| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ptp->n_vclocks_mux);
lock(&ptp->n_vclocks_mux);
*** DEADLOCK ***
....
============================================
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix NULL pointer deference on eir_get_service_data
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare()
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/skx_common: Fix general protection fault
After loading i10nm_edac (which automatically loads skx_edac_common), if
unload only i10nm_edac, then reload it and perform error injection testing,
a general protection fault may occur:
mce: [Hardware Error]: Machine check events logged
Oops: general protection fault ...
...
Workqueue: events mce_gen_pool_process
RIP: 0010:string+0x53/0xe0
...
Call Trace:
<TASK>
? die_addr+0x37/0x90
? exc_general_protection+0x1e7/0x3f0
? asm_exc_general_protection+0x26/0x30
? string+0x53/0xe0
vsnprintf+0x23e/0x4c0
snprintf+0x4d/0x70
skx_adxl_decode+0x16a/0x330 [skx_edac_common]
skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common]
skx_mce_check_error+0x17/0x20 [skx_edac_common]
...
The issue arose was because the variable 'adxl_component_count' (inside
skx_edac_common), which counts the ADXL components, was not reset. During
the reloading of i10nm_edac, the count was incremented by the actual number
of ADXL components again, resulting in a count that was double the real
number of ADXL components. This led to an out-of-bounds reference to the
ADXL component array, causing the general protection fault above.
Fix this issue by resetting the 'adxl_component_count' in adxl_put(),
which is called during the unloading of {skx,i10nm}_edac. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Add cond_resched() to ftrace_graph_set_hash()
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced. |
| In the Linux kernel, the following vulnerability has been resolved:
objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds()
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx() |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on ino and xnid
syzbot reported a f2fs bug as below:
INFO: task syz-executor140:5308 blocked for more than 143 seconds.
Not tainted 6.14.0-rc7-syzkaller-00069-g81e4f8d68c66 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor140 state:D stack:24016 pid:5308 tgid:5308 ppid:5306 task_flags:0x400140 flags:0x00000006
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5378 [inline]
__schedule+0x190e/0x4c90 kernel/sched/core.c:6765
__schedule_loop kernel/sched/core.c:6842 [inline]
schedule+0x14b/0x320 kernel/sched/core.c:6857
io_schedule+0x8d/0x110 kernel/sched/core.c:7690
folio_wait_bit_common+0x839/0xee0 mm/filemap.c:1317
__folio_lock mm/filemap.c:1664 [inline]
folio_lock include/linux/pagemap.h:1163 [inline]
__filemap_get_folio+0x147/0xb40 mm/filemap.c:1917
pagecache_get_page+0x2c/0x130 mm/folio-compat.c:87
find_get_page_flags include/linux/pagemap.h:842 [inline]
f2fs_grab_cache_page+0x2b/0x320 fs/f2fs/f2fs.h:2776
__get_node_page+0x131/0x11b0 fs/f2fs/node.c:1463
read_xattr_block+0xfb/0x190 fs/f2fs/xattr.c:306
lookup_all_xattrs fs/f2fs/xattr.c:355 [inline]
f2fs_getxattr+0x676/0xf70 fs/f2fs/xattr.c:533
__f2fs_get_acl+0x52/0x870 fs/f2fs/acl.c:179
f2fs_acl_create fs/f2fs/acl.c:375 [inline]
f2fs_init_acl+0xd7/0x9b0 fs/f2fs/acl.c:418
f2fs_init_inode_metadata+0xa0f/0x1050 fs/f2fs/dir.c:539
f2fs_add_inline_entry+0x448/0x860 fs/f2fs/inline.c:666
f2fs_add_dentry+0xba/0x1e0 fs/f2fs/dir.c:765
f2fs_do_add_link+0x28c/0x3a0 fs/f2fs/dir.c:808
f2fs_add_link fs/f2fs/f2fs.h:3616 [inline]
f2fs_mknod+0x2e8/0x5b0 fs/f2fs/namei.c:766
vfs_mknod+0x36d/0x3b0 fs/namei.c:4191
unix_bind_bsd net/unix/af_unix.c:1286 [inline]
unix_bind+0x563/0xe30 net/unix/af_unix.c:1379
__sys_bind_socket net/socket.c:1817 [inline]
__sys_bind+0x1e4/0x290 net/socket.c:1848
__do_sys_bind net/socket.c:1853 [inline]
__se_sys_bind net/socket.c:1851 [inline]
__x64_sys_bind+0x7a/0x90 net/socket.c:1851
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Let's dump and check metadata of corrupted inode, it shows its xattr_nid
is the same to its i_ino.
dump.f2fs -i 3 chaseyu.img.raw
i_xattr_nid [0x 3 : 3]
So that, during mknod in the corrupted directory, it tries to get and
lock inode page twice, result in deadlock.
