| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix races in Tx timestamp handling
wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary
worker and the timestamp cleanup paths. The
WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from
submitting timestamp requests, but does not serialize the worker
against cleanup.
As a result, wx_ptp_clear_tx_timestamp() can free an skb after
wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may
then pass the freed skb to skb_tstamp_tx() and release the same
reference again.
The cleanup path may also clear the in-progress bit while the worker
is still processing the old skb. This allows the Tx path to publish a
new skb which the worker can subsequently overwrite with NULL,
leaking its reference.
Add a dedicated spinlock to protect publication and consumption of
the Tx timestamp skb. Detach the skb and clear the in-progress bit
while holding the lock, then deliver the timestamp and release the skb
after dropping it. Use the same locked cleanup in the quiesce path,
but keep the detach there free of register accesses: quiesce runs
during PCIe error recovery, where MMIO is not reliable, and it
deliberately did not touch the device before. The lock is taken with
interrupts disabled, because netpoll can call ndo_start_xmit() with
hard interrupts already off.
When handling a Tx DMA mapping failure, keep the transmit path
reference until after comparing the skb under the lock. This prevents
skb address reuse from making the error path mistake a newer timestamp
request for the failed one. |
| A vulnerability is in Web Server default connection ports under the process name GeoWebServer.exe . |
| SENAYAN Library Management System (SLiMS) Bulian (slims9_bulian) 9.8.0 is vulnerable to SQL Injection in admin/modules/reporting/customs/dl_detail.php via the parameter fileID. |
| A segmentation violation in the dump_isom_saps function (/mp4box/filedump.c) of GPAC MP4Box v2.5-DEV-rev1672-gc9a31d0e1-masterallows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| Dell Application Store, versions prior to 26.05.0.7, contain a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to arbitrary code execution. |
| Dell Application Store, versions prior to 26.05.0.7, contain an Incorrect Permission Assignment for Critical Resource vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Disclosure of sensitive information |
| Summary
Before version 0.9.0, Pingora accepted HTTP/2 requests whose Host header differed from the :authority pseudo-header. Request filters, cache keys, and logs that read the request URI (session.req_header().uri) saw the :authority value, but the upstream received the client-supplied Host value. Pingora also accepted :authority values containing userinfo (for example, user@example.com). This violates RFC 9113 Section 8.3.1, which requires an intermediary to use the :authority value for Host and replace any existing Host field.
Root cause
*
HTTP/2 to HTTP/1.1: Host was generated from :authority only when the request had no Host header, so a conflicting client Host was forwarded unchanged.
*
HTTP/2 to HTTP/2: the client Host header was removed and used to overwrite the upstream :authority, after request filters had already run against the original :authority.
*
The HTTP/2 server did not compare Host with :authority and did not reject userinfo in the authority.
Impact
A remote, unauthenticated attacker can send a single HTTP/2 request that the application sees as one host and the upstream receives as another. Where request filters, access controls, or cache keys use the URI authority and the upstream routes by Host, this can lead to:
*
Cache poisoning: a response from another virtual host is stored under the victim host's cache key and served to other users (this also requires the upstream to serve different content per Host).
*
Host-based access control bypass: a request approved for one host is served by a different virtual host on the upstream.
Deployments that do not accept HTTP/2 from clients, or that do not use the request authority for security or caching decisions, are not affected.
Note that Cloudflare CDN customers were unaffected, as internal Pingora services at Cloudflare do not have HTTP/2 clients.
Mitigation:
*
Upgrade to pingora 0.9.0 or later. Pingora now returns 400 Bad Request for HTTP/2 requests whose Host differs from :authority, that contain more than one Host, or whose authority contains userinfo, and keeps the upstream Host or :authority consistent with the request authority. Fix commits: https://github.com/cloudflare/pingora/commit/915590a91811877795531f6ba0927a3138b5cb4b , https://github.com/cloudflare/pingora/commit/ffab8302d08d4292d1924eb8fe84647fd5cb8e76
*
If you cannot upgrade: in request_filter, reject HTTP/2 requests that carry a Host header different from the URI authority, or whose authority contains '@'. |
| An uncontrolled search path element vulnerability in ASUS Armoury Crate allows local users to execute arbitrary code with SYSTEM privileges via replacement of a dynamic-link library (DLL) that is later loaded by a high-privilege process.
Refer to the '
Security Update for Armoury Crate App ' section on the ASUS Security Advisory for more information. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF on lgr list traversal in smcr_port_err()
smcr_port_err() traverses smc_lgr_list.list without holding
smc_lgr_list.lock, allowing a concurrent smc_lgr_terminate_sched()
to free an lgr while it is still being dereferenced.
Hold smc_lgr_list.lock across the traversal. Update
smc_ib_gid_check() to call smcr_port_err() after releasing the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621
The core and io supplies are only requested for ID_MT7530: both the
devm_regulator_get() in probe and the regulator_enable() in
mt7530_setup() are guarded by the switch id, but mt7530_remove()
disables them unconditionally. On an MT7621 or an MT7531 both pointers
are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls
regulator_disable() on NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: clamp freelist reconstruction requests
The firmware reconstruction count controls accesses to the request's
fixed freelist ID array and the copy into the fixed response array.
Neither access currently bounds the count to those protocol arrays.
Clamp the count to the request capacity, which is shared by the response
layout, and use that count consistently for reconstruction and response
publication. Keep the firmware recovery exchange instead of dropping an
oversized request without a response, as discussed with the firmware
maintainer.
The issue was found by our static-analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xps: reject an out of range traffic class
Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and
dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc()
lowers dev->num_tc without touching either array.
netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and
netdev_get_prio_tc_map() returns the entry as it stands, so a leftover
entry is handed out as a traffic class >= dev->num_tc. Taking that
class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a
negative one and indexes an XPS map sized for dev->num_tc classes:
tci = j * num_tc + tc;
RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map);
attr_map[] holds nr_ids * num_tc entries and j runs over the ids named
in the mask, so a class that is not below num_tc pushes tci past the end
of the map for the last ids and the store overruns it.
Any caller that lowers num_tc leaves such entries behind, and
mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than
netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7]
still describe txq 1..7. The splat is from an XPS write to txq 2 on a
veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and
j == 6 stores one past the end of the 88-byte map:
BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954)
Write of size 8 at addr ffff88813016bc58 by task xps_oob/634
__netif_set_xps_queue (net/core/dev.c:2954)
xps_rxqs_store (net/core/net-sysfs.c:1880)
netdev_queue_attr_store (net/core/net-sysfs.c:1390)
Allocated by task 634:
__kmalloc_noprof (mm/slub.c:5439)
__netif_set_xps_queue (net/core/dev.c:2937)
The buggy address is located 0 bytes to the right of
allocated 88-byte region [ffff88813016bc00, ffff88813016bc58)
Reject a class the map has no room for. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: set new_stream to NULL after release
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28) |
| The Academy LMS – AI Course Builder, Quizzes, Certificates & eLearning plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.0.3. This is due to the `add_child()` function calling `add_role('academy_student')` on any existing account resolved from the attacker-supplied `email` parameter before `Store::link()` validates the guardian-ward relationship, and failing to roll back that role write when `Store::link()` returns a `WP_Error`. This makes it possible for authenticated attackers with the `academy_guardian` role or higher to elevate any existing WordPress account — including their own — to the `academy_student` role, gaining `edit_posts` (Contributor-equivalent) capabilities and, when the student file-upload setting is enabled, `upload_files` (Author-equivalent) capabilities not granted to the guardian role. When a guardian supplies their own email address, `email_exists()` resolves to their own user ID, causing `Store::link()` to reject the self-link, but because the `add_role()` call has already executed and is never reversed, the academy_student role grant on their own account persists permanently. |
| The EventON - Subscriber plugin for WordPress is vulnerable to generic SQL Injection via the 'email' parameter in all versions up to, and including, 1.4.5 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Getwid – Gutenberg Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'data-image-points' parameter in all versions up to, and including, 3.0.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: hold IPsec RX state under the XArray lock
nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the
xfrm_state it found. The delete path can erase the entry and drop the last
state reference in that interval. RX can then try to increment a zero
refcount after the state has been queued for destruction.
The driver queues firmware invalidation asynchronously; the delete path
does not wait for the command to complete or drain pending RX processing.
The XFRM garbage collector waits for an RCU grace period before freeing
the state. That delays reclamation but does not make acquiring a reference
from zero valid.
Take the xfrm_state reference before releasing the XArray lock so
xa_erase() cannot run between lookup and reference acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use one headroom snapshot for neighbour replies
vxlan_na_create() samples LL_RESERVED_SPACE() to size the reply skb and then
samples it again to reserve headroom. A concurrent vxlan_changelink() can
update needed_headroom between the two reads, creating a TOCTOU race. The
second value can exceed the allocation and make the Ethernet header write out
of bounds.
The race is reproducible on the unpatched kernel. It occurred when
vxlan_na_create() generated a neighbour reply while vxlan_changelink() changed
the link headroom. KASAN caught a four-byte write two bytes beyond a 704-byte
skbuff_small_head allocation.
Snapshot the headroom once and use that value for both allocation and
reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: Fix error code in smb2_aead_req_alloc()
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer. |
