| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in open-iscsi's iscsiuio component. This vulnerability involves an integer underflow and out-of-bounds read during Dynamic Host Configuration Protocol for IPv6 (DHCPv6) packet parsing. Specifically, crafted DHCPv6 Advertise traffic with a short User Datagram Protocol (UDP) length can cause the DHCPv6 payload length to underflow. An unauthenticated attacker on an adjacent network segment can exploit this by sending specially crafted IPv6 UDP traffic while the client is in an active DHCPv6 exchange, leading to a denial of service due to a process crash or service disruption. |
| The Versa Concerto SD-WAN orchestration platform is vulnerable to an privileges escalation and container escape vulnerability caused by unsafe default mounting of host binary paths that allow the container to modify host paths. The escape can be used to trigger remote code execution or direct host access depending on the host operating system configuration.This issue is known to affect Concerto from 12.1.2 through 12.2.0. Additional versions may be vulnerable. |
| The Versa Concerto SD-WAN orchestration platform is vulnerable to an authentication bypass in the Traefik reverse proxy configuration, allowing at attacker to access administrative endpoints. The Spack upload endpoint can be leveraged for a Time-of-Check to Time-of-Use (TOCTOU) write in combination with a race condition to achieve remote code execution via path loading manipulation, allowing an unauthenticated actor to achieve remote code execution (RCE).This issue is known to affect Concerto from 12.1.2 through 12.2.0. Additional versions may be vulnerable. |
| A flaw was found in FreeIPA. The trust-fetch-domains command is gated by a read-only permission on the trust object rather than a trust-administration permission, allowing an authenticated, non-privileged IPA user to trigger a privileged Active Directory trust refresh using an attacker-supplied server and credentials, resulting in unauthorized, attacker-controlled modification of trusted-domain and ID-range identity data in the IPA LDAP directory. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the ASMI web interface. An unauthenticated attacker with network access can send the FSP a malformed request, allowing arbitrary code execution, giving the attacker full control over the managed system, resulting in a confidentiality, integrity, and availability impact. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "thermal/drivers/hwmon: Cleanup coding style a bit"
Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style
a bit") that introduced a use-after-free into the error path of
thermal_add_hwmon_sysfs() by removing a valid check from it. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: read le->link under the node lock in tipc_node_link_down()
tipc_node_link_down() caches the link pointer before taking n->lock:
struct tipc_link *l = le->link; /* unlocked */
if (!l)
return;
tipc_node_write_lock(n);
if (!tipc_link_is_establishing(l)) { /* deref l */
...
tipc_link_reset(l); /* write into l */
if (delete) {
kfree(l);
le->link = NULL;
The delete=true caller frees that very object under n->lock, so the lock
does not protect the cached pointer against it:
- CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link
supervision timer via tipc_node_timeout(), reads l unlocked and then
dereferences it under n->lock;
- CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable()
-> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true)
-> kfree(l).
The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers
disable_media() only schedules the asynchronous cleanup_bearer() work, so
its synchronize_net() runs after the links are already gone. An in-flight
CPU A that has read l therefore dereferences freed memory once B frees it:
a use-after-free read in tipc_link_is_establishing(), and a use-after-free
write via tipc_link_reset() on the establishing branch.
The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6:
BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285)
Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0
tipc_link_is_establishing (net/tipc/link.c:285)
tipc_node_link_down (net/tipc/node.c:1076)
tipc_node_timeout (net/tipc/node.c:843)
Allocated by task 9549:
tipc_link_create (net/tipc/link.c:490)
tipc_node_check_dest (net/tipc/node.c:1279)
tipc_disc_rcv (net/tipc/discover.c:252)
tipc_udp_recv (net/tipc/udp_media.c:389)
Freed by task 9549:
tipc_node_link_down (net/tipc/node.c:1084)
tipc_node_delete_links (net/tipc/node.c:1320)
bearer_disable (net/tipc/bearer.c:414)
__tipc_nl_bearer_disable (net/tipc/bearer.c:992)
Move the le->link read inside tipc_node_write_lock(), so it is serialised
against the kfree() in the delete path. A racing teardown now either has
not run yet, and we see a valid link, or has already run, and we see NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: don't leave a full plaintext sk_msg ring unpushed
When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills
the plaintext sk_msg ring, it does not set full_record, so the record is
left full and unpushed. A later splice() then adds to an already full
ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps
onto sg.start and the ring appears empty. Fragments added after that
overwrite live entries, and sg.size no longer matches what is reachable
between sg.start and sg.end, so pushing the record runs the scatterwalk off
the end of the scatterlist.
