| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: do not leave stale header offsets after pskb_carve()
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove
the first bytes of a packet and reallocate skb->head.
All the headers that were present before the operation are gone,
but both functions call skb_headers_offset_update(skb, 0), which
is a no-op : skb->mac_header, skb->network_header,
skb->transport_header and skb->csum_start keep their old values and
now describe bytes which are no longer there.
Both helpers size the new head from the old skb_end_offset(), so the
stale offsets still land inside the new allocation. They point past
skb_tail_pointer() though, to bytes that were never initialized.
pskb_carve_inside_nonlinear() is the worst case, because it leaves a
zombie skb with an empty linear part (skb->data ==
skb_tail_pointer(skb), skb_headlen(skb) == 0), while
skb_mac_header_was_set() is still true and skb->mac_header is way
ahead of skb->data.
The only user of pskb_extract() is rds_tcp_data_recv(), and the
carved skb is queued on tinc->ti_skb_list. When the RDS incoming
message is released, rds_tcp_inc_free() calls skb_queue_purge(),
which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is
visible from drop_monitor, which then tries to pull back to the
(bogus) mac header :
skbuff: __skb_pull(len=234)
skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0
end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288
shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5))
csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0)
hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60
kernel BUG at ./include/linux/skbuff.h:2847!
Add skb_carve_reset_headers() to mark the mac and transport headers
as not set, reset the network header, clear skb->mac_len, and drop
a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes
anything).
Invalidate the inner offsets as well. Unlike mac_header and
transport_header they have no "unset" sentinel, so a leftover
non-zero value still looks like a real header. Zero
skb->inner_mac_header, skb->inner_network_header,
skb->inner_transport_header, skb->inner_protocol and
skb->encapsulation, so that all the header state is invalidated in
one place.
v2: fixed an inaccurate changelog. The stale offsets stay inside the
new skb->head, which is never smaller than the old one, they
simply point past skb_tail_pointer() to bytes that are gone.
Thanks to Xuanqiang Luo for insisting on this.
Also invalidate the inner header state, as suggested by the
netdev AI review :
https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: ring the doorbell if a burst ends in a drop
fbnic_tx_map() skips the doorbell write, and the completion request,
for every packet handed to it with xmit_more set, counting on the
packet which ends the burst to publish them all. When that packet is
dropped instead - skb_put_padto(), skb_cow_head() or a DMA mapping
failure - nothing rings. The descriptors of the preceding packets stay
invisible to the HW until the next transmit on that queue, which for a
burst-then-idle workload may never come.
Remember the meta descriptor of the last packet left without a doorbell
and flush it from the error paths. The completion request has to be set
on that descriptor rather than simply writing the tail, otherwise the HW
would transmit the packets but never report a head, and the ring would
fill up and stall for good.
This is very similar to Joe's recent series of fixes for bnxt.
Not seen in real life, reproduced under QEMU with failure injection. |
| In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE() from the dev_fill_forward_path() loop check
ipip_fill_forward_path() and ip6_tnl_fill_forward_path() look up the
route to the tunnel's remote endpoint and set ctx->dev to its device,
which is the tunnel itself when that route resolves back to the tunnel.
dev_fill_forward_path() then makes no progress and trips
WARN_ON_ONCE(last_dev == ctx->dev) as soon as a flowtable tries to
offload a flow through the tunnel. That routing loop is a configuration
any CAP_NET_ADMIN user can set up, and ip_tunnel_xmit() and
ip6_tnl_xmit() already treat it as a tx error, so remove the warning and
just fail the walk, as commit 008e7a7c293b ("net: remove WARN_ON_ONCE
when accessing forward path array") did for the path stack overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/i2c: Disable IRQ on unbind
Currently, struct xe_i2c is freed before SGUnit IRQ is disabled in unbind
path, leaving a potential UAF in case I2C IRQ is hit during this small
window. Explicitly disable I2C IRQ in xe_i2c_remove() and fix this.
(cherry picked from commit 8ba5c8b8ab3fd362267c11df2cd5a90ee46f6e24) |
| Reliance on Obfuscation or Encryption of Security-Relevant Inputs without Integrity Checking vulnerability in danielberkompas cloak allows an attacker with write access to stored ciphertext to make it decrypt to a chosen value via bit flipping.
