| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix buffer overflow in SMB2_tcon()
In SMB2_tcon(), unc_path is allocated with a fixed buffer size of
MAX_SHARENAME_LENGTH * 2 bytes (672 bytes). However, the user-controlled
UNC path (tree) length is passed to cifs_strtoUTF16(), which assumes the
destination buffer is large enough and writes strlen(tree) + 1 UTF-16 code
units.
Commit 62a1a439e0fd ("cifs: clean up handling of unc= option") removed the
length check on UNC mount options, allowing mount paths to exceed
MAX_SHARENAME_LENGTH while retaining the fixed-size buffer allocation in
SMB2_tcon(). Consequently, an oversized UNC string causes cifs_strtoUTF16()
to write past the end of the heap object, resulting in a slab-out-of-bounds
write. Furthermore, if a tree exceeds MAX_TREE_SIZE characters, strscpy()
truncates it in cifs_tcon::tree_name, causing subsequent reconnects or
failovers to fail.
Fix this by first verifying that the length of tree does not exceed
MAX_TREE_SIZE, returning -EINVAL if it does. Then, dynamically allocate
unc_path based on the length of tree so that it safely accommodates all
UTF-16 code units for paths within MAX_TREE_SIZE.
[pc: remove unused MAX_SHARENAME_LENGTH] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reclaim credits for decrypted reads with no matching mid
When a decrypted SMB2 READ response carries a MessageId that matches no
outstanding request, both the inline receive_encrypted_read() and the
offloaded smb2_decrypt_offload() paths drop the frame without accounting
the credits the server granted in it. The plaintext unknown-frame path in
cifs_demultiplex_thread() already reclaims them with
smb2_add_credits_from_hdr(), so encrypted reads leak credits that the
plaintext path would not.
This also happens for legitimate frames - e.g. a reply that arrives after
the client has timed out and dropped the mid - so over a long-lived
connection the client's credit count drifts down and can eventually starve
it of the ability to issue requests. The frame is AEAD-authenticated, so
the granted credits in the decrypted header come from the real server and
are safe to apply.
Reclaim the credits from the decrypted header before dropping the frame,
and export smb2_add_credits_from_hdr() so the SMB2 receive paths can use it. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate NT transaction response layout and offsets
validate_ntransact() assumes that the response uses the fixed 18-word NT
transaction layout. A different WordCount makes get_bcc() locate the byte
count at a different offset from pSMBr->ByteCount, allowing the subsequent
bounds checks to use inconsistent response boundaries.
The function also turns the 32-bit ParameterOffset and DataOffset fields
into pointers before checking their bounds. On a 32-bit client, a large
offset can wrap the pointer below end_of_smb and pass the one-sided pointer
comparison. The caller then dereferences the parameter pointer or copies
from the data pointer.
Require the expected WordCount before reading the byte count. Check each
offset and count against the received SMB length as integers before forming
either pointer. Use subtraction after validating the offset so that the
range checks cannot overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate SMB1 EA list bounds before parsing
CIFSSMBQAllEAs() checks the server-provided EA list length by adding it
to the response pointer. On 32-bit systems, a positive length can wrap
the pointer and pass the comparison. The parser then walks outside the
received response while reading the next FEA header.
A response with a list length of 0x40000000 reproduces this as a native
i386 page fault and kernel panic from listxattr() against an SMB1
server.
Check that the EA list starts within the SMB byte area before reading
its header. Keep its length unsigned and compare it with the bytes left
in the response without pointer addition.
SMB1 is not negotiated by default and requires an explicit vers=1.0
mount. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: copy SETXATTR data from all XDR buffer segments
nfsd4_vbuf_from_vector() manually copies the head followed by whole
pages starting at offset zero. This assumes that all remaining data
starts at the beginning of the page array and that no data is stored
in the tail.
However, nfsd4_decode_setxattr() passes an xdr_buf returned by
xdr_stream_subsegment(). Such a sub-buffer can have a nonzero
page_base and can span its page and tail segments. Ignoring that
layout can copy the wrong bytes into the value passed to
vfs_setxattr().