- f2fs_mknod
- f2fs_add_inline_entry
- f2fs_get_inode_page --- lock dir's inode page
- f2fs_init_acl
- f2fs_acl_create(dir,..)
- __f2fs_get_acl
- f2fs_getxattr
- lookup_all_xattrs
- __get_node_page --- try to lock dir's inode page
In order to fix this, let's add sanity check on ino and xnid. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Use TOE/TSO on all TCP
It is desireable to push the hardware accelerator to also
process non-segmented TCP frames: we pass the skb->len
to the "TOE/TSO" offloader and it will handle them.
Without this quirk the driver becomes unstable and lock
up and and crash.
I do not know exactly why, but it is probably due to the
TOE (TCP offload engine) feature that is coupled with the
segmentation feature - it is not possible to turn one
part off and not the other, either both TOE and TSO are
active, or neither of them.
Not having the TOE part active seems detrimental, as if
that hardware feature is not really supposed to be turned
off.
The datasheet says:
"Based on packet parsing and TCP connection/NAT table
lookup results, the NetEngine puts the packets
belonging to the same TCP connection to the same queue
for the software to process. The NetEngine puts
incoming packets to the buffer or series of buffers
for a jumbo packet. With this hardware acceleration,
IP/TCP header parsing, checksum validation and
connection lookup are offloaded from the software
processing."
After numerous tests with the hardware locking up after
something between minutes and hours depending on load
using iperf3 I have concluded this is necessary to stabilize
the hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
aoe: clean device rq_list in aoedev_downdev()
An aoe device's rq_list contains accepted block requests that are
waiting to be transmitted to the aoe target. This queue was added as
part of the conversion to blk_mq. However, the queue was not cleaned out
when an aoe device is downed which caused blk_mq_freeze_queue() to sleep
indefinitely waiting for those requests to complete, causing a hang. This
fix cleans out the queue before calling blk_mq_freeze_queue(). |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu().
As syzbot reported [0], mpls_route_input_rcu() can be called
from mpls_getroute(), where is under RTNL.
net->mpls.platform_label is only updated under RTNL.
Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to
silence the splat.
[0]:
WARNING: suspicious RCU usage
6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted
----------------------------
net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.2.4451/17730:
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline]
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961
stack backtrace:
CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865
mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84
mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381
rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964
netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa98/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmmsg+0x200/0x420 net/socket.c:2709
__do_sys_sendmmsg net/socket.c:2736 [inline]
__se_sys_sendmmsg net/socket.c:2733 [inline]
__x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0a2818e969
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969
RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003
RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: add lec_mutex
syzbot found its way in net/atm/lec.c, and found an error path
in lecd_attach() could leave a dangling pointer in dev_lec[].
Add a mutex to protect dev_lecp[] uses from lecd_attach(),
lec_vcc_attach() and lec_mcast_attach().
Following patch will use this mutex for /proc/net/atm/lec.
BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline]
BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142
CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xcd/0x680 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
lecd_attach net/atm/lec.c:751 [inline]
lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 6132:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4328 [inline]
__kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015
alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711
lecd_attach net/atm/lec.c:737 [inline]
lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6132:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x51/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x2b4/0x4d0 mm/slub.c:4842
free_netdev+0x6c5/0x910 net/core/dev.c:11892
lecd_attach net/atm/lec.c:744 [inline]
lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix crash in icl_update_topdown_event()
The perf_fuzzer found a hard-lockup crash on a RaptorLake machine:
Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000
CPU: 23 UID: 0 PID: 0 Comm: swapper/23
Tainted: [W]=WARN
Hardware name: Dell Inc. Precision 9660/0VJ762
RIP: 0010:native_read_pmc+0x7/0x40
Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ...
RSP: 000:fffb03100273de8 EFLAGS: 00010046
....
Call Trace:
<TASK>
icl_update_topdown_event+0x165/0x190
? ktime_get+0x38/0xd0
intel_pmu_read_event+0xf9/0x210
__perf_event_read+0xf9/0x210
CPUs 16-23 are E-core CPUs that don't support the perf metrics feature.
The icl_update_topdown_event() should not be invoked on these CPUs.
It's a regression of commit:
f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read")
The bug introduced by that commit is that the is_topdown_event() function
is mistakenly used to replace the is_topdown_count() call to check if the
topdown functions for the perf metrics feature should be invoked.