Cloak.Ciphers.AES.CTR encrypts with AES-256 in CTR mode and stores the key tag, the IV and the ciphertext with no MAC. decrypt/2 checks only the key tag and the minimum length before it returns the plaintext, and Cloak.Ciphers.Deprecated.AES.CTR decrypts the legacy format the same way. CTR is a stream cipher, so a value XORed into the stored ciphertext is XORed into the plaintext at the same offset. An attacker who can write to the encrypted store (for example through SQL injection or a compromised replica) and who knows or can guess a stored plaintext can replace it with any value of the same length. The application receives that value with no error.
This issue affects cloak: from 0.1.0-pre onward. |
| Use of Password Hash With Insufficient Computational Effort vulnerability in danielberkompas cloak_ecto and danielberkompas cloak allows an attacker who holds the hashed values and the configured secret to brute-force low-entropy plaintexts much faster than configured.
The dump/1 callback that Cloak.Ecto.PBKDF2 (Cloak.Fields.PBKDF2 in cloak before the Ecto code moved to cloak_ecto) injects into a field module calls :pbkdf2.pbkdf2/4 with config[:size] in the iteration-count position. The :iterations setting is validated but never used. With the cloak_ecto defaults (iterations: 600_000, size: 32) each hash runs 32 PBKDF2 rounds instead of 600,000, so offline guessing of values such as email addresses costs about 18,750 times less than configured.
This issue affects cloak_ecto: from 1.0.0-alpha.0 onward; cloak: from 0.7.0 before 1.0.0-alpha.0. |
| This vulnerability exists in the Schmooze app due to the use of hardcoded credentials and cryptographic keys in the client application. An unauthenticated remote attacker could exploit this vulnerability by decompiling the distributed application package and extracting the embedded credentials and cryptographic keys.
Successful exploitation of this vulnerability could allow the attacker to gain unauthorized access to backend and cloud resources and forge client requests on the targeted system. |
| In the WibuKey driver for Windows below Version 6.72, insufficient validation of user input when calculating the size of a kernel buffer could cause small amounts of data to be written outside the intended kernel buffer. This can lead to a system crash. Under unfavorable circumstances, adjacent kernel memory may be modified. |
| An open redirect vulnerability exists in the PingGateway Fragment Filter feature. This issue affects PingGateway versions 7.1.0 and later, 2023.2.0 through 2024.11.1, and 2025.3.0 through 2025.11.1. It is fixed in versions 2024.11.2, 2025.11.2, and 2026.3.0 (and later). |
| Insufficient verification of data authenticity (CWE-345) in the external OIDC login callback in Cloud Foundry UAA v4.5.0 to v79.6.0 (inclusive) allows an authenticated UAA user to bypass the OAuth authorization-code exchange and establish an authenticated external-OIDC browser session, via submitting a UAA access token or a cross-client ID token as the callback’s id_token parameter.
The issue only manifests when a UAA zone is configured with an OIDC identity provider whose issuer exactly matches that zone’s own /oauth/token endpoint (a “self-UAA” OIDC configuration). In this configuration, the callback takes a supplied id_token directly instead of requiring the authorization code exchange, and does not verify that the token was actually issued as an ID token for the specific self-OIDC relying-party client. An attacker holding any valid UAA JWT for themselves — including a plain access token with only uaa.user scope, or a valid ID token issued to an unrelated client such as cf — can present it as the callback’s id_token and be authenticated into a mapped local (“shadow”) account. Because the resulting session is not verified against the originating token’s true audience or user_id, its effective privilege depends entirely on the shadow account’s group memberships, which can include administrative scopes such as clients.write.
Exploitation requires a valid UAA user JWT, a valid browser login state for the target zone, and the presence of a self-referential OIDC provider configuration — this is not a pre-authentication vulnerability, and does not by itself grant privileges beyond those already held by the mapped shadow account. |
| Memory corruption while processing service requests. |
| Memory Corruption when executing system service routines due to improper handling of user input buffers. |
| SQL injection (SQLi) vulnerability in the eLoanApp application, specifically in the POST parameter 'logina' of the user process endpoint '/ajax/users.php?op=verify'. The parameter is vulnerable to boolean-based and time-based SQL injection. Successfully exploiting this vulnerability would allow an attacker to discover the platform's database engine and cause delays in database queries. |
| A vulnerability was identified in SourceCodester Simple Student Information System 1.0. This issue affects some unknown processing of the file /register.php of the component Profile Field Handler. The manipulation of the argument firstname/lastname leads to cross site scripting. The attack may be initiated remotely. The exploit is publicly available and might be used. |
| Missing Authorization vulnerability in Themekraft BuddyForms buddyforms allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects BuddyForms: from n/a through 2.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasing host").