Use read_bytes_from_xdr_buf(), which observes the complete xdr_buf
layout. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't modify a session slot when replaying its cached reply
nfsd4_sequence() claims a session slot by setting NFSD4_SLOT_INUSE
under nn->client_lock. A reply served from the slot's reply cache does
not claim it, and that distinction lived only in cstate->status, which
nfsd4_sequence() set to nfserr_replay_cache. Commit cc028a10a48c
("NFSD: Hoist status code encoding into XDR encoder functions") moved
nfsd4_proc_compound()'s cstate->status assignment below the out:
label, and the replay path's goto out was the one path that relied on
skipping it. The test in nfsd4_sequence_done() therefore no longer
identifies a replay, and every replay now stores its reply and clears
NFSD4_SLOT_INUSE as though it owned the slot.
NFSD4_SLOT_INUSE is the interlock: check_slot_seqid() rejects every
sequence id for a slot that is in use, before replay_matches_cache()
runs. A replay never sets it, so two replays can be in flight on the
same slot at once. One can read slot->sl_cred under nn->client_lock
while the other's completion frees and rebuilds it from the XDR
encoder without that lock. Two completions can also collide with each
other and release the same group_info twice. free_svc_cred() leaves
cr_uid, cr_gid and cr_flavor intact, so the reader passes every
earlier test in same_creds() and dereferences a NULL cr_group_info.
From a 6.12.91 production server:
BUG: kernel NULL pointer dereference, address: 0000000000000004
CPU: 63 UID: 0 PID: 39015 Comm: nfsd
RIP: 0010:same_creds+0x38/0xa0 [nfsd]
RDX: 0000000000000000
Call Trace:
nfsd4_sequence+0x6a8/0x910 [nfsd]
nfsd4_proc_compound+0x345/0x670 [nfsd]
nfsd_dispatch+0x100/0x220 [nfsd]
svc_process_common+0x311/0x700 [sunrpc]
svc_process+0x131/0x1c0 [sunrpc]
svc_recv+0x7ef/0x9c0 [sunrpc]
nfsd+0xa3/0x100 [nfsd]
Kernel panic - not syncing: Fatal exception
Since v6.14 a live session's slot table can shrink, and the unowned
store becomes a use-after-free write. nfsd4_sequence() defers the
shrink while a slot is in use, but it tests NFSD4_SLOT_INUSE, which a
replay does not set, so free_session_slots() can kfree() the slot the
replay still holds in cstate->slot.
Record the claim in cstate->slot_owned when nfsd4_sequence() accepts a
request and test that in nfsd4_sequence_done(), so only the request
that claimed the slot updates its cached reply and clears
NFSD4_SLOT_INUSE. svc_generic_init_request() zeroes the compound
response before each request, so the flag starts clear. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Do not credit control-record octets to the RPC stream
svc_tcp_sock_recv_cmsg() receives up to two octets into a local
buffer, and returns that count for any record type other than
TLS_RECORD_TYPE_ALERT. Nothing reached the caller's buffer, but
svc_tcp_read_marker() adds the count to sk_tcplen and
svc_tcp_read_msg()'s caller adds it to sk_datalen. The RPC stream
advances over octets it never received. The fragment marker is
assembled from stale sk_marker octets. The message body comes from
pages nothing wrote.
A conforming client reaches this. RFC 8446 Section 4.6.3 lets either
peer send KeyUpdate once it has sent its Finished, and svcsock has no
rekey path. kTLS leaves the partially consumed record on ctx->rx_list,
so the body drains two octets per svc_tcp_recvfrom() call. Each pair
is credited the same way.
Return -EAGAIN for a record that is not an alert. That is what
svc_tcp_sock_process_cmsg()'s default arm returned before the receive
moved into a local buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: fix oversized GSS proxy token copy
gss_read_proxy_verf() allocates one page per token chunk, but it copies the
entire linear head of an RPC request into in_token->pages[0]. A UDP datagram
can leave more than PAGE_SIZE bytes in the linear head, so a large
RPCSEC_GSS INIT token overwrites following pages.
Copy the linear head in page-sized chunks before switching to the request
page array. The linear head itself can span multiple pages. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch
When the pCPU where the VMCB was most recently used is switched, reset
the ASID generation in both VMCBs, triggering new ASID allocation for
the immediate VMRUN as well as the next VMRUN on the other VMCB.
The ASID is shared between vmcb01 and vmcb02, and gets flushed on every
nested transition. However, since pCPU tracking is done per VMCB, it is
possible for one VMCB to allocate a new ASID when migrated to a new
pCPU, and then the other VMCB reuses that ASID on the old pCPU. This can
result in the same ASID being used by multiple vCPUs on the old pCPU.
Example scenario:
- vCPU runs on pCPU A, vmcb01 is active, asid=1.
- vCPU migrates to pCPU B, vmcb01 pCPU changes, new asid=2.
- Another vCPU runs on pCPU A and allocates asid=2 as well.
- vCPU migrates back to pCPU A, and then switches to vmcb02 before it
runs again with vmcb01.
- No pCPU switch is detected for vmcb02, so VMRUN is done with asid=2.
- Two vCPUs end up using asid=2 on the same pCPU.
Keep the VMCB dirtying to the active VMCB only. Clean bits are tracked
by a pCPU for each VMCB, so do not unnecessarily dirty a VMCB if its
pCPU does not change.
Additionally, initialize the tracked pCPU for vmcb02 to -1 on nested
enablement as hardening, so that a new ASID allocation is always
triggered when nested is disabled and re-enabled.
No performance regression was noticed when overcommitting L1 vCPUs in L0
(to force rescheduling), pinning L1 <-> L2 vCPUs, and running CPUID in a
tight loop bouncing between 2 vCPUs in L2.
An alternative (and perhaps more proper) fix would be tracking the ASID
per-VMCB instead (e.g. [1]). However, that's a more involved change, and
it would result in having different ASIDs for L1 and L2 without actually
properly maintaining them. It would probably work because all TLB
flushes target the current VMCB, and the other VMCB is always flushed on
nested transitions, but the code ends up in an arguably more fragile
state. Punt a proper clean fix to an incoming (and overdue) overhaul of
SVM's ASID usage [2].
[1] https://lore.kernel.org/lkml/20250205182402.2147495-2-yosry.ahmed@linux.dev
[2] https://lore.kernel.org/kvm/20260728003557.1136583-1-yosry@kernel.org |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Reject KVM_SET_NESTED_STATE if L1 has EFER.LMA=1 && EFER.LME=0
Reject KVM_SET_NESTED_STATE if the incoming L1 host state has what is
effectively an impossible EFER combination of LMA=1 but LME=0, i.e. if the
state says long mode is active but not enabled. Unlike VMX, SVM doesn't
have an explicit consistent check for the illegal combination; presumably
hardware simply ignores EFER.LMA if EFER.LME=0.
Unfortunately, KVM doesn't ignore EFER.LMA in this case and consumes the
illegal state when constructing the shadow MMU for L2. E.g. if userspace
also clears CR4.PAE, then kvm_calc_cpu_role() will compute a role with 4 or
5 levels of paging, but shadow_mmu_init_context() will wire up the MMU to
use the paging32 template, which maxes out its levels at 2.
Note, the "real badness" is effectively the same as what happened with the
nVMX bug fixed by commit 112e66017bff ("KVM: nVMX: add missing consistency
checks for CR0 and CR4"). Unfortunately, the sanity check added by commit
72e2fb24a0b0 ("KVM: x86/mmu: Bug the VM if a vCPU ends up in long mode
without PAE enabled") doesn't work for this case, since L2 state is active
at the time of the page fault, but it's L1 that has the bad state. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has
Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard
against KVM configuring a paging32 MMU with more than 2 levels of paging,
with a very explicit check for exactly that: that KVM isn't trying to walk
more levels of paging than the MMU template provides. I.e. harden KVM
against all bugs that would cause KVM to generates accesses beyond the
bounds of guest_walker's arrays, regardless of how KVM ended up with the
misconfigured MMU.
Note, don't use w->cpu_role.base.level directly as the paging64 template
only provides two levels of page tables for PAE paging on 32-bit hosts, and
handles the third level by manually emulating the PDPTR access. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Take SRCU in kvm_zap_gfn_range()
kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to
reschedule. Callers that do not already hold kvm->srcu (or slots_lock)
can race with memslot deletion: synchronize_srcu_expedited() does not
wait, kvm_free_memslot() frees the old slot and its rmap, and the zap
resumes on freed memory.
The VFIO noncoherent-DMA path hits this by zapping the entire GPA
space without SRCU. KASAN reported:
BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0
Read of size 8 at addr ffffc900005c1008
Call Trace:
slot_rmap_walk_next+0x82/0x1c0
__kvm_rmap_zap_gfn_range+0x17a/0x280
kvm_zap_gfn_range+0x2a6/0x6a0
kvm_vfio_set_attr+0x576/0x770
kvm_device_ioctl+0x1ff/0x3b0
Take SRCU inside kvm_zap_gfn_range() so every caller is covered.
Nesting with an existing kvm->srcu critical section is fine; the
helper uses a local index. Drop the now-redundant SRCU pair from
__kvm_set_or_clear_apicv_inhibit(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: take the invalidate lock when unbinding a dying file
kvm_gmem_unbind() takes mapping->invalidate_lock only if the
get_file_active() succeeds. When the guest_memfd file is dying, its
reference count is already zero so get_file_active fails and the binding
is removed without holding the invalidate lock.
kvm_gmem_invalidate_{start,end}() checks f->bindings independently to
decide whether to begin or end KVM MMU invalidation. So, the bindings
must therefore remain stable between the two calls. Otherwise, unbind
can remove a binding after start increments mmu_invalidate_in_progress,
but before end finds the binding and decrements it.
Example, unbind race with memory failure:
CPU 0: memory failure CPU 1: memslot delete
---------------------------------- ---------------------------
(guest_memfd file is dying)
kvm_gmem_error_folio()
kvm_gmem_invalidate_start()
finds binding
mmu_invalidate_in_progress++
kvm_gmem_unbind()
get_file_active() fails
removes binding
kvm_gmem_invalidate_end()
no binding found
counter stays elevated
mmu_invalidate_retry() then returns 1 forever, so guest page faults
retry without ever installing a mapping and the guest hangs.
Remove the distinction between live and dying files in the unbind path.
Always use slot->gmem.file and take the invalidate lock when it's non-NULL.
Normal unbind callers hold slots_lock, which prevents release from clearing
the pointer or freeing the file state until unbind completes. Final VM
teardown can only see a NULL pointer because guest_memfd pins the KVM until
release has cleared all bindings. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: rebind completed CREATE replays without draining the old channel
A completed DurableHandleReqV2 CREATE can be replayed through another
channel while its original channel is exiting. The existing replay path
returns the open but leaves its connection and oplock references pointing
at the old channel. Its open count also stays on that channel, and a
later CLOSE through the surviving channel decrements the wrong counter.
After checking the owner, lease key and persistent flag, verify that an
active open is still published in the requesting session's file table.
Do this even when no oplock was granted, and before processing a consumed
replay. Do not read a borrowed opinfo session pointer for this check.
Keep a healthy original binding. If the original channel is exiting or
releasing, move the open and its own oplock references to the requesting
channel. Serialize this with CLOSE using the session file-table lock,
and with detach, reconnect and notification snapshots using m_lock.
The earlier lock index and lease-table changes make their lifetimes
independent of this connection change. No old-channel r_count wait is
needed, including when an unrelated request remains active there.
Account final close against fp->conn in one place, balance durable detach
and reconnect, and transfer the count with a replay binding change. A
final global lookup put may run after CLOSE has removed the volatile id;
unlink the open from the inode list on that final close as well.
A live completed CREATE replay may follow a break that lowered the
durable open's batch oplock. Apply the batch eligibility check only to
detached reconnects, while retaining the owner, lease key and persistent
flag checks for active replays. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Elementor Image Optimizer by Elementor image-optimization allows Path Traversal.This issue affects Image Optimizer by Elementor: from n/a through 1.7.7. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in NextScripts NextScripts social-networks-auto-poster-facebook-twitter-g allows Stored XSS.This issue affects NextScripts: from n/a through 4.4.8. |
| Missing Authorization vulnerability in Wetail AB WooCommerce Fortnox Integration woocommerce-fortnox-integration allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WooCommerce Fortnox Integration: from n/a through 4.8.1. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Wetail AB WooCommerce Fortnox Integration woocommerce-fortnox-integration allows Stored XSS.This issue affects WooCommerce Fortnox Integration: from n/a through 4.8.1. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in PluginUs.Net Active Products Tables for WooCommerce profit-products-tables-for-woocommerce allows Reflected XSS.This issue affects Active Products Tables for WooCommerce: from n/a through 2.1.8. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Boone Gorges BuddyPress Docs buddypress-docs allows Stored XSS.This issue affects BuddyPress Docs: from n/a through 2.2.7. |