| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix memleak for 'conf->bio_split'
In the error path of raid10_run(), 'conf' need be freed, however,
'conf->bio_split' is missed and memory will be leaked.
Since there are 3 places to free 'conf', factor out a helper to fix the
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: clean mc addresses in application firmware when closing port
When moving devices from one namespace to another, mc addresses are
cleaned in software while not removed from application firmware. Thus
the mc addresses are remained and will cause resource leak.
Now use `__dev_mc_unsync` to clean mc addresses when closing port. |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: fix memory leak of waitqueues in autofs_catatonic_mode
Syzkaller reports a memory leak:
BUG: memory leak
unreferenced object 0xffff88810b279e00 (size 96):
comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'.....
08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'.............
backtrace:
[<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
[<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline]
[<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378
[<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593
[<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619
[<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897
[<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910
[<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline]
[<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline]
[<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
[<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
autofs_wait_queue structs should be freed if their wait_ctr becomes zero.
Otherwise they will be lost.
In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new
waitqueue struct is allocated in autofs_wait(), its initial wait_ctr
equals 2. After that wait_event_killable() is interrupted (it returns
-ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not
satisfied. Actually, this condition can be satisfied when
autofs_wait_release() or autofs_catatonic_mode() is called and, what is
also important, wait_ctr is decremented in those places. Upon the exit of
autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process
begins: kill_sb calls autofs_catatonic_mode(), which should have freed the
waitqueues, but it only decrements its usage counter to zero which is not
a correct behaviour.
edit:imk
This description is of course not correct. The umount performed as a result
of an expire is a umount of a mount that has been automounted, it's not the
autofs mount itself. They happen independently, usually after everything
mounted within the autofs file system has been expired away. If everything
hasn't been expired away the automount daemon can still exit leaving mounts
in place. But expires done in both cases will result in a notification that
calls autofs_wait_release() with a result status. The problem case is the
summary execution of of the automount daemon. In this case any waiting
processes won't be woken up until either they are terminated or the mount
is umounted.
end edit: imk
So in catatonic mode we should free waitqueues which counter becomes zero.
edit: imk
Initially I was concerned that the calling of autofs_wait_release() and
autofs_catatonic_mode() was not mutually exclusive but that can't be the
case (obviously) because the queue entry (or entries) is removed from the
list when either of these two functions are called. Consequently the wait
entry will be freed by only one of these functions or by the woken process
in autofs_wait() depending on the order of the calls.
end edit: imk |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sprd: Fix DMA buffer leak issue
Release DMA buffer when _probe() returns failure to avoid memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/pmem: Fix nvdimm registration races
A loop of the form:
while true; do modprobe cxl_pci; modprobe -r cxl_pci; done
...fails with the following crash signature:
BUG: kernel NULL pointer dereference, address: 0000000000000040
[..]
RIP: 0010:cxl_internal_send_cmd+0x5/0xb0 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_pmem_ctl+0x121/0x240 [cxl_pmem]
nvdimm_get_config_data+0xd6/0x1a0 [libnvdimm]
nd_label_data_init+0x135/0x7e0 [libnvdimm]
nvdimm_probe+0xd6/0x1c0 [libnvdimm]
nvdimm_bus_probe+0x7a/0x1e0 [libnvdimm]
really_probe+0xde/0x380
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__device_attach_driver+0x85/0x110
bus_for_each_drv+0x7d/0xc0
__device_attach+0xb4/0x1e0
bus_probe_device+0x9f/0xc0
device_add+0x445/0x9c0
nd_async_device_register+0xe/0x40 [libnvdimm]
async_run_entry_fn+0x30/0x130
...namely that the bottom half of async nvdimm device registration runs
after the CXL has already torn down the context that cxl_pmem_ctl()
needs. Unlike the ACPI NFIT case that benefits from launching multiple
nvdimm device registrations in parallel from those listed in the table,
CXL is already marked PROBE_PREFER_ASYNCHRONOUS. So provide for a
synchronous registration path to preclude this scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix an out of bounds error in BIOS parser
The array is hardcoded to 8 in atomfirmware.h, but firmware provides
a bigger one sometimes. Deferencing the larger array causes an out
of bounds error.
commit 4fc1ba4aa589 ("drm/amd/display: fix array index out of bound error
in bios parser") fixed some of this, but there are two other cases
not covered by it. Fix those as well. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: drop unnecessary user-triggerable WARN_ONCE in verifierl log
It's trivial for user to trigger "verifier log line truncated" warning,
as verifier has a fixed-sized buffer of 1024 bytes (as of now), and there are at
least two pieces of user-provided information that can be output through
this buffer, and both can be arbitrarily sized by user:
- BTF names;
- BTF.ext source code lines strings.