An unprivileged user can trigger this on a loopback TCP socket with the
"tls" ULP attached:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0
Call Trace:
skcipher_walk_next+0x1d1/0x2c0
gcm_encrypt_aesni_avx+0x1e9/0x220
bpf_exec_tx_verdict+0x3bb/0x860
tls_sw_sendmsg+0xa1a/0xca0
__sys_sendto+0x1da/0x1f0
Set full_record in the copy path when the ring becomes full, and push a
record that is already full on entry to the sendmsg loop. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: read virtqueues under worker locks
Commit bd50c5dc182b ("vsock/virtio: add support for device
suspend/resume") made the *_run flags transition from false to true when
restore installs replacement virtqueues. The RX, TX and event workers
read their virtqueue before locking and checking the corresponding flag,
so a worker delayed across freeze and restore can observe the replacement
queue's running state while retaining a pointer to the deleted queue.
Read each virtqueue under its mutex after checking the run flag, keeping
the pointer and state in the same queue generation. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: initialise dibs->lock in dibs_dev_alloc()
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't warn when the mount is completed from another user namespace
fsopen() records the caller's user namespace in fc->user_ns and hands
back an ordinary file descriptor. Nothing ties the task that calls
fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The
fd is inherited across fork() and exec() and it can be passed over a
unix socket.
Completing a context from another user namespace is allowed on purpose.
vfs_cmd_create() authorizes the create with mount_capable(), which for
FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that
succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns.
So an unprivileged task can reach the WARN_ON() in bm_fill_super():
create a user and a mount namespace in a child, call
fsopen("binfmt_misc") there, send the fscontext fd to the parent and let
the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain
unshare(1) and no capability is needed anywhere:
WARNING: fs/binfmt_misc.c:938 at bm_fill_super+0xa2/0xc0 [binfmt_misc]
CPU: 15 UID: 1000 PID: 3243382 Comm: fswarn
Call Trace:
get_tree_keyed+0x7d/0xb0
bm_get_tree+0x34/0x90 [binfmt_misc]
vfs_get_tree+0x2a/0x100
vfs_cmd_create+0x60/0xf0
__do_sys_fsconfig+0x4b2/0x500
The child needs the mount namespace because fsopen() itself gates on
may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning
the caller's mount namespace. fsconfig() doesn't repeat that check.
It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be
raised in a loop to taint the kernel and flood the log, and it panics a
kernel booted with panic_on_warn.
Keep refusing the mount and stop warning about it. Nothing in
bm_fill_super() depends on the two namespaces matching, it derives
everything from sb->s_user_ns. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gact, act_police: range check the fallback control action
tcf_action_check_ctrlact() range checks the primary control action:
if (!opcode)
ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0;
TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it
cannot be set that way. But act_gact and act_police each carry a second,
independent control action supplied by user space that never reaches that
helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject
TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned
verbatim from the action.
In particular user space can store TC_ACT_CONSUMED, which is
TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value
range. That verdict tells every caller the action took ownership of the
skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for it. The result is
one leaked sk_buff plus its data buffer per packet traversing the filter,
unbounded, for all traffic on the chain including kernel-generated
packets.
Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so
with pval = 1 gact_determ() returns the fallback for every packet.
act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and
tcf_police_mtu_check() always passes.
TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor
reinsert action"), after both goto-chain guards were written:
commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on
fallback control action") and
commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on
fallback control action"). Neither guard was widened when the new
verdict appeared.
Factor the existing range test out of tcf_action_check_ctrlact() as
tcf_action_valid() and apply it to both fallbacks. The helper cannot call
tcf_action_check_ctrlact() directly because that also allocates a
goto_chain, which is exactly what these two sites must not do.
Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte
skbuff_head_cache object plus its 704-byte data buffer per packet. With
this patch both configurations are rejected with -EINVAL and kmemleak
reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atlantic: free RX pages of consumed but not refilled buffers
aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to
hardware. Since the page reuse strategy was added, a cleaned RX buffer
keeps its page (and its DMA mapping) in the ring for reuse, and refill
is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES
slots are free. Slots that were consumed but not yet reposted therefore
sit in the complementary [sw_tail, sw_head) gap with a live page, and
the deinit walk never visits them: up to a refill batch worth of pages
and DMA mappings leak on every interface down.
Walk the whole ring instead and release whatever is still there. Also
bail out if the buffer ring is already gone: a partial
aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so
aq_ptp_ring_deinit() still gets here on the unwind path. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_netdev: Preserve RX queue depth on allocation failure
ntb_netdev_rx_handler() hands the received skb to the network stack
before allocating its replacement. If the allocation fails, nothing is
reposted. Every failure therefore takes one buffer out of the RX queue
while the interface remains up, and enough failures eventually stall
reception.
