| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: fix validity interception issue when gisa is switched off
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).
The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.
To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.
The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.
kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4
000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70
#000003d93deb011e: af000000 mc 0,0
>000003d93deb0122: a728ffea lhi %r2,-22
000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e
000003d93deb012a: 9101f0b0 tm 176(%r15),1
000003d93deb012e: a774fe48 brc 7,000003d93deafdbe
000003d93deb0132: 40a0f0ae sth %r10,174(%r15)
Call Trace:
[<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
[<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
[<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
[<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
[<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
[<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
[<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
[<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
[<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink: Initialise extack before use in ACKs
Add missing extack initialisation when ACKing BATCH_BEGIN and BATCH_END. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - Ensure payload is zero when using key slot
We could leak stack memory through the payload field when running
AES with a key from one of the hardware's key slots. Fix this by
ensuring the payload field is set to 0 in such cases.
This does not affect the common use case when the key is supplied
from main memory via the descriptor payload. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Init the count variable in collecting hot-reset devices
The count variable is used without initialization, it results in mistakes
in the device counting and crashes the userspace if the get hot reset info
path is triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't attempt to schedule hpd_work on headless cards
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set. |
| In the Linux kernel, the following vulnerability has been resolved:
do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak
syzbot identified a kernel information leak vulnerability in
do_sys_name_to_handle() and issued the following report [1].
[1]
"BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x100 lib/usercopy.c:40
instrument_copy_to_user include/linux/instrumented.h:114 [inline]
_copy_to_user+0xbc/0x100 lib/usercopy.c:40
copy_to_user include/linux/uaccess.h:191 [inline]
do_sys_name_to_handle fs/fhandle.c:73 [inline]
__do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
__se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94
__x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94
...
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
__kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc+0x121/0x3c0 mm/slab_common.c:1020
kmalloc include/linux/slab.h:604 [inline]
do_sys_name_to_handle fs/fhandle.c:39 [inline]
__do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
__se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94
__x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94
...
Bytes 18-19 of 20 are uninitialized
Memory access of size 20 starts at ffff888128a46380
Data copied to user address 0000000020000240"
Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to
solve the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
hsr: Fix uninit-value access in hsr_get_node()
KMSAN reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
fill_frame_info net/hsr/hsr_forward.c:577 [inline]
hsr_forward_skb+0xe12/0x30e0 net/hsr/hsr_forward.c:615
hsr_dev_xmit+0x1a1/0x270 net/hsr/hsr_device.c:223
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
packet_alloc_skb net/packet/af_packet.c:2936 [inline]
packet_snd net/packet/af_packet.c:3030 [inline]
packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 1 PID: 5033 Comm: syz-executor334 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================
If the packet type ID field in the Ethernet header is either ETH_P_PRP or
ETH_P_HSR, but it is not followed by an HSR tag, hsr_get_skb_sequence_nr()
reads an invalid value as a sequence number. This causes the above issue.
This patch fixes the issue by returning NULL if the Ethernet header is not
followed by an HSR tag. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: add nla be16/32 types to minlen array
BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
nla_validate_range_unsigned lib/nlattr.c:222 [inline]
nla_validate_int_range lib/nlattr.c:336 [inline]
validate_nla lib/nlattr.c:575 [inline]
...
The message in question matches this policy:
[NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255),
but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.
Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-qdma: init irq after reg initialization
Initialize the qDMA irqs after the registers are configured so that
interrupts that may have been pending from a primary kernel don't get
processed by the irq handler before it is ready to and cause panic with
the following trace:
Call trace:
fsl_qdma_queue_handler+0xf8/0x3e8
__handle_irq_event_percpu+0x78/0x2b0
handle_irq_event_percpu+0x1c/0x68
handle_irq_event+0x44/0x78
handle_fasteoi_irq+0xc8/0x178
generic_handle_irq+0x24/0x38
__handle_domain_irq+0x90/0x100
gic_handle_irq+0x5c/0xb8
el1_irq+0xb8/0x180
_raw_spin_unlock_irqrestore+0x14/0x40
__setup_irq+0x4bc/0x798
request_threaded_irq+0xd8/0x190
devm_request_threaded_irq+0x74/0xe8
fsl_qdma_probe+0x4d4/0xca8
platform_drv_probe+0x50/0xa0
really_probe+0xe0/0x3f8
driver_probe_device+0x64/0x130
device_driver_attach+0x6c/0x78
__driver_attach+0xbc/0x158
bus_for_each_dev+0x5c/0x98
driver_attach+0x20/0x28
bus_add_driver+0x158/0x220
driver_register+0x60/0x110
__platform_driver_register+0x44/0x50
fsl_qdma_driver_init+0x18/0x20
do_one_initcall+0x48/0x258
kernel_init_freeable+0x1a4/0x23c
kernel_init+0x10/0xf8
ret_from_fork+0x10/0x18 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad4130: zero-initialize clock init data
The clk_init_data struct does not have all its members
initialized, causing issues when trying to expose the internal
clock on the CLK pin.
