| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigExceptAli. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/ConfigExceptMSN. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/ConfigExceptQQ. Executing a manipulation can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formWebAuthGlobalConfig. Performing a manipulation results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Buffer overflow vulnerability exists in Defense Platform Home Edition Ver.3.9.51.x and earlier. If an attacker performs a specific operation, SYSTEM privilege of the Windows system where the product is running may be obtained. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.
Found by a modified version of syzkaller.
UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
? lock_chain_count+0x20/0x20
brcmf_fw_alloc_request.cold+0x19/0x3ea
? brcmf_fw_get_firmwares+0x250/0x250
? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
brcmf_usb_get_fwname+0x114/0x1a0
? brcmf_usb_reset_resume+0x120/0x120
? number+0x6c4/0x9a0
brcmf_c_process_clm_blob+0x168/0x590
? put_dec+0x90/0x90
? enable_ptr_key_workfn+0x20/0x20
? brcmf_common_pd_remove+0x50/0x50
? rcu_read_lock_sched_held+0xa1/0xd0
brcmf_c_preinit_dcmds+0x673/0xc40
? brcmf_c_set_joinpref_default+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lock_acquire+0x19d/0x4e0
? find_held_lock+0x2d/0x110
? brcmf_usb_deq+0x1cc/0x260
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x1c/0x120
? brcmf_usb_deq+0x1a7/0x260
? brcmf_usb_rx_fill_all+0x5a/0xf0
brcmf_attach+0x246/0xd40
? wiphy_new_nm+0x1476/0x1d50
? kmemdup+0x30/0x40
brcmf_usb_probe+0x12de/0x1690
? brcmf_usbdev_qinit.constprop.0+0x470/0x470
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
? usb_match_id.part.0+0x88/0xc0
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __mutex_unlock_slowpath+0xe7/0x660
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_set_configuration+0x984/0x1770
? kernfs_create_link+0x175/0x230
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_new_device.cold+0x463/0xf66
? hub_disconnect+0x400/0x400
? _raw_spin_unlock_irq+0x24/0x30
hub_event+0x10d5/0x3330
? hub_port_debounce+0x280/0x280
? __lock_acquire+0x1671/0x5790
? wq_calc_node_cpumask+0x170/0x2a0
? lock_release+0x640/0x640
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x873/0x13e0
? lock_release+0x640/0x640
? pwq_dec_nr_in_flight+0x320/0x320
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x8b/0xd10
? __kthread_parkme+0xd9/0x1d0
? pr
---truncated--- |
| Konica Minolta FTP Utility 1.0 contains a buffer overflow vulnerability in the NLST command that allows attackers to overwrite system registers. Attackers can send an oversized buffer of 1500 'A' characters to crash the FTP server and potentially execute unauthorized code. |
| CloudMe 1.11.2 contains a buffer overflow vulnerability that allows remote attackers to execute arbitrary code through crafted network packets. Attackers can exploit the vulnerability by sending a specially crafted payload to the CloudMe service running on port 8888, enabling remote code execution. |
| IBM PowerVM Hypervisor FW1110.00 through FW1110.03, FW1060.00 through FW1060.51, and FW950.00 through FW950.F0 may expose a limited amount of data to a peer partition in specific shared processor configurations during certain operations. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t
he fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length
field in readPropertySeq — are modified, an integer overflow occurs, leading to an OOM during the resize operation. Versi
ons 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Remote Desktop Audit 2.3.0.157 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code during the Add Computers Wizard file import process. Attackers can craft a malicious payload file to trigger a structured exception handler (SEH) bypass and execute shellcode when importing computer lists. |
| Port Forwarding Wizard 4.8.0 contains a buffer overflow vulnerability that allows local attackers to execute arbitrary code through a long request in the Register feature. Attackers can craft a malicious payload with an egg tag and overwrite SEH handlers to potentially execute shellcode on vulnerable Windows systems. |
| FTPDummy 4.80 contains a local buffer overflow vulnerability in its preference file handling that allows attackers to execute arbitrary code. Attackers can craft a malicious preference file with carefully constructed shellcode to trigger a structured exception handler overwrite and execute system commands. |
| Nidesoft DVD Ripper 5.2.18 contains a local buffer overflow vulnerability in the License Code registration parameter that allows attackers to execute arbitrary code. Attackers can craft a malicious payload and paste it into the License Code field to trigger a stack-based buffer overflow and execute shellcode. |
| An out-of-bounds read in the mk_ptr_to_buf in mk_core function (mk_memory.c) of monkey commit f37e984 allows attackers to cause a Denial of Service (DoS) via sending a crafted HTTP request to the server. |
| An out-of-bounds read in the http_parser_transfer_encoding_chunked function (mk_server/mk_http_parser.c) of monkey commit f37e984 allows attackers to cause a Denial of Service (DoS) via sending a crafted POST request to the server. |
| Socusoft Photo to Video Converter Professional 8.07 contains a local buffer overflow vulnerability in the 'Output Folder' input field that allows attackers to execute arbitrary code. Attackers can craft a malicious payload and paste it into the output folder field to trigger a stack-based buffer overflow and potentially execute shellcode. |
| Some end of service NETGEAR products provide "TelnetEnable" functionality, which allows a magic packet to activate telnet service on the box. |
| An authenticated buffer handling flaw in TP-Link VIGI C385 V1 Web API lacking input sanitization, may allow memory corruption leading to remote code execution. Authenticated attackers may trigger buffer overflow and potentially execute arbitrary code with elevated privileges. |
| NetPCLinker 1.0.0.0 contains a buffer overflow vulnerability in the Clients Control Panel DNS/IP field that allows attackers to execute arbitrary shellcode. Attackers can craft a malicious payload in the DNS/IP input to overwrite SEH handlers and execute shellcode when adding a new client. |