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior while preventing a second cleanup of
the failed tree. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix NULL sched deref in kfunc sub-sched error paths
When the root scheduler has sub-scheds attached, the COMPAT kfunc
wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse
the call and report to @p's scheduler:
scx_error(scx_task_sched(p), "... must be used");
The wrappers are reachable with tasks that have no scheduler.
scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which
scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs;
scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which
ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the
group has no kf_tasks validation, and scx_dsq_insert_preamble() checks
task ownership with scx_task_on_sched() precisely because @p may be an
arbitrary task.
scx_task_sched(p) is p->scx.sched, which is NULL for tasks past
sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on
exit -- and for idle tasks, which the enable paths skip as they are
never scheduled through SCX. It is also an rcu_dereference_protected()
that expects @p's pi_lock or rq lock, which neither wrapper holds.
Passing NULL to scx_error() reaches scx_vexit(), which dereferences
sch->exit_info, oopsing the kernel.
One concrete trigger exercised while developing the fix: a
BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an
exited-but-not-reaped task while a sub-scheduler was attached (its pid
stays findable while the zombie is unreaped; faulting instruction is
the scx_vexit() prologue "mov r15,[rdi+0x398]" with RDI=NULL and 0x398
the offset of sch->exit_info):
sched_ext: BPF scheduler "kfunc_subsched_null" enabled
sched_ext: BPF sub-scheduler "kfunc_subsched_null" enabled
sched_ext: Unassociated program run_select_cpu_ (id 76)
BUG: kernel NULL pointer dereference, address: 0000000000000398
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 0 PID: 8201 Comm: kfunc_test_runn Tainted: G W
RIP: 0010:scx_vexit+0x25/0xa0
Code: ... <4c> 8b bf 98 03 00 00 ...
CR2: 0000000000000398
Call Trace:
<TASK>
__scx_exit+0x4f/0x70
scx_bpf_select_cpu_and+0xab/0xb0
bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7
? __x64_sys_bpf+0x2c/0x40
bpf_prog_test_run_syscall+0x130/0x2f0
__sys_bpf+0x930/0x10d0
? __x64_sys_bpf+0x2c/0x40
__x64_sys_bpf+0x2c/0x40
do_syscall_64+0xbc/0x460
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Read @p's scheduler under RCU instead, which the wrappers can do from
their guard(rcu)(): fault it when it can be determined, and when it
can't be determined -- @p is a task past sched_ext_dead() or an idle
task -- there is nothing obviously wrong to report, so just refuse the
call as before without faulting any scheduler.
These COMPAT wrappers are scheduled for eventual removal once the
deprecation grace period elapses, but until then -- and regardless of
their removal timeline -- they must not oops the kernel on a task they
are handed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: retain mapped dropbehind folios
Fault-around can map ready dropbehind folios without going through the
normal page-cache lookup that clears dropbehind. A mapping represents a
competing cached user, so retain the folio instead of forcibly unmapping
it when writeback completes.
For a mapped folio, folio_unmap_invalidate() can call
unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining
mapped folios avoids this path when folio_end_dropbehind() runs in
non-preemptible task context.
Tal was able to trigger a sleeping-in-atomic warning due to this [1].
Unmapped dropbehind folios continue through the existing invalidation path. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: ms_block: destroy io_queue workqueue on removal
msb_init_disk() creates the per-card ordered workqueue msb->io_queue with
alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only
on the init error path; msb_remove() never destroys it. msb_stop() merely
flushes the queue, and neither msb_data_clear() nor put_disk() free it. As
a result every card insert/remove cycle leaks the workqueue and its
kworker, exhausting kernel memory over repeated cycles.
Destroy the workqueue in msb_remove() after the disk has been removed and
the queue drained. |
