpoint whose deepObject schema contains an array, forcing multi-gigabyte heap allocation and causing an OOM kill or restart loop. Other request-body encodings and styled parameters that do not produce bracketed integer indexes are not affected. This issue is fixed in version 0.142.0. |
| Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has a heap out-of-bounds write in bufferevent_sock.c when bufferevent_socket_set_conn_address_ copies a kernel-supplied AF_UNIX peer address into bufferevent_private.conn_address. Release builds compiled with NDEBUG disable the EVUTIL_ASSERT length guard, and the evhttp accept path can pass a 110-byte sockaddr from accept() into the 28-byte field. An unauthenticated local peer able to connect to an AF_UNIX listener can overwrite the adjacent dns_request pointer and heap data, causing memory corruption with confidentiality, integrity, and availability impact. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. |
| SumatraPDF is a multi-format reader for Windows. In 3.6.1 and earlier, a crafted CHM file can supply malformed LZX Huffman code lengths to make_decode_table in ext/CHMLib/lzx.c. In the long-code branch, the function writes new internal nodes through next_symbol before validating that the canonical Huffman table has overflowed. The PRETREE case can write beyond the 104-entry PRETREE_table into adjacent heap state in struct LZXstate when reached through chm_open, chm_retrieve_object, LZXdecompress, and BUILD_TABLE. This produces heap memory corruption in the parser process, while arbitrary code execution has not been demonstrated. No fixed version is available as of this review. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Prior to 2.3.2, the DELETE /ssh/tunnel/disconnect/:tunnelName teardown path in src/backend/ssh/tunnel.ts interpolates endpointPort, sourcePort, endpointUsername, and endpointIP into single-quoted pkill -f patterns. An authenticated user who can edit a tunnel host field can include a single quote to terminate the pattern and append a shell command, which executes when the tunnel is disconnected. Successful exploitation runs arbitrary commands on the source SSH host with the privileges of the connected SSH account. This issue is fixed in version 2.3.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: hold event_mutex while checkpointing CRIU events
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
(cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp frame size in implicit-feedback mode
snd_usb_handle_sync_urb() scales received sync packet sizes by the sender's
stride and stores the result directly in out_packet->packet_size[i]. If a
connected USB device sends an oversized sync packet, this frame count can
exceed ep->maxframesize.
The un-clamped frame count then propagates to the playback endpoint queue,
potentially driving packet transfers beyond the endpoint's hardware frame
limits.
Cap the calculated frame count against ep->maxframesize in
snd_usb_handle_sync_urb() to prevent oversized packets from entering the
playback queue. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set
When a USB audio endpoint requests full packet transfers via the fill_max
descriptor flag, data_ep_set_params() promotes ep->curpacksize to
ep->maxpacksize. However, maxsize is left at the original sample-rate
derived value.
Since u->buffer_size is allocated as maxsize * packets, the resulting
DMA buffer is far too small for the requested transfer length. When the
USB host controller streams up to curpacksize bytes per packet, it writes
past the end of the buffer via DMA, corrupting kernel heap memory.
Update maxsize to curpacksize when fill_max is set so that the allocated
DMA buffer size matches the actual transfer request size.
[ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] |
| An issue in Tneda W20E v.16.01.0.6(2782) allows a remote attacker to execute arbitrary code via the url_need_login function |
| SiYuan before 3.7.4 fails to properly escape workspace directory paths when constructing command-line arguments for the elevated elevator.exe helper process. Attackers can create a malicious workspace directory with command metacharacters in its path and trigger the Microsoft Defender exclusion flow to execute arbitrary commands with administrator privileges after UAC approval. |