Verifier log buffer should be properly sized for typical verifier state
output. But it's sort-of expected that this buffer won't be long enough
in some circumstances. So let's drop the check. In any case code will
work correctly, at worst truncating a part of a single line output. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp_qoriq: fix memory leak in probe()
Smatch complains that:
drivers/ptp/ptp_qoriq.c ptp_qoriq_probe()
warn: 'base' from ioremap() not released.
Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'.
This is only a bug if ptp_qoriq_init() returns on the
first -ENODEV error path.
For other error paths ptp_qoriq->base and base are the same.
And this change makes the code more readable. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: refuse to create ea block when umounted
The ea block expansion need to access s_root while it is
already set as NULL when umount is triggered. Refuse this
request to avoid panic. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: meson_sm: fix to avoid potential NULL pointer dereference
of_match_device() may fail and returns a NULL pointer.
Fix this by checking the return value of of_match_device. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
Smatch reports:
drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn:
'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032.
The issue is fixed by using a managed clock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx
For the reasons also described in commit b383e8abed41 ("wifi: ath9k: avoid
uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should
validate pkt_len before accessing the SKB.
For example, the obtained SKB may have been badly constructed with
pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr
but after being processed in ath9k_htc_rx_msg() and passed to
ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI
command header which should be located inside its data payload.
Implement sanity checking inside ath9k_wmi_ctrl_rx(). Otherwise, uninit
memory can be referenced.
Tested on Qualcomm Atheros Communications AR9271 802.11n .
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Get source vCPUs from source VM for SEV-ES intrahost migration
Fix a goof where KVM tries to grab source vCPUs from the destination VM
when doing intrahost migration. Grabbing the wrong vCPU not only hoses
the guest, it also crashes the host due to the VMSA pointer being left
NULL.
BUG: unable to handle page fault for address: ffffe38687000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 39 PID: 17143 Comm: sev_migrate_tes Tainted: GO 6.5.0-smp--fff2e47e6c3b-next #151
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.28.0 07/10/2023
RIP: 0010:__free_pages+0x15/0xd0
RSP: 0018:ffff923fcf6e3c78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffe38687000000 RCX: 0000000000000100
RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffe38687000000
RBP: ffff923fcf6e3c88 R08: ffff923fcafb0000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffffff83619b90 R12: ffff923fa9540000
R13: 0000000000080007 R14: ffff923f6d35d000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff929d0d7c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffe38687000000 CR3: 0000005224c34005 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
sev_free_vcpu+0xcb/0x110 [kvm_amd]
svm_vcpu_free+0x75/0xf0 [kvm_amd]
kvm_arch_vcpu_destroy+0x36/0x140 [kvm]
kvm_destroy_vcpus+0x67/0x100 [kvm]
kvm_arch_destroy_vm+0x161/0x1d0 [kvm]
kvm_put_kvm+0x276/0x560 [kvm]
kvm_vm_release+0x25/0x30 [kvm]
__fput+0x106/0x280
____fput+0x12/0x20
task_work_run+0x86/0xb0
do_exit+0x2e3/0x9c0
do_group_exit+0xb1/0xc0
__x64_sys_exit_group+0x1b/0x20
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
CR2: ffffe38687000000 |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: fix NULL pointer dereference
vduse_vdpa_set_vq_affinity callback can be called
with NULL value as cpu_mask when deleting the vduse
device.
This patch resets virtqueue's IRQ affinity mask value
to set all CPUs instead of dereferencing NULL cpu_mask.
[ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 4760.959110] #PF: supervisor read access in kernel mode
[ 4760.964247] #PF: error_code(0x0000) - not-present page
[ 4760.969385] PGD 0 P4D 0
[ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4
[ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020
[ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130
[ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66
[ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246
[ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400
[ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898
[ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000
[ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000
[ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10
[ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000
[ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0
[ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4761.088909] PKRU: 55555554
[ 4761.091620] Call Trace:
[ 4761.094074] <TASK>
[ 4761.096180] ? __die+0x1f/0x70
[ 4761.099238] ? page_fault_oops+0x171/0x4f0
[ 4761.103340] ? exc_page_fault+0x7b/0x180
[ 4761.107265] ? asm_exc_page_fault+0x22/0x30
[ 4761.111460] ? memcpy_orig+0xc5/0x130
[ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse]
[ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net]
[ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net]
[ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net]
[ 4761.136580] virtio_dev_remove+0x3a/0x90
[ 4761.140509] device_release_driver_internal+0x19b/0x200
[ 4761.145742] bus_remove_device+0xc2/0x130
[ 4761.149755] device_del+0x158/0x3e0
[ 4761.153245] ? kernfs_find_ns+0x35/0xc0
[ 4761.157086] device_unregister+0x13/0x60
[ 4761.161010] unregister_virtio_device+0x11/0x20
[ 4761.165543] device_release_driver_internal+0x19b/0x200
[ 4761.170770] bus_remove_device+0xc2/0x130
[ 4761.174782] device_del+0x158/0x3e0
[ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa]
[ 4761.183336] device_unregister+0x13/0x60
[ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa] |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: fixup btree_cache_wait list damage
We get a kernel crash about "list_add corruption. next->prev should be
prev (ffff9c801bc01210), but was ffff9c77b688237c.
