| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE
conn->preauth_info is shared connection state (struct
preauth_integrity_info, kmalloc-96) that is allocated and freed by the
SMB2 NEGOTIATE handler and read by the response send path.
smb2_handle_negotiate() allocates conn->preauth_info, and on a
deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the
allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the
connection srv_mutex), which is held across the whole handler body.
The response send path smb3_preauth_hash_rsp(), called from the send:
block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences
conn->preauth_info->Preauth_HashValue (via
ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a
client drives two SMB2 NEGOTIATE requests on the same connection, one
worker can free conn->preauth_info on the failing-negotiate path while a
concurrent send-path worker is reading it, producing a slab
use-after-free read (KASAN-confirmed).
The send-path read tested conn->preauth_info for NULL but raced with the
free that occurs between the NULL check and the dereference, so the NULL
guard alone does not close the window.
Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under
ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock.
Because the negotiate handler holds conn_lock across its kfree + NULL
assignment, a reader that also takes conn_lock either runs fully before
the allocation or fully after the NULL store, and can never observe the
freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash()
takes no locks itself (it only computes a SHA-512 over the buffer), so
no lock-ordering inversion is introduced, and conn_lock is a sleepable
mutex which is safe on this send path (it already performs network I/O). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types
Sashiko pointed out that there are a few lockless RCU readers
using test_bit() which is a relaxed atomic operation and
provides no memory barrier guarantees. Use test_bit_acquire()
instead where the operation may run parallel with add/del/gc,
i.e. is not one from the next cases
- protected by region lock
- in a set destroy phase
- in a new/temporary set creation phase |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix zerocopy completion for multi-skb sends
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit
1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate SID in parent security descriptor during ACL inheritance
Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID
and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved
from the parent directory. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in proc_show_files()
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in compare_guid_key()
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: resample the data fork mapping after cycling ILOCK
xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode,
a data fork mapping, and a cow fork mapping. Unfortunately, these two
helpers cycle the ILOCK to grab a transaction, which means that the
mappings are stale as soon as we reacquire the ILOCK. Currently we
refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but
we don't refresh the data fork mapping beforehand, which means that the
xfs_bmap_trim_cow in that function queries the refcount btree about the
wrong physical blocks and returns an inaccurate value in *shared.
If *shared is now false, the directio write proceeds with a stale data
fork mapping. Fix this by querying the data fork mapping if the
sequence counter changes across the ILOCK cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: fix NULL pointer dereference for a console without vc_data
fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.
Keep fb_display[i].mode set only while the console has a vc_data. Check
vc_data before setting the mode in fbcon_set_disp(), and clear the mode in
fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips
such consoles. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: not change 0-byte $DATA attribute to non-resident
When ntfs_resident_attr_resize() cannot grow a resident attribute in
place, it retries after converting other resident attributes to
non-resident to free space in the MFT recrord.
Do not select zero-length resident $DATA attributes for this conversion.
fsck treats 0-byte non-resident $DATA attribute as corruptions. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index entries on reading
Validate index entries immediately after reading an index root or index
block from disk. This eliminates repeated checks in lookup and readdir,
and reduce the risk of missing checks in those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed
Creating a child cpuset where cpuset.mems is never set leads to a div/0
when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a
CPU hotplug event.
Reproduction steps:
1) Create a cgroup w/ cpuset controls (do not set cpuset.mems)
2) Move the task into the child cpuset
3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES
4) unplug and hotplug a cpu
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online
5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the
call to __nodes_fold()
The cpuset code passes (cs->mems_allowed) which is not guaranteed to have
nodes to the rebind routine. Use cs->effective_mems instead, which is
guaranteed to have a non-empty nodemask once we reach that code path.
[ david: add a comment, slightly rephrase description ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: fix BAR resource leak on PF number failure
If cn23xx_get_pf_num() fails, the function returns without
unmapping either BAR. Unmap both BARs before returning from
the error path.
Found by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for FSCTL mutations
SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB
handle but call VFS xattr, fallocate or fileattr helpers with the current
ksmbd worker credentials. Those helpers can revalidate inode permissions,
ownership and LSM policy independently of the SMB handle access mask.
Run each operation with the credentials captured in the target file when
the handle was opened. Keep credential handling local to these single-file
FSCTLs rather than applying session credentials to the complete IOCTL
handler, which also contains handle-less and multi-handle operations. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix memory leak in ieee80211_register_hw()
If kmemdup() fails while copying supported band structures, the error
path jumps to fail_rate. This skips rate_control_deinitialize() and
leaks the initialized local->rate_ctrl.
Fix this by adding a fail_band label that shares the rate-control cleanup
path before falling through to the remaining teardown.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable mac80211 device/driver combination to test with, no runtime
testing was able to be performed. |
