| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Cloud Pak for Business Automation 25.0.0 through 25.0.0 Interim Fix 002, 24.0.1 through 24.0.1 Interim Fix 005, and 24.0.0 through 24.0.0 Interim Fix 007 could allow an authenticated user to cause a denial of service or corrupt existing data due to the improper validation of input length. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a heap buffer overflow exists in the Fast-DDS DATA_FRAG receive path. An un
authenticated sender can transmit a single malformed RTPS DATA_FRAG packet where `fragmentSize` and `sampleSize` are craft
ed to violate internal assumptions. Due to a 4-byte alignment step during fragment metadata initialization, the code write
s past the end of the allocated payload buffer, causing immediate crash (DoS) and potentially enabling memory corruption (
RCE risk). Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| An out-of-bounds read vulnerability has been identified in the Postscript interpreter in various Lexmark devices. This vulnerability can be leveraged by an attacker to execute arbitrary code as an unprivileged user. |
| A heap-based buffer overflow vulnerability has been identified in the Postscript interpreter in various Lexmark devices. This vulnerability can be leveraged by an attacker to execute arbitrary code as an unprivileged user. |
| LanSend 3.2 contains a buffer overflow vulnerability in the Add Computers Wizard file import functionality that allows remote attackers to execute arbitrary code. Attackers can craft a malicious payload file to trigger a structured exception handler (SEH) overwrite and execute shellcode when importing computers from a file. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t
he fields of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage are tampered with — specifically by ta
mpering with the the `vecsize` value read by `readOctetVector` — a 32-bit integer overflow can occur, causing `std::vector
::resize` to request an attacker-controlled size and quickly trigger OOM and remote process termination. Versions 3.4.1, 3
.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes a heap buffer overflow, resulting in remote termination of Fast-DDS. If the fields
of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage are tampered with — specially `readOctetVector`
reads an unchecked `vecsize` that is propagated unchanged into `readData` as the `length` parameter — the attacker-contro
lled `vecsize` can trigger a 32-bit integer overflow during the `length` calculation. That overflow can cause large alloca
tion attempt that quickly leads to OOM, enabling a remotely-triggerable denial-of-service and remote process termination.
Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes a heap buffer overflow, resulting in remote termination of Fast-DDS. If the fields
of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage — specifically by tampering with the `str_size`
value read by `readString` (called from `readBinaryProperty`) — are modified, a 32-bit integer overflow can occur, causing
`std::vector::resize` to use an attacker-controlled size and quickly trigger heap buffer overflow and remote process term
ination. Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). ParticipantGenericMessage is the DDS Security control-message container that carries not only the handshake but also on
going security-control traffic after the handshake, such as crypto-token exchange, rekeying, re-authentication, and token
delivery for newly appearing endpoints. On receive, the CDR parser is invoked first and deserializes the `message_data` (i
.e., the `DataHolderSeq`) via the `readParticipantGenericMessage → readDataHolderSeq` path. The `DataHolderSeq` is parsed
sequentially: a sequence count (`uint32`), and for each DataHolder the `class_id` string (e.g. `DDS:Auth:PKI-DH:1.0+Req`),
string properties (a sequence of key/value pairs), and binary properties (a name plus an octet-vector). The parser operat
es at a stateless level and does not know higher-layer state (for example, whether the handshake has already completed), s
o it fully unfolds the structure before distinguishing legitimate from malformed traffic. Because RTPS permits duplicates,
delays, and retransmissions, a receiver must perform at least minimal structural parsing to check identity and sequence n
umbers before discarding or processing a message; the current implementation, however, does not "peek" only at a minimal
header and instead parses the entire `DataHolderSeq`. As a result, prior to versions 3.4.1, 3.3.1, and 2.6.11, this parsi
ng behavior can trigger an out-of-memory condition and remotely terminate the process. Versions 3.4.1, 3.3.1, and 2.6.11 p
atch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t
he fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length
field in readBinaryPropertySeq — are modified, an integer overflow occurs, leading to an OOM during the resize operation.
Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| In wlan, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00461651; Issue ID: MSV-4758. |
| In Modem, there is a possible system crash due to incorrect error handling. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01738313; Issue ID: MSV-5935. |
| In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01738293; Issue ID: MSV-5922. |
| In imgsys, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10362725; Issue ID: MSV-5694. |
| A local attacker could cause a full device reset by resetting the device passwords using an invalid reset file via USB. |
| jsPDF is a library to generate PDFs in JavaScript. Prior to 4.1.0, user control of the first argument of the addImage method results in denial of service. If given the possibility to pass unsanitized image data or URLs to the addImage method, a user can provide a harmful BMP file that results in out of memory errors and denial of service. Harmful BMP files have large width and/or height entries in their headers, which lead to excessive memory allocation. The html method is also affected. The vulnerability has been fixed in jsPDF@4.1.0. |
| Stack-based buffer overflow vulnerability exists in ELECOM wireless LAN access point devices. A crafted packet may lead to arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/perf: add sentinel to xehp_oa_b_counters
Arrays passed to reg_in_range_table should end with empty record.
The patch solves KASAN detected bug with signature:
BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]
Read of size 4 at addr ffffffffa1555d90 by task perf/1518
CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1
Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023
Call Trace:
<TASK>
...
xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]
(cherry picked from commit 2f42c5afb34b5696cf5fe79e744f99be9b218798) |
| A vulnerability was identified in the email parsing library due to improper handling of specially formatted recipient email addresses. An attacker can exploit this flaw by crafting a recipient address that embeds an external address within quotes. This causes the application to misdirect the email to the attacker's external address instead of the intended internal recipient. This could lead to a significant data leak of sensitive information and allow an attacker to bypass security filters and access controls. |
| A security flaw has been discovered in D-Link DIR-825 up to 2.10. Affected by this vulnerability is the function sub_4106d4 of the file apply.cgi. The manipulation of the argument countdown_time results in buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be exploited. This vulnerability only affects products that are no longer supported by the maintainer. |
