| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: Add NULL check in udma_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
udma_probe() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: Reorder clock handling and power management in probe
Reorder the initialization sequence in `usbhs_probe()` to enable runtime
PM before accessing registers, preventing potential crashes due to
uninitialized clocks.
Currently, in the probe path, registers are accessed before enabling the
clocks, leading to a synchronous external abort on the RZ/V2H SoC.
The problematic call flow is as follows:
usbhs_probe()
usbhs_sys_clock_ctrl()
usbhs_bset()
usbhs_write()
iowrite16() <-- Register access before enabling clocks
Since `iowrite16()` is performed without ensuring the required clocks are
enabled, this can lead to access errors. To fix this, enable PM runtime
early in the probe function and ensure clocks are acquired before register
access, preventing crashes like the following on RZ/V2H:
[13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
[13.280814] Modules linked in: cec renesas_usbhs(+) drm_kms_helper fuse drm backlight ipv6
[13.289088] CPU: 1 UID: 0 PID: 195 Comm: (udev-worker) Not tainted 6.14.0-rc7+ #98
[13.296640] Hardware name: Renesas RZ/V2H EVK Board based on r9a09g057h44 (DT)
[13.303834] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[13.310770] pc : usbhs_bset+0x14/0x4c [renesas_usbhs]
[13.315831] lr : usbhs_probe+0x2e4/0x5ac [renesas_usbhs]
[13.321138] sp : ffff8000827e3850
[13.324438] x29: ffff8000827e3860 x28: 0000000000000000 x27: ffff8000827e3ca0
[13.331554] x26: ffff8000827e3ba0 x25: ffff800081729668 x24: 0000000000000025
[13.338670] x23: ffff0000c0f08000 x22: 0000000000000000 x21: ffff0000c0f08010
[13.345783] x20: 0000000000000000 x19: ffff0000c3b52080 x18: 00000000ffffffff
[13.352895] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000827e36ce
[13.360009] x14: 00000000000003d7 x13: 00000000000003d7 x12: 0000000000000000
[13.367122] x11: 0000000000000000 x10: 0000000000000aa0 x9 : ffff8000827e3750
[13.374235] x8 : ffff0000c1850b00 x7 : 0000000003826060 x6 : 000000000000001c
[13.381347] x5 : 000000030d5fcc00 x4 : ffff8000825c0000 x3 : 0000000000000000
[13.388459] x2 : 0000000000000400 x1 : 0000000000000000 x0 : ffff0000c3b52080
[13.395574] Call trace:
[13.398013] usbhs_bset+0x14/0x4c [renesas_usbhs] (P)
[13.403076] platform_probe+0x68/0xdc
[13.406738] really_probe+0xbc/0x2c0
[13.410306] __driver_probe_device+0x78/0x120
[13.414653] driver_probe_device+0x3c/0x154
[13.418825] __driver_attach+0x90/0x1a0
[13.422647] bus_for_each_dev+0x7c/0xe0
[13.426470] driver_attach+0x24/0x30
[13.430032] bus_add_driver+0xe4/0x208
[13.433766] driver_register+0x68/0x130
[13.437587] __platform_driver_register+0x24/0x30
[13.442273] renesas_usbhs_driver_init+0x20/0x1000 [renesas_usbhs]
[13.448450] do_one_initcall+0x60/0x1d4
[13.452276] do_init_module+0x54/0x1f8
[13.456014] load_module+0x1754/0x1c98
[13.459750] init_module_from_file+0x88/0xcc
[13.464004] __arm64_sys_finit_module+0x1c4/0x328
[13.468689] invoke_syscall+0x48/0x104
[13.472426] el0_svc_common.constprop.0+0xc0/0xe0
[13.477113] do_el0_svc+0x1c/0x28
[13.480415] el0_svc+0x30/0xcc
[13.483460] el0t_64_sync_handler+0x10c/0x138
[13.487800] el0t_64_sync+0x198/0x19c
[13.491453] Code: 2a0103e1 12003c42 12003c63 8b010084 (79400084)
[13.497522] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
serial: Fix potential null-ptr-deref in mlb_usio_probe()
devm_ioremap() can return NULL on error. Currently, mlb_usio_probe()
does not check for this case, which could result in a NULL pointer
dereference.
Add NULL check after devm_ioremap() to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: prevent deactivate active config while enabling the config
While enable active config via cscfg_csdev_enable_active_config(),
active config could be deactivated via configfs' sysfs interface.
This could make UAF issue in below scenario:
CPU0 CPU1
(sysfs enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
unload module
// access to config_desc which freed
// while unloading module.
cscfg_csdev_enable_config
To address this, use cscfg_config_desc's active_cnt as a reference count
which will be holded when
- activate the config.
- enable the activated config.
and put the module reference when config_active_cnt == 0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping
The stmmac platform drivers that do not open-code the clk_ptp_rate value
after having retrieved the default one from the device-tree can end up
with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will
eventually propagate up to PTP initialization when bringing up the
interface, leading to a divide by 0:
Division by zero in kernel.