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth().
Call Trace:
[ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8
[ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550
[ 97.285732]
[ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11
[ 97.287032] Hardware name: linux,dummy-virt (DT)
[ 97.287815] Call trace:
[ 97.288279] dump_backtrace+0xa0/0x128
[ 97.288946] show_stack+0x20/0x38
[ 97.289551] dump_stack_lvl+0x78/0xc8
[ 97.290203] print_address_description.constprop.0+0x84/0x3c8
[ 97.291159] print_report+0xb0/0x280
[ 97.291792] kasan_report+0x84/0xd0
[ 97.292421] __asan_load8+0x9c/0xc0
[ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8
[ 97.293835] process_fetch_insn+0x770/0xa30
[ 97.294562] kprobe_trace_func+0x254/0x3b0
[ 97.295271] kprobe_dispatcher+0x98/0xe0
[ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210
[ 97.296774] call_break_hook+0xc4/0x100
[ 97.297451] brk_handler+0x24/0x78
[ 97.298073] do_debug_exception+0xac/0x178
[ 97.298785] el1_dbg+0x70/0x90
[ 97.299344] el1h_64_sync_handler+0xcc/0xe8
[ 97.300066] el1h_64_sync+0x78/0x80
[ 97.300699] kernel_clone+0x0/0x500
[ 97.301331] __arm64_sys_clone+0x70/0x90
[ 97.302084] invoke_syscall+0x68/0x198
[ 97.302746] el0_svc_common.constprop.0+0x11c/0x150
[ 97.303569] do_el0_svc+0x38/0x50
[ 97.304164] el0_svc+0x44/0x1d8
[ 97.304749] el0t_64_sync_handler+0x100/0x130
[ 97.305500] el0t_64_sync+0x188/0x190
[ 97.306151]
[ 97.306475] The buggy address belongs to stack of task 1.sh/2550
[ 97.307461] and is located at offset 0 in frame:
[ 97.308257] __se_sys_clone+0x0/0x138
[ 97.308910]
[ 97.309241] This frame has 1 object:
[ 97.309873] [48, 184) 'args'
[ 97.309876]
[ 97.310749] The buggy address belongs to the virtual mapping at
[ 97.310749] [ffff800089270000, ffff800089279000) created by:
[ 97.310749] dup_task_struct+0xc0/0x2e8
[ 97.313347]
[ 97.313674] The buggy address belongs to the physical page:
[ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a
[ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff)
[ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000
[ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 97.319445] page dumped because: kasan: bad access detected
[ 97.320371]
[ 97.320694] Memory state around the buggy address:
[ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00
[ 97.325023] ^
[ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3
[ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
This issue seems to be related to the behavior of some gcc compilers and
was also fixed on the s390 architecture before:
commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")
As described in that commit, regs_get_kernel_stack_nth() has confirmed that
`addr` is on the stack, so reading the value at `*addr` should be allowed.
Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case.
[will: Use '*addr' as the argument to READ_ONCE_NOCHECK()] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pp: Fix potential NULL pointer dereference in atomctrl_initialize_mc_reg_table
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: fix double-free on mc_dev
The blamed commit tried to simplify how the deallocations are done but,
in the process, introduced a double-free on the mc_dev variable.
In case the MC device is a DPRC, a new mc_bus is allocated and the
mc_dev variable is just a reference to one of its fields. In this
circumstance, on the error path only the mc_bus should be freed.
This commit introduces back the following checkpatch warning which is a
false-positive.
WARNING: kfree(NULL) is safe and this check is probably not required
+ if (mc_bus)
+ kfree(mc_bus); |
| Use after free in Password Manager in Google Chrome prior to 143.0.7499.110 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Toolbar in Google Chrome on Android prior to 143.0.7499.110 allowed a remote attacker to perform domain spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
lz4: fix LZ4_decompress_safe_partial read out of bound
When partialDecoding, it is EOF if we've either filled the output buffer
or can't proceed with reading an offset for following match.
In some extreme corner cases when compressed data is suitably corrupted,
UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial
may lead to read out of bound problem during decoding. lz4 upstream has
fixed it [2] and this issue has been disscussed here [3] before.
current decompression routine was ported from lz4 v1.8.3, bumping
lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd
better fix it first.
[1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/
[2] https://github.com/lz4/lz4/commit/c5d6f8a8be3927c0bec91bcc58667a6cfad244ad#
[3] https://lore.kernel.org/all/CC666AE8-4CA4-4951-B6FB-A2EFDