| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Traefik is an HTTP reverse proxy and load balancer. Versions prior to 3.7.3, 3.6.18, and 2.11.51 have a critical vulnerability in Traefik's HTTP/3 (QUIC) TLS configuration selection that allows unauthenticated clients to bypass router-specific mTLS enforcement. When HTTP/3 is enabled on an entrypoint, the TLS handshake selects the applicable TLS configuration through an exact, case-sensitive lookup on the SNI value, which fails to match wildcard host patterns (e.g., *.example.com) or case variants of the configured hostname. Because the handshake falls back to the default TLS configuration — which may not require client certificates — a client can complete the QUIC handshake without presenting a certificate, while the subsequent HTTP routing layer still dispatches the request to a backend protected by a router-specific mTLS policy. The issue affects deployments where HTTP/3 is enabled, a router uses a wildcard Host rule or case-insensitive hostname matching, a router-specific TLSOptions enforces client certificate authentication, and UDP access to the entrypoint is reachable by an attacker. This vulnerability is fixed in versions 3.7.3, 3.6.18, and 2.11.51. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in get_manuf_info()
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
[ johan: amend commit message; also check for short descriptors ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/list_lru: drain before clearing xarray entry on reparent
memcg_reparent_list_lrus() clears the dying memcg's xarray entry with
xas_store(&xas, NULL) before reparenting its per-node lists into the
parent. This opens a window where a concurrent list_lru_del() arriving
for the dying memcg sees xa_load() == NULL, walks to the parent in
lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls
list_del_init() on an item still physically linked on the dying memcg's
list.
If another in-flight thread holds the dying memcg's per-node lock at the
same moment (another list_lru_del, or a list_lru_walk_one running an
isolate callback), both threads modify ->next/->prev pointers on the same
physical list under different locks. Adjacent items can corrupt each
other's links.
Fix it by reversing the order: reparent each per-node list and mark the
child's list lru dead and then clear the xarray entry. Any concurrent
list_lru op that finds the still-set xarray entry either takes the dying
memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and
walks to the parent, where the items now live. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SimpleTrustManagerFactory.engineGetTrustManagers() and related paths wrap any user-supplied plain X509TrustManager in X509TrustManagerWrapper, which extends X509ExtendedTrustManager but implements the 3-arg checkServerTrusted(chain, authType, SSLEngine) by discarding the SSLEngine and calling the 2-arg delegate. Because the object now IS an X509ExtendedTrustManager, neither SunJSSE's internal AbstractTrustManagerWrapper nor Netty's own OpenSslX509TrustManagerWrapper will re-wrap it to add endpoint-identification. Consequently, even though Netty 4.2 sets endpointIdentificationAlgorithm="HTTPS" by default, a client built with `SslContextBuilder.forClient().trustManager(somePlainX509TrustManager)` performs no hostname verification at all. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Traefik is an HTTP reverse proxy and load balancer. From 3.7.0 until 3.7.3, there is a high severity vulnerability in Traefik's domain-fronting protection (SNICheck) that allows an unauthenticated client to bypass mutual TLS enforced through wildcard router TLSOptions. When a router uses a wildcard host rule such as Host(*.example.com) with stricter TLS options (for example RequireAndVerifyClientCert), SNICheck resolves the TLS options for the HTTP Host header using exact map lookups only and never applies wildcard matching. If another permissive SNI is served on the same entrypoint, an attacker can complete the TLS handshake under the permissive options and then send an HTTP Host header targeting the wildcard-protected backend, reaching it without presenting a client certificate. This affects the regular HTTPS / HTTP-2 path and does not require HTTP/3. This vulnerability is fixed in 3.7.3. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's `DnsResolveContext` insufficiently validates the bailiwick of NS records, enabling DNS Cache Poisoning. An attacker controlling an authoritative name server for a subdomain can poison the cache for parent domains (like `.co.uk`). In `io.netty.resolver.dns.DnsResolveContext.AuthoritativeNameServerList#add` method accepts any NS record from the AUTHORITY section as long as the record's name is a suffix of the questionName. Subsequently, the `handleWithAdditional` method caches the associated A records from the ADDITIONAL section directly into the `authoritativeDnsServerCache` under the parent domain's key. This bypasses standard bailiwick rules, where a server authoritative for a subdomain should not be trusted to provide authoritative records for its parent. The poisoned cache is then used for all future resolutions under the parent domain's key. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's DnsResolveContext fails to validate the origin (bailiwick) of CNAME records in DNS responses. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Buffer Over-read vulnerability in Apache HTTP Server via outbound OCSP requests to an attacker controlled OCSP server
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes the issue. |
| An issue was discovered in OpenStack ironic-python-agent 1.0.0 through 11.5.0. Ironic Python Agent (IPA) sometimes executes grub-install from within a chroot of the deployed partition image, leading to code execution in the case of a malicious image. |
| Heap-based Buffer Overflow vulnerability in Apache HTTP Server with mod_xml2enc, xml2StartParse, and untrusted content
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes the issue. |
| Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2. |
| protobufjs compiles protobuf definitions into JavaScript (JS) functions. In versions prior to 8.0.1 and 7.5.5, attackers can inject arbitrary code in the "type" fields of protobuf definitions, which will then execute during object decoding using that definition. Versions 8.0.1 and 7.5.5 patch the issue. |
| In Micrometer, it is possible for a user to provide specially crafted HTTP requests that may cause a denial-of-service (DoS) condition.
Affected versions:
micrometer-core 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18; 1.9.0 through 1.9.17.
micrometer-jetty11 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18.
micrometer-jetty12 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18. |
| In Micrometer, it is possible for a user to provide specially crafted gRPC requests that may cause a denial-of-service (DoS) condition.
Affected versions:
Micrometer 1.16.0 through 1.16.5; 1.15.0 through 1.15.11. |
| SSH servers which use CertChecker as a public key callback without setting IsUserAuthority or IsHostAuthority could be caused to panic by a client presenting a certificate. CertChecker now returns an error instead of panicking when these callbacks are nil. |
| The RSA and DSA public key parsers did not enforce size limits on key parameters. A crafted public key with an excessively large modulus or DSA parameter could cause several minutes of CPU consumption during signature verification. This could be triggered by unauthenticated clients during public key authentication. RSA moduli are now limited to 8192 bits, and DSA parameters are validated per FIPS 186-2. |
| A buffer overflow in mod_proxy_html in Apache HTTP Server 2.4.67 and earlier allows an attack by an untrusted backend.
Users are recommended to upgrade to version 2.4.68, which fixes this issue. |
| There is a lack of XSS escaping in the Spark History Server prior to 3.5.8 which allows a malicious Spark job to generate arbitrary unescaped frontend code which could lead to a minimal privilege escalation in browser. Users are encouraged to upgrade to Spark 3.5.8 or later.
This CVE is marked as "low" since the path to exploit requires both relatively high permissions (ability to launch a Spark job) and requires tricking a user with higher permissions to log in and visit the Spark history web page.
Users are encouraged to upgrade their Spark history servers to Spark 3.5.8 or later. |