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22
Hardware name: STM32 (Device Tree Support)
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x6c/0x8c
dump_stack_lvl from Ldiv0_64+0x8/0x18
Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4
stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c
stmmac_hw_setup from __stmmac_open+0x18c/0x434
__stmmac_open from stmmac_open+0x3c/0xbc
stmmac_open from __dev_open+0xf4/0x1ac
__dev_open from __dev_change_flags+0x1cc/0x224
__dev_change_flags from dev_change_flags+0x24/0x60
dev_change_flags from ip_auto_config+0x2e8/0x11a0
ip_auto_config from do_one_initcall+0x84/0x33c
do_one_initcall from kernel_init_freeable+0x1b8/0x214
kernel_init_freeable from kernel_init+0x24/0x140
kernel_init from ret_from_fork+0x14/0x28
Exception stack(0xe0815fb0 to 0xe0815ff8)
Prevent this division by 0 by adding an explicit check and error log
about the actual issue. While at it, remove the same check from
stmmac_ptp_register, which then becomes duplicate |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix udp gso skb_segment after pull from frag_list
Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after
pull from frag_list") detected invalid geometry in frag_list skbs and
redirects them from skb_segment_list to more robust skb_segment. But some
packets with modified geometry can also hit bugs in that code. We don't
know how many such cases exist. Addressing each one by one also requires
touching the complex skb_segment code, which risks introducing bugs for
other types of skbs. Instead, linearize all these packets that fail the
basic invariants on gso fraglist skbs. That is more robust.
If only part of the fraglist payload is pulled into head_skb, it will
always cause exception when splitting skbs by skb_segment. For detailed
call stack information, see below.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify fraglist skbs, breaking these invariants.
In extreme cases they pull one part of data into skb linear. For UDP,
this causes three payloads with lengths of (11,11,10) bytes were
pulled tail to become (12,10,10) bytes.
The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because
payload was pulled into head_skb, it needs to be linearized before pass
to regular skb_segment.
skb_segment+0xcd0/0xd14
__udp_gso_segment+0x334/0x5f4
udp4_ufo_fragment+0x118/0x15c
inet_gso_segment+0x164/0x338
skb_mac_gso_segment+0xc4/0x13c
__skb_gso_segment+0xc4/0x124
validate_xmit_skb+0x9c/0x2c0
validate_xmit_skb_list+0x4c/0x80
sch_direct_xmit+0x70/0x404
__dev_queue_xmit+0x64c/0xe5c
neigh_resolve_output+0x178/0x1c4
ip_finish_output2+0x37c/0x47c
__ip_finish_output+0x194/0x240
ip_finish_output+0x20/0xf4
ip_output+0x100/0x1a0
NF_HOOK+0xc4/0x16c
ip_forward+0x314/0x32c
ip_rcv+0x90/0x118
__netif_receive_skb+0x74/0x124
process_backlog+0xe8/0x1a4
__napi_poll+0x5c/0x1f8
net_rx_action+0x154/0x314
handle_softirqs+0x154/0x4b8
[118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278!
[118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000
[118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000
[118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO)
[118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14
[118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14
[118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770 |
| In the Linux kernel, the following vulnerability has been resolved:
gve: add missing NULL check for gve_alloc_pending_packet() in TX DQO
gve_alloc_pending_packet() can return NULL, but gve_tx_add_skb_dqo()
did not check for this case before dereferencing the returned pointer.
Add a missing NULL check to prevent a potential NULL pointer
dereference when allocation fails.
This improves robustness in low-memory scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Set dma_mask for ffa devices
Set dma_mask for FFA devices, otherwise DMA allocation using the device pointer
lead to following warning:
WARNING: CPU: 1 PID: 1 at kernel/dma/mapping.c:597 dma_alloc_attrs+0xe0/0x124 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store()
If the 'buf' array received from the user contains an empty string, the
'length' variable will be zero. Accessing the 'buf' array element with
index 'length - 1' will result in a buffer overflow.
Add a check for an empty string.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix timeout on deleted connection
NOPIN response timer may expire on a deleted connection and crash with
such logs:
Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d
BUG: Kernel NULL pointer dereference on read at 0x00000000
NIP strlcpy+0x8/0xb0
LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod]
Call Trace:
iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod]
call_timer_fn+0x58/0x1f0
run_timer_softirq+0x740/0x860
__do_softirq+0x16c/0x420
irq_exit+0x188/0x1c0
timer_interrupt+0x184/0x410
That is because nopin response timer may be re-started on nopin timer
expiration.
Stop nopin timer before stopping the nopin response timer to be sure
that no one of them will be re-started. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ch9200: fix uninitialised access during mii_nway_restart
In mii_nway_restart() the code attempts to call
mii->mdio_read which is ch9200_mdio_read(). ch9200_mdio_read()
utilises a local buffer called "buff", which is initialised
with control_read(). However "buff" is conditionally
initialised inside control_read():
if (err == size) {
memcpy(data, buf, size);
}
If the condition of "err == size" is not met, then
"buff" remains uninitialised. Once this happens the
uninitialised "buff" is accessed and returned during
ch9200_mdio_read():
return (buff[0] | buff[1] << 8);
The problem stems from the fact that ch9200_mdio_read()
ignores the return value of control_read(), leading to
uinit-access of "buff".
