| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL
dsm_create() initially checks pdev->bus when computing segment_id:
u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0;
But the next two lines unconditionally dereference pdev->bus via
pcie_find_root_port() and especially pci_dev_id(pdev), which expands
to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact
NULL, segment_id is initialised to 0 but the very next statement
crashes the kernel.
smatch flags this:
drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we
previously assumed 'pdev->bus' could be null (see line 251)
Make the NULL handling consistent: if pdev->bus is NULL the device
has no PCI context to work with and SEV TIO setup cannot proceed,
so return -ENODEV before any of the bus-dependent lookups. The
remaining initialisation now runs only on the path where pdev->bus
is known to be valid.
No change for callers where pdev->bus is non-NULL, which is the
only case where dsm_create() did meaningful work before this change. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Fix race condition in event registration
The zynqmp_power driver registers handlers for suspend and subsystem
restart events using register_event(). However, the work structures
(zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by
these handlers were allocated and initialized after the registration
call.
This created a race window where, if the firmware triggered an event
immediately after registration but before allocation, the callback
(suspend_event_callback or subsystem_restart_event_callback) would
dereference a NULL pointer in work_pending(), leading to a crash.
Fix this by allocating and initializing the work structures before
registering the events. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: Add a sanity check for btree node size
Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image,
during the file system mounting process, specifically while loading the
catalog, a corrupted node_size value of 1 caused the rec_off argument
passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively
large. Consequently, the function failed to return a valid value to
initialize the off variable, triggering the bug [1].
Every node starts from BTree node descriptor: struct hfs_bnode_desc.
So, the size of node cannot be lesser than that. However, technical
specification declares that: "The node size (which is expressed in bytes)
must be power of two, from 512 through 32,768, inclusive." Add a check
for btree node size base on technical specification.
[1]
BUG: KMSAN: uninit-value in hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584
hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584
hfsplus_btree_open+0x169a/0x1e40 fs/hfsplus/btree.c:382
hfsplus_fill_super+0x111f/0x2770 fs/hfsplus/super.c:553
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
hfsplus_get_tree+0x35/0x40 fs/hfsplus/super.c:709
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (occ) unregister sysfs devices outside occ lock
occ_active(false) and occ_shutdown() unregister sysfs-backed devices while
occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can
wait for active sysfs callbacks to drain, and those callbacks can enter the
OCC update path and try to take occ->lock again. That gives the unregister
paths the lock ordering occ->lock -> sysfs callback drain, while a callback
has the opposite edge sysfs callback -> occ->lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real unregister and callback carrier:
occ_shutdown()
hwmon_device_unregister()
occ_show_temp_1()
occ_update_response()
Lockdep reported the circular dependency with occ_shutdown() already
holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs
side:
WARNING: possible circular locking dependency detected
... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv]
... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv]
occ_update_response.isra.0+0xb/0x20 [vuln_msv]
occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv]
*** DEADLOCK ***
Serialize hwmon registration and removal with a separate hwmon_lock.
Under that lock, detach occ->hwmon and update occ->active while occ->lock
is held so concurrent OCC state changes still see a stable state, then
drop occ->lock before calling hwmon_device_unregister(). Remove the
driver sysfs group before taking occ->lock in occ_shutdown(), so draining
the driver attributes cannot wait while the OCC mutex is held. Also make
OCC update callbacks return -ENODEV after deactivation, so callbacks that
already passed sysfs active protection do not poll the hardware after
teardown has detached the hwmon device. |
| In the Linux kernel, the following vulnerability has been resolved:
tools/power/x86/intel-speed-select: Harden daemon pidfile open
Avoid symlink-based pidfile clobbering by opening the pidfile with
O_NOFOLLOW and validating it with fstat() before locking/writing.
The daemon currently uses a fixed pidfile path under /tmp. A local
unprivileged user can pre-create a symlink at that path and cause a
root-run daemon instance to write into an attacker-chosen file. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size
Two sites in vmwgfx_resource.c assign boolean literals to
res->guest_memory_size, which is an unsigned long allocation-size
field; the intended target is the adjacent res->guest_memory_dirty
bitfield. After the assignments the field holds 0 or 1 instead of
the resource's MOB allocation size:
- vmw_resource_release() writes 0 (false), and
- vmw_resource_unbind_list() writes 1 (true).
Subsequent revalidation paths read guest_memory_size when computing
the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer
allocation size (vmw_resource_buf_alloc()), producing zero-length
walks or wrap-around ranges that read or write past the MOB bitmap.
The dirty-tracking intent of the original code (mark the resource as
dirtied since the last sync) is also lost, since guest_memory_dirty
is never updated.