(next=ffffae586d8afe68)."
crash> struct list_head 0xffff9c801bc01210
struct list_head {
next = 0xffffae586d8afe68,
prev = 0xffffae586d8afe68
}
crash> struct list_head 0xffff9c77b688237c
struct list_head {
next = 0x0,
prev = 0x0
}
crash> struct list_head 0xffffae586d8afe68
struct list_head struct: invalid kernel virtual address: ffffae586d8afe68 type: "gdb_readmem_callback"
Cannot access memory at address 0xffffae586d8afe68
[230469.019492] Call Trace:
[230469.032041] prepare_to_wait+0x8a/0xb0
[230469.044363] ? bch_btree_keys_free+0x6c/0xc0 [escache]
[230469.056533] mca_cannibalize_lock+0x72/0x90 [escache]
[230469.068788] mca_alloc+0x2ae/0x450 [escache]
[230469.080790] bch_btree_node_get+0x136/0x2d0 [escache]
[230469.092681] bch_btree_check_thread+0x1e1/0x260 [escache]
[230469.104382] ? finish_wait+0x80/0x80
[230469.115884] ? bch_btree_check_recurse+0x1a0/0x1a0 [escache]
[230469.127259] kthread+0x112/0x130
[230469.138448] ? kthread_flush_work_fn+0x10/0x10
[230469.149477] ret_from_fork+0x35/0x40
bch_btree_check_thread() and bch_dirty_init_thread() may call
mca_cannibalize() to cannibalize other cached btree nodes. Only one thread
can do it at a time, so the op of other threads will be added to the
btree_cache_wait list.
We must call finish_wait() to remove op from btree_cache_wait before free
it's memory address. Otherwise, the list will be damaged. Also should call
bch_cannibalize_unlock() to release the btree_cache_alloc_lock and wake_up
other waiters. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: imx: disable Ageing Timer interrupt request irq
There maybe pending USR interrupt before requesting irq, however
uart_add_one_port has not executed, so there will be kernel panic:
[ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre
ss 0000000000000080
[ 0.802701] Mem abort info:
[ 0.805367] ESR = 0x0000000096000004
[ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.814033] SET = 0, FnV = 0
[ 0.816950] EA = 0, S1PTW = 0
[ 0.819950] FSC = 0x04: level 0 translation fault
[ 0.824617] Data abort info:
[ 0.827367] ISV = 0, ISS = 0x00000004
[ 0.831033] CM = 0, WnR = 0
[ 0.833866] [0000000000000080] user address but active_mm is swapper
[ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 0.845953] Modules linked in:
[ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1
[ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT)
[ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0
[ 0.872283] lr : imx_uart_int+0xf8/0x1ec
The issue only happends in the inmate linux when Jailhouse hypervisor
enabled. The test procedure is:
while true; do
jailhouse enable imx8mp.cell
jailhouse cell linux xxxx
sleep 10
jailhouse cell destroy 1
jailhouse disable
sleep 5
done
And during the upper test, press keys to the 2nd linux console.
When `jailhouse cell destroy 1`, the 2nd linux has no chance to put
the uart to a quiese state, so USR1/2 may has pending interrupts. Then
when `jailhosue cell linux xx` to start 2nd linux again, the issue
trigger.
In order to disable irqs before requesting them, both UCR1 and UCR2 irqs
should be disabled, so here fix that, disable the Ageing Timer interrupt
in UCR2 as UCR1 does. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: Fix double-free of elf header buffer
After
b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer"),
freeing image->elf_headers in the error path of crash_load_segments()
is not needed because kimage_file_post_load_cleanup() will take
care of that later. And not clearing it could result in a double-free.