To fix this we should check the return value of
control_read() and return early on error. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: LPIT: Avoid u32 multiplication overflow
In lpit_update_residency() there is a possibility of overflow
in multiplication, if tsc_khz is large enough (> UINT_MAX/1000).
Change multiplication to mul_u32_u32().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: video: check for error while searching for backlight device parent
If acpi_get_parent() called in acpi_video_dev_register_backlight()
fails, for example, because acpi_ut_acquire_mutex() fails inside
acpi_get_parent), this can lead to incorrect (uninitialized)
acpi_parent handle being passed to acpi_get_pci_dev() for detecting
the parent pci device.
Check acpi_get_parent() result and set parent device only in case of success.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: tpd12s015: Drop buggy __exit annotation for remove function
With tpd12s015_remove() marked with __exit this function is discarded
when the driver is compiled as a built-in. The result is that when the
driver unbinds there is no cleanup done which results in resource
leakage or worse. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: discard table flag update with pending basechain deletion
Hook unregistration is deferred to the commit phase, same occurs with
hook updates triggered by the table dormant flag. When both commands are
combined, this results in deleting a basechain while leaving its hook
still registered in the core. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject new basechain after table flag update
When dormant flag is toggled, hooks are disabled in the commit phase by
iterating over current chains in table (existing and new).
The following configuration allows for an inconsistent state:
add table x
add chain x y { type filter hook input priority 0; }
add table x { flags dormant; }
add chain x w { type filter hook input priority 1; }
which triggers the following warning when trying to unregister chain w
which is already unregistered.
[ 127.322252] WARNING: CPU: 7 PID: 1211 at net/netfilter/core.c:50 1 __nf_unregister_net_hook+0x21a/0x260
[...]
[ 127.322519] Call Trace:
[ 127.322521] <TASK>
[ 127.322524] ? __warn+0x9f/0x1a0
[ 127.322531] ? __nf_unregister_net_hook+0x21a/0x260
[ 127.322537] ? report_bug+0x1b1/0x1e0
[ 127.322545] ? handle_bug+0x3c/0x70
[ 127.322552] ? exc_invalid_op+0x17/0x40
[ 127.322556] ? asm_exc_invalid_op+0x1a/0x20
[ 127.322563] ? kasan_save_free_info+0x3b/0x60
[ 127.322570] ? __nf_unregister_net_hook+0x6a/0x260
[ 127.322577] ? __nf_unregister_net_hook+0x21a/0x260
[ 127.322583] ? __nf_unregister_net_hook+0x6a/0x260
[ 127.322590] ? __nf_tables_unregister_hook+0x8a/0xe0 [nf_tables]
[ 127.322655] nft_table_disable+0x75/0xf0 [nf_tables]
[ 127.322717] nf_tables_commit+0x2571/0x2620 [nf_tables] |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: Fix incorrect descriptor free behavior
ENA has two types of TX queues:
- queues which only process TX packets arriving from the network stack
- queues which only process TX packets forwarded to it by XDP_REDIRECT
or XDP_TX instructions
The ena_free_tx_bufs() cycles through all descriptors in a TX queue
and unmaps + frees every descriptor that hasn't been acknowledged yet
by the device (uncompleted TX transactions).
The function assumes that the processed TX queue is necessarily from
the first category listed above and ends up using napi_consume_skb()
for descriptors belonging to an XDP specific queue.
This patch solves a bug in which, in case of a VF reset, the
descriptors aren't freed correctly, leading to crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: complete validation of user input
In my recent commit, I missed that do_replace() handlers
use copy_from_sockptr() (which I fixed), followed
by unsafe copy_from_sockptr_offset() calls.
In all functions, we can perform the @optlen validation
before even calling xt_alloc_table_info() with the following
check:
if ((u64)optlen < (u64)tmp.size + sizeof(tmp))
return -EINVAL; |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix TASK_SIZE on 64-bit NOMMU
On NOMMU, userspace memory can come from anywhere in physical RAM. The
current definition of TASK_SIZE is wrong if any RAM exists above 4G,
causing spurious failures in the userspace access routines. |
| In the Linux kernel, the following vulnerability has been resolved:
cpu: Re-enable CPU mitigations by default for !X86 architectures
Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it
on for all architectures exception x86. A recent commit to turn
mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta
missed that "cpu_mitigations" is completely generic, whereas
SPECULATION_MITIGATIONS is x86-specific.
Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it
select CPU_MITIGATIONS, as having two configs for the same thing is
unnecessary and confusing. This will also allow x86 to use the knob to
manage mitigations that aren't strictly related to speculative
execution.
Use another Kconfig to communicate to common code that CPU_MITIGATIONS
is already defined instead of having x86's menu depend on the common
CPU_MITIGATIONS. This allows keeping a single point of contact for all
of x86's mitigations, and it's not clear that other architectures *want*
to allow disabling mitigations at compile-time. |
