| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath
When cifs_sanitize_prepath is called with an empty string or a string
containing only delimiters (e.g., "/"), the current logic attempts to
check *(cursor2 - 1) before cursor2 has advanced. This results in an
out-of-bounds read.
This patch adds an early exit check after stripping prepended
delimiters. If no path content remains, the function returns NULL.
The bug was identified via manual audit and verified using a
standalone test case compiled with AddressSanitizer, which
triggered a SEGV on affected inputs. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: i740fb: fix potential memory leak in i740fb_probe()
In i740fb_probe(), the memory allocated in fb_videomode_to_modelist()
for modelist is not freed in the error paths. Fix that by calling
fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix misplaced inc of net->cells_outstanding
Fix net->cells_outstanding being incremented before the check for failure
of idr_alloc_cyclic(), leaving the count incremented on error. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: prevent connlimit drops for early confirmed ct
Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add
was skipped") introduced a regression where packets for valid
connections are dropped when using connlimit for soft-limiting
scenarios.
The issue occurs when a new connection reuses a socket currently in
the TIME_WAIT state. In this scenario, the connection tracking entry
is evaluated as already confirmed. Previously, __nf_conncount_add()
assumed that if a connection was confirmed and did not originate from
the loopback interface, it should skip the addition and return -EEXIST.
Skipping the addition triggers a garbage collection run that cleans up
the TIME_WAIT connection. Consequently, the active connection count
drops to 0, which xt_connlimit mishandles, leading to the false rejection
of the perfectly valid new connection.
Fix this by replacing the interface check with protocol-agnostic state
checks. We now skip the tree insertion and preserve the lockless garbage
collection optimization only if the connection is IPS_ASSURED. This
allows early-confirmed setup packets (such as reused TIME_WAIT sockets
or locally generated SYN-ACKs) to be properly evaluated and counted
without falsely dropping. The goto check_connections path is maintained
to ensure these setup packets are deduplicated correctly.
This has been tested with slowhttptest and HTTP server configured
locally to ensure we are not breaking soft-limiting scenarios for local
or external connections. In addition, it was tested with a OVS zone
limit too. |
| IBM Informix Dynamic Server 14.10, 15.0, and 12.10 could allow an unauthenticated user to execute arbitrary commands with service account privileges on the system due to improper validation of user supplied input. |
| Unsanitized user-supplied input in report filtering parameters is concatenated directly into SQL queries without proper escaping or parameterized queries, enabling blind SQL injection and unauthorized database read access. |
| A filename supplied during file upload is not properly sanitized before being used in system command execution, allowing an attacker to inject shell metacharacters and achieve command injection via the audit file upload functionality. |
| Unvalidated input in asset filter parameters allows shell metacharacters to escape command argument handling, resulting in remote code execution as a low-privileged OS user via the Analysis REST endpoint. |
| An authenticated non-admin user can exploit a SQL injection flaw in the ticketing REST API to access sensitive data stored in the appliance database. |
| The audit file upload handler does not sanitize filenames, allowing shell metacharacters to flow into system command execution. This input validation failure enables command injection when chained with a related vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject dinodes with non-canonical i_mode type
Patch series "ocfs2: harden inode validators against forged metadata", v2.
This series adds three structural checks to OCFS2 dinode validation so
malformed on-disk fields are rejected before ocfs2_populate_inode() copies
them into the in-core inode.
The checks cover:
- i_mode values whose type bits do not name a canonical POSIX file
type;
- non-device dinodes whose id1.dev1.i_rdev field is non-zero; and
- non-inline dinodes that claim non-zero i_size while i_clusters is
zero, covering directories unconditionally and regular files on
non-sparse volumes.
The normal read path reports these through ocfs2_error(), matching the
existing suballoc-slot, inline-data, chain-list, and refcount checks. The
online filecheck path uses the same structural predicates but keeps its
own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead
of calling ocfs2_error().
This patch (of 3):
ocfs2_validate_inode_block() currently accepts any non-zero i_mode value.
ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode
and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file
iops; an unrecognised type falls through to ocfs2_special_file_iops and
init_special_inode().
Reject dinodes whose type bits do not name one of the seven canonical
POSIX file types. Use fs_umode_to_ftype(), the same generic file-type
conversion helper OCFS2 already uses for directory entries, so the
accepted inode type set matches the kernel file-type vocabulary instead of
open-coding a local switch.
Apply the same structural check to the online filecheck read path.
filecheck keeps its own error namespace, so it reports malformed i_mode
through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of
calling ocfs2_error(), but it must not allow a malformed dinode to proceed
into ocfs2_populate_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: pl353: fix probe resource allocation
During probe(), the devm_ioremap() is called with the parent device
instead of the current one. So when the module is unloaded, the register
area isn't released.
Target the pl35x device in the devm_ioremap() instead of its parent. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tridentfb: fix potential memory leak in trident_pci_probe()
In trident_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same
persistent_id race the fp->owner.name compare-read in
ksmbd_vfs_compare_durable_owner() against the kfree() in
ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a
standalone kstrdup() buffer whose lifetime is independent of the fp
refcount, and the two sites share no lock: the compare reads the buffer
while the reopen frees it, so the strcmp() can dereference freed memory.
Commit 7ce4fc40018d ("ksmbd: fix durable reconnect double-bind race in
ksmbd_reopen_durable_fd") made the fp->conn claim atomic under
global_ft.lock (closing the owner.name double-free and the ksmbd_file
write-UAF), but the compare-read versus reopen-free pair was left
unserialized.
BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80
Read of size 1 by task kworker
strcmp
ksmbd_vfs_compare_durable_owner
smb2_check_durable_oplock
smb2_open
Freed by task kworker:
kfree
ksmbd_reopen_durable_fd
smb2_open
Allocated by task kworker:
kstrdup
session_fd_check
smb2_session_logoff
The buggy address belongs to the cache kmalloc-8
Serialize both sides of the race with fp->f_lock. The global durable
file-table lock still protects the durable reconnect claim, but
fp->owner.name is per-open state and does not need to block unrelated
durable table lookups or reconnects. The teardown is left at its
existing location after the reopen-success point so that an __open_id()
rollback still retains owner.name for a later legitimate reconnect to
verify. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: reconfigure for PIO when DMA cannot be started
When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA:
spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and
spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the
SDMA watermarks.
If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single()
returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and
falls back to PIO. The dynamic-burst DMA path uses its own bounce
buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped
are not set and the core's DMA->PIO retry is skipped; the driver falls
back to PIO internally. But none of the DMA-mode configuration is
undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst
length and dynamic_burst cleared, and the transferred data is corrupted.
This is easily hit on i.MX8MP boards that describe ECSPI DMA in the
device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin):
every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then
returns shifted TPM2_GetCapability data, is flagged "field failure
mode", /dev/tpmrm0 is never created.
Set controller->fallback before re-running spi_imx_setupxfer() so the
ECSPI is reconfigured exactly like a normal PIO transfer. With
controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma()
return false, so it clears spi_imx->usedma and reprograms the controller
(clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No
explicit spi_imx->usedma = false is needed: setupxfer() already updates
it from the can_dma() result. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: fix refcount leak in is_full_charged()
In is_full_charged(), power_supply_get_by_name() is called to
obtain a reference to the fuel_gauge power supply. If the
voltage check (uV >= desc->fullbatt_uV) succeeds, the function
returns true directly without releasing the reference, leaking
the refcount.
Fix this by setting a flag and jumping to the out label where
power_supply_put() properly drops the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: fix potential memory leak in uvesafb_probe()
Due to an incorrect goto label, memory allocated for modedb and modelist
in uvesafb_vbe_init() is not freed in some error paths. Fix this by
updating the goto label. |