Rename both assignments to guest_memory_dirty. |
| A vulnerability was detected in iswalle getnote-mcp up to 1.5.0. The affected element is the function fs.readFileSync of the file src/index.ts of the component upload_image. Performing a manipulation of the argument image_path results in path traversal. The attack can be initiated remotely. The exploit is now public and may be used. Upgrading to version 1.5.1 is sufficient to fix this issue. The patch is named 7f9a215e03575c650d38c8f87fc6d8d363fed80d. Upgrading the affected component is advised. |
| An issue in the inviteController.js component in Bluewave Labs Checkmate <=3.3.0 allows remote authenticated administrators to escalate privileges to superadmin via the role parameter to the /api/v1/invite endpoint. |
| SvelteKit (@sveltejs/kit) versions >=2.49.0 and <=2.52.1 with experimental remote functions (experimental.remoteFunctions) and form enabled contain a memory exhaustion vulnerability in remote form deserialization. Malformed form data can cause excessive memory allocation, crashing the server process and resulting in denial of service. Fixed in 2.52.2. |
| SvelteKit versions from 2.38.0 before 2.60.1 contain a race condition in query.batch that allows concurrent requests from different users to merge under a single request context. Attackers can exploit specific timing conditions to access sensitive data from other users' concurrent requests. |
| gitoxide versions from 0.25.4 contain an HTTP credential leak vulnerability in the curl-based transport backend where credentials are sent to attacker-controlled servers after HTTP redirects. The vulnerability occurs because credential validation checks the original URL instead of the effective URL after redirect, allowing attackers to steal authentication tokens through cross-domain redirects or HTTPS-to-HTTP downgrades. |
| gitoxide (Rust crates gix <= 0.72.0 and gix-validate <= 0.10.0) contains a path traversal vulnerability. The submodule name validation function in gix-validate only checks the first occurrence of '..' via name.find(b".."), allowing crafted names such as 'a..b/../../../.git/' to bypass the check; additionally this validation is never invoked in production code paths. Combined with a trust inheritance flaw in Submodule::open(), where the parent repository's git_dir_trust (Trust::Full) is cloned and the ownership verification is skipped, an attacker can craft a malicious .gitmodules file so that a victim tool built on gitoxide reads arbitrary git repository configuration (including embedded credentials) with full trust, bypassing safe-directory protections. Fixed in gix 0.82.0 and gix-validate 0.11.1. |
| gitoxide gix-packetline versions before 0.21.5 contain a panic vulnerability in the TextRef implementation that occurs when processing side-band packet lines with empty payloads. A malicious Git server can send a crafted side-band packet to trigger an index out of bounds panic, aborting the client process during fetch operations without authentication. |
| gix-worktree-state before 0.33.0 (part of gitoxide) allows writing files outside the worktree on Windows. gix_worktree_state::checkout() follows an existing terminal symlink during non-exclusive (incremental) materialization (destination_is_initially_empty: false) when core.symlinks is true. If a symlink entry (mode 120000) is first checked out at a path P pointing outside the worktree, a subsequent incremental checkout of a regular-file entry (mode 100644) at the same path follows the existing reparse point and writes the blob content through the link, overwriting files outside the worktree. |
| filebrowser from version 2.24.0 contains a race condition in the TUS upload handler that allows authenticated users to write past the declared Upload-Length by sending concurrent PATCH requests. Attackers can send multiple simultaneous PATCH requests at the same offset to bypass length validation, resulting in files that exceed their declared size and triggering completion hooks for oversized uploads. |
| filebrowser through 2.63.23 fails to validate named pipes in directory archive and public download handlers, allowing attackers to trigger blocking open syscalls. Authenticated users or anonymous visitors with public share links can repeatedly request archives containing named pipes to pin server goroutines and exhaust connection resources. |
| SiYuan versions before v3.8.1 contain a server-side request forgery vulnerability in the http_request and web_fetch agent tools that perform DNS resolution only at guard time without validating the connect-time resolution. Attackers can use DNS rebinding to answer the guard resolution with a public IP and the connect resolution with a private or metadata IP, bypassing the SSRF defense to access cloud instance metadata and internal services. |
| SiYuan before v3.8.1 contains a path traversal vulnerability in the asset.upload MCP tool that accepts arbitrary absolute file paths without workspace boundary validation. Attackers can induce the AI Agent to upload sensitive files such as SSH keys or credentials from outside the workspace into the asset directory through prompt injection. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable xfrm_decode_session hook attachment
BPF LSM programs can currently attach to xfrm_decode_session(). That
hook may return an error, but security_skb_classify_flow() calls it
from a void path and triggers BUG_ON() if an error is returned.
Disable BPF attachment to the hook to prevent a BPF LSM program from
turning packet classification into a full panic. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound the look-ahead attribute-list entry in ntfs_external_attr_find()
When resolving an attribute lookup with a non-zero @lowest_vcn,
ntfs_external_attr_find() peeks at the next $ATTRIBUTE_LIST entry to
decide whether to keep searching, but bounds that not-yet-validated
entry only with "(u8 *)next_al_entry + 6 < al_end" (which proves just
bytes 0..6 are in range) and "(u8 *)next_al_entry + length <= al_end"
with an attacker-controlled, non-8-aligned length. It then reads
next_al_entry->lowest_vcn (an __le64 at offset 8) and the name at
next_al_entry->name_offset, both of which can lie past al_end -- the
exact end of the kvmalloc'd attribute-list buffer (allocated at the
on-disk attr_list_size, no rounding). A crafted on-disk $ATTRIBUTE_LIST
whose last entry sits a few bytes before al_end therefore yields a slab
out-of-bounds read when the inode is read.
Validate the look-ahead entry with ntfs_attr_list_entry_is_valid() (added
in patch 1/3) before dereferencing lowest_vcn and the name, so the same
fixed-header, length and name bounds the main attribute-list walk uses now
guard this read too. |
