| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Axios is a promise based HTTP client for the browser and Node.js. From 0.19.0 to before 0.31.1 and 1.15.2, Axios contains prototype-pollution gadgets in request config processing. If another vulnerability in the same JavaScript process has already polluted Object.prototype.transformResponse, affected Axios versions may treat that inherited value as request configuration or as an option validator. Axios does not itself create the prototype pollution. Exploitability requires a separate prototype-pollution vulnerability or equivalent attacker control over Object.prototype before Axios creates a request. This vulnerability is fixed in 0.31.1 and 1.15.2. |
| Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.16.0, the Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into a full Man-in-the-Middle (MITM) attack — intercepting, reading, and modifying all HTTP traffic including authentication credentials. The HTTP adapter at lib/adapters/http.js:670 reads config.proxy via standard property access, which traverses the prototype chain. Because proxy is not present in Axios defaults, the merged config object has no own proxy property, making it trivially injectable via prototype pollution. Once injected, setProxy() routes all HTTP requests through the attacker's proxy server. This vulnerability is fixed in 1.16.0. |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios does not normalise IPv4-mapped IPv6 addresses. When NO_PROXY lists an IPv4 address such as 127.0.0.1 or 169.254.169.254, a request URL using the IPv4-mapped IPv6 form (::ffff:7f00:1, ::ffff:a9fe:a9fe) still routes through the configured proxy. Node.js resolves these addresses to the underlying IPv4 host, so the request reaches the internal service via the proxy rather than being blocked. This vulnerability is fixed in 0.32.0 and 1.16.0. |
| Axios is a promise based HTTP client for the browser and Node.js. Axios versions 1.7.0 through 1.15.x did not enforce configured request and response size limits when requests were sent with the fetch adapter. Applications that selected adapter: 'fetch', or ran in environments where axios resolved to the fetch adapter, could receive or send bodies larger than maxContentLength or maxBodyLength despite those limits being explicitly configured. This can cause resource exhaustion in server-side usage when a malicious or compromised server returns an oversized response, when an attacker can supply a large data: URL, or when an application forwards attacker-controlled request bodies through axios while relying on maxBodyLength as a boundary. This vulnerability is fixed in 0.32.0 and 1.16.0. |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios’s Node.js HTTP adapter may forward a Proxy-Authorization header to a redirected origin during specific proxy-to-direct redirect flows. This affects Node.js usage, where an initial HTTP request is sent through an authenticated HTTP proxy, redirects are followed, and the redirected URL is no longer proxied. Under affected redirect shapes, the final origin can receive the proxy credential that was intended only for the outbound proxy. This vulnerability is fixed in 0.32.0 and 1.16.0. |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios’ Node.js HTTP adapter can leak proxy credentials to a redirect target in affected versions. When a request is sent through an authenticated proxy, Axios may add a Proxy-Authorization header. If Axios then follows a redirect and the redirected request is no longer sent through that proxy, the stale Proxy-Authorization header can remain on the redirected request and be sent to the redirect target. This affects Node.js's use of Axios with automatic redirects enabled and an authenticated proxy configuration. Browser adapters are not affected. This vulnerability is fixed in 0.32.0 and 1.16.0. |
| Netty is a network application framework for development of protocol servers and clients. In netty-handler prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can bypass IPv6 subnet rules due to an incorrect masking operation in IpSubnetFilterRule.compareTo(). Valid public IP addresses can bypass the restrictions. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, the MQTT 5 header Properties section is parsed and buffered before any message size limit is applied. Specifically, in MqttDecoder, the decodeVariableHeader() method is called before the bytesRemainingBeforeVariableHeader > maxBytesInMessage check. The decodeVariableHeader() can call other methods which will call decodeProperties(). Effectively, Netty does not apply any limits to the size of the properties being decoded. Additionally, because MqttDecoder extends ReplayingDecoder, Netty will repeatedly re-parse the enormous Properties sections and buffer the bytes in memory, until the entire thing parses to completion. This can cause high resource usage in both CPU and memory. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. |
| Full details and mitigation steps are currently restricted and will be published at a later date. |
| Full details and mitigation steps are currently restricted and will be published at a later date. |
| Full details and mitigation steps are currently restricted and will be published at a later date. |
| Full details and mitigation steps are currently restricted and will be published at a later date. |
| Full details and mitigation steps are currently restricted and will be published at a later date. |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.1.1, Address6.group() and Address6.link() do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and AddressError.parseMessage (emitted by the Address6 constructor for invalid input) can contain unescaped attacker-controlled content in one branch. An application that (1) passes untrusted input to Address6 and (2) renders the output of these methods, or the thrown error's parseMessage, as HTML (e.g. via innerHTML) is vulnerable to cross-site scripting. This vulnerability is fixed in 10.1.1. |
| Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2. |
| pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11. |
| In Micrometer, it is possible for a user to provide specially crafted HTTP requests that may cause a denial-of-service (DoS) condition.
Affected versions:
micrometer-core 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18; 1.9.0 through 1.9.17.
micrometer-jetty11 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18.
micrometer-jetty12 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18. |
| In Micrometer, it is possible for a user to provide specially crafted gRPC requests that may cause a denial-of-service (DoS) condition.
Affected versions:
Micrometer 1.16.0 through 1.16.5; 1.15.0 through 1.15.11. |
| SSH servers which use CertChecker as a public key callback without setting IsUserAuthority or IsHostAuthority could be caused to panic by a client presenting a certificate. CertChecker now returns an error instead of panicking when these callbacks are nil. |
| When an SSH server authentication callback returned PartialSuccessError with non-nil Permissions, those permissions were silently discarded, potentially dropping certificate restrictions such as force-command after a second factor succeeded. Returning non-nil Permissions with PartialSuccessError now results in a connection error. |