Fix this by zero-initializing the clk_init_data struct. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: always initialize struct msghdr completely
syzbot complains that msg->msg_get_inq value can be uninitialized [1]
struct msghdr got many new fields recently, we should always make
sure their values is zero by default.
[1]
BUG: KMSAN: uninit-value in tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571
tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571
inet_recvmsg+0x131/0x580 net/ipv4/af_inet.c:879
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg+0x12b/0x1e0 net/socket.c:1066
__sock_xmit+0x236/0x5c0 drivers/block/nbd.c:538
nbd_read_reply drivers/block/nbd.c:732 [inline]
recv_work+0x262/0x3100 drivers/block/nbd.c:863
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2700
worker_thread+0xf45/0x1490 kernel/workqueue.c:2781
kthread+0x3ed/0x540 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
Local variable msg created at:
__sock_xmit+0x4c/0x5c0 drivers/block/nbd.c:513
nbd_read_reply drivers/block/nbd.c:732 [inline]
recv_work+0x262/0x3100 drivers/block/nbd.c:863
CPU: 1 PID: 7465 Comm: kworker/u5:1 Not tainted 6.7.0-rc7-syzkaller-00041-gf016f7547aee #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: nbd5-recv recv_work |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Initialize mailbox message for VF reset
When a MAC address is not assigned to the VF, that portion of the message
sent to the VF is not set. The memory, however, is allocated from the
stack meaning that information may be leaked to the VM. Initialize the
message buffer to 0 so that no information is passed to the VM in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix kernel-infoleak for SCTP sockets
syzbot reported a kernel infoleak [1] of 4 bytes.
After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()
Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:154 [inline]
_copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
copy_to_iter include/linux/uio.h:162 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x795/0xa10 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:737 [inline]
slab_alloc_node mm/slub.c:3247 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1158 [inline]
netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
__netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1061
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0
CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING
syzbot reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
strlen lib/string.c:418 [inline]
strstr+0xb8/0x2f0 lib/string.c:756
tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
TIPC bearer-related names including link names must be null-terminated
strings. If a link name which is not null-terminated is passed through
netlink, strstr() and similar functions can cause buffer overrun. This
causes the above issue.
This patch changes the nla_policy for bearer-related names from NLA_STRING
to NLA_NUL_STRING. This resolves the issue by ensuring that only
null-terminated strings are accepted as bearer-related names.
syzbot reported similar uninit-value issue related to bearer names [2]. The
root cause of this issue is that a non-null-terminated bearer name was
passed. This patch also resolved this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
KMSAN reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Uninit was stored to memory at:
virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline]
virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Uninit was created at:
slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x2fd/0x770 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline]
virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58
virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline]
virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: vsock-loopback vsock_loopback_work
=====================================================
The following simple reproducer can cause the issue described above:
int main(void)
{
int sock;
struct sockaddr_vm addr = {
.svm_family = AF_VSOCK,
.svm_cid = VMADDR_CID_ANY,
.svm_port = 1234,
};
sock = socket(AF_VSOCK, SOCK_STREAM, 0);
connect(sock, (struct sockaddr *)&addr, sizeof(addr));
return 0;
}
This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the
`struct virtio_vsock_hdr` are not initialized when a new skb is allocated
in `virtio_transport_init_hdr()`. This patch resolves the issue by
initializing these fields during allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg
syzbot reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737
usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374
really_probe+0xf20/0x20b0 drivers/base/dd.c:529
driver_probe_device+0x293/0x390 drivers/base/dd.c:701
__device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
__device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032
usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241
usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272
really_probe+0xf20/0x20b0 drivers/base/dd.c:529
driver_probe_device+0x293/0x390 drivers/base/dd.c:701
__device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
__device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554
hub_port_connect drivers/usb/core/hub.c:5208 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5348 [inline]
port_event drivers/usb/core/hub.c:5494 [inline]
hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576
process_one_work+0x1688/0x2140 kernel/workqueue.c:2269
worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415
kthread+0x551/0x590 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
Local variable ----buf.i87@smsc75xx_bind created at:
__smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
__smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
This issue is caused because usbnet_read_cmd() reads less bytes than requested
(zero byte in the reproducer). In this case, 'buf' is not properly filled.