Drop the superfluous vfree() call at the error path of
crash_load_segments(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Move representor neigh cleanup to profile cleanup_tx
For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as
the flow is duplicated to the peer eswitch, the related neighbour
information on the peer uplink representor is created as well.
In the cited commit, eswitch devcom unpair is moved to uplink unload
API, specifically the profile->cleanup_tx. If there is a encap rule
offloaded in ECMP mode, when one eswitch does unpair (because of
unloading the driver, for instance), and the peer rule from the peer
eswitch is going to be deleted, the use-after-free error is triggered
while accessing neigh info, as it is already cleaned up in uplink's
profile->disable, which is before its profile->cleanup_tx.
To fix this issue, move the neigh cleanup to profile's cleanup_tx
callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh
init is moved to init_tx for symmeter.
[ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496
[ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15
[ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2453.384335] Call Trace:
[ 2453.384625] <TASK>
[ 2453.384891] dump_stack_lvl+0x33/0x50
[ 2453.385285] print_report+0xc2/0x610
[ 2453.385667] ? __virt_addr_valid+0xb1/0x130
[ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.386757] kasan_report+0xae/0xe0
[ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core]
[ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core]
[ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core]
[ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core]
[ 2453.391015] ? complete_all+0x43/0xd0
[ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core]
[ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core]
[ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core]
[ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core]
[ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core]
[ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core]
[ 2453.395268] ? down_write+0xaa/0x100
[ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core]
[ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core]
[ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core]
[ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core]
[ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core]
[ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core]
[ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core]
[ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core]
[ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core]
[ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core]
[ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core]
[ 2453.405170] ? up_write+0x39/0x60
[ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0
[ 2453.405985] auxiliary_bus_remove+0x2e/0x40
[ 2453.406405] device_release_driver_internal+0x243/0x2d0
[ 2453.406900] ? kobject_put+0x42/0x2d0
[ 2453.407284] bus_remove_device+0x128/0x1d0
[ 2453.407687] device_del+0x240/0x550
[ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0
[ 2453.408511] ? kobject_put+0xfa/0x2d0
[ 2453.408889] ? __kmem_cache_free+0x14d/0x280
[ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core]
[ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core]
[ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core]
[ 2453.411111] remove_one+0x89/0x130 [mlx5_core]
[ 24
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: release path before inode lookup during the ino lookup ioctl
During the ino lookup ioctl we can end up calling btrfs_iget() to get an
inode reference while we are holding on a root's btree. If btrfs_iget()
needs to lookup the inode from the root's btree, because it's not
currently loaded in memory, then it will need to lock another or the
same path in the same root btree. This may result in a deadlock and
trigger the following lockdep splat:
WARNING: possible circular locking dependency detected
6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Not tainted
------------------------------------------------------
syz-executor277/5012 is trying to acquire lock:
ffff88802df41710 (btrfs-tree-01){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
but task is already holding lock:
ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-tree-00){++++}-{3:3}:
down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
__btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
btrfs_search_slot+0x13a4/0x2f80 fs/btrfs/ctree.c:2302
btrfs_init_root_free_objectid+0x148/0x320 fs/btrfs/disk-io.c:4955
btrfs_init_fs_root fs/btrfs/disk-io.c:1128 [inline]
btrfs_get_root_ref+0x5ae/0xae0 fs/btrfs/disk-io.c:1338
btrfs_get_fs_root fs/btrfs/disk-io.c:1390 [inline]
open_ctree+0x29c8/0x3030 fs/btrfs/disk-io.c:3494
btrfs_fill_super+0x1c7/0x2f0 fs/btrfs/super.c:1154
btrfs_mount_root+0x7e0/0x910 fs/btrfs/super.c:1519
legacy_get_tree+0xef/0x190 fs/fs_context.c:611
vfs_get_tree+0x8c/0x270 fs/super.c:1519
fc_mount fs/namespace.c:1112 [inline]
vfs_kern_mount+0xbc/0x150 fs/namespace.c:1142
btrfs_mount+0x39f/0xb50 fs/btrfs/super.c:1579
legacy_get_tree+0xef/0x190 fs/fs_context.c:611
vfs_get_tree+0x8c/0x270 fs/super.c:1519
do_new_mount+0x28f/0xae0 fs/namespace.c:3335
do_mount fs/namespace.c:3675 [inline]
__do_sys_mount fs/namespace.c:3884 [inline]
__se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (btrfs-tree-01){++++}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3142 [inline]
check_prevs_add kernel/locking/lockdep.c:3261 [inline]
validate_chain kernel/locking/lockdep.c:3876 [inline]
__lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
__btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline]
btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281
btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline]
btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412
btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline]
btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716
btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline]
btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105
btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info
---truncated--- |