A retry path could refill the queue later, but ntb_netdev has none.
Allocate the replacement first instead. If that fails, drop the packet
and repost the same skb. This keeps the queue full and lets packet
delivery resume as soon as memory is available again. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race between update_event_fields and, event_define_fields
The following sequence may leads race between event_define_fields()
and update_event_fields():
CPU0 (loads module A) CPU1 (loads module B)
=============================== ===============================
load_module(A) load_module(B)
notifier_call_chain notifier_call_chain
trace_module_notify trace_module_notify
mutex_lock(&event_mutex) trace_event_update_all()
trace_module_add_events(A) down_write(&trace_event_sem)
__register_event(call_A)
__add_event_to_tracers(call_A)
event_define_fields(call_A)
for each f: list_for_each_entry(field,
list_add(&f->link, &class->fields, link)
&class->fields) field = class->fields->next;
Where access to the class->fields is not protected by the event_mutex in
trace_event_update_all().
This produces the following panic:
Unable to handle kernel access ... at virtual address 0000000000000018
pc : update_event_fields+0xf8/0x368
Call trace:
update_event_fields+0xf8/0x368
trace_event_update_all+0x7c/0x2b4
trace_module_notify+0x4c/0x1dc
notifier_call_chain+0x84/0x168
blocking_notifier_call_chain_robust+0x64/0xd4
load_module+0x10c8/0x123c
__arm64_sys_finit_module+0x230/0x31c
Fix by taking event_mutex in trace_event_update_all() before
trace_event_sem. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: Fix UAF at delayed release of MIDI2 EPs
The recent fix for UAF in ump_to_endpoint() caused another UAF because
it tries to dereference the UMP endpoint object, but this might be
executed at a delayed context where the endpoint has been already
released.
Add private_free to clear the associated data for avoiding the further
dereference for delayed releases. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length
ncsi_send_cmd_nl() takes the number of bytes to copy from the
attacker-controlled ncsi_pkt_hdr.length field of the in-band packet
header, while the source buffer is the NCSI_ATTR_DATA netlink
attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr).
The two length sources are never cross-checked: only
nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced.
With hdr->length set larger than the attribute payload (up to 65535
against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies
past the end of the netlink attribute buffer with unsafe_memcpy(),
leaking up to ~64KB of kernel heap memory into the transmitted NCSI
command packet. The destination skb is sized by the declared payload,
so the write side does not overflow - this is a pure OOB read /
information leak, reachable with CAP_NET_ADMIN on systems with a
registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where
NET_NCSI=y is standard).
Reject commands whose declared payload extends past the end of the
data attribute.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix memory leak in exec_queue_set_hang_replay_state()
The q->replay_state is blindly overwritten, which can potentially leak
memory that was previously allocated by vmemdup_user().
Return an error if q->replay_state is not empty.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
(cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_cake: drop WARN_ON(1) for malformed packets in ACK filter
The sch_cake ACK filter parses packets to find the TCP header and filter
duplicated ACKs if the flow is backlogged. The parsing code contains a
WARN_ON(1) which can be triggered by a malformed IP header in certain
cases. Depending on the system configuration, this leads either to
either spamming dmesg with warnings, or a panic if panic_on_warn is set.
The code already correctly skips the offending packet in the branch that
triggers the warning, so the WARN_ON itself doesn't really serve any
purpose. So just drop it altogether to avoid the inconvenient side
effects. |
| The Versa Director offers REST APIs for orchestration and management. By design, certain APIs, such as the login screen, banner display, and device registration, do not require authentication. However, it was discovered that for Directors directly connected to the Internet, one of these APIs can be exploited by injecting invalid arguments into a GET request, potentially exposing the authentication tokens of other currently logged-in users. These tokens can then be used to invoke additional APIs on port 9183. This exploit does not disclose any username or password information.
Currently, there are no workarounds in Versa Director. However, if there is Web Application Firewall (WAF) or API Gateway fronting the Versa Director, it can be used to block access to the URLs of vulnerable API. /vnms/devicereg/device/* (on ports 9182 & 9183) and /versa/vnms/devicereg/device/* (on port 443). Versa recommends that Directors be upgraded to one of the remediated software versions. This vulnerability is not exploitable on Versa Directors not exposed to the Internet.We have validated that no Versa-hosted head ends have been affected by this vulnerability. Please contact Versa Technical Support or Versa account team for any further assistance. |