This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested. |
| In the Linux kernel, the following vulnerability has been resolved:
inet_diag: fix kernel-infoleak for UDP sockets
KMSAN reported a kernel-infoleak [1], that can exploited
by unpriv users.
After analysis it turned out UDP was not initializing
r->idiag_expires. Other users of inet_sk_diag_fill()
might make the same mistake in the future, so fix this
in inet_sk_diag_fill().
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:156 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:156 [inline]
_copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
copy_to_iter include/linux/uio.h:155 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2cb/0x1280 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3657 [inline]
netlink_recvmsg+0x660/0x1c60 net/netlink/af_netlink.c:1974
sock_recvmsg_nosec net/socket.c:944 [inline]
sock_recvmsg net/socket.c:962 [inline]
sock_read_iter+0x5a9/0x630 net/socket.c:1035
call_read_iter include/linux/fs.h:2156 [inline]
new_sync_read fs/read_write.c:400 [inline]
vfs_read+0x1631/0x1980 fs/read_write.c:481
ksys_read+0x28c/0x520 fs/read_write.c:619
__do_sys_read fs/read_write.c:629 [inline]
__se_sys_read fs/read_write.c:627 [inline]
__x64_sys_read+0xdb/0x120 fs/read_write.c:627
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
netlink_dump+0x3d5/0x16a0 net/netlink/af_netlink.c:2245
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1343
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:276
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x63f/0xe30 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 312 are uninitialized
Memory access of size 312 starts at ffff88812ab54000
Data copied to user address 0000000020001440
CPU: 1 PID: 6365 Comm: syz-executor801 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 |
| In the Linux kernel, the following vulnerability has been resolved:
media: mxl111sf: change mutex_init() location
Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.
Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:
dvb_usbv2_init()
dvb_usbv2_adapter_init()
dvb_usbv2_adapter_frontend_init()
props->frontend_attach()
props->init()
Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim: avoid putting an uninitialized iova_domain
The system will crash if we put an uninitialized iova_domain, this
could happen when an error occurs before initializing the iova_domain
in vdpasim_create().
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0
...
Call Trace:
<TASK>
put_iova_domain+0x29/0x220
vdpasim_free+0xd1/0x120 [vdpa_sim]
vdpa_release_dev+0x21/0x40 [vdpa]
device_release+0x33/0x90
kobject_release+0x63/0x160
vdpasim_create+0x127/0x2a0 [vdpa_sim]
vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net]
vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa]
genl_family_rcv_msg_doit+0x112/0x140
genl_rcv_msg+0xdf/0x1d0
...
So we must make sure the iova_domain is already initialized before
put it.
In addition, we may get the following warning in this case:
WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70
So we must make sure the iova_cache_put() is invoked only if the
iova_cache_get() is already invoked. Let's fix it together. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind()
syzbot reported access to unitialized memory in mbind() [1]
Issue came with commit bda420b98505 ("numa balancing: migrate on fault
among multiple bound nodes")
This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid
combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in
do_set_mempolicy()
This patch moves the check in sanitize_mpol_flags() so that it is also
used by mbind()
[1]
BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
__mpol_equal+0x567/0x590 mm/mempolicy.c:2260
mpol_equal include/linux/mempolicy.h:105 [inline]
vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_alloc_node mm/slub.c:3221 [inline]
slab_alloc mm/slub.c:3230 [inline]
kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235
mpol_new mm/mempolicy.c:293 [inline]
do_mbind+0x912/0x15f0 mm/mempolicy.c:1289
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
=====================================================
Kernel panic - not syncing: panic_on_kmsan set ...
CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106
dump_stack+0x25/0x28 lib/dump_stack.c:113
panic+0x44f/0xdeb kernel/panic.c:232
kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186
__msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208
__mpol_equal+0x567/0x590 mm/mempolicy.c:2260
mpol_equal include/linux/mempolicy.h:105 [inline]
vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae |
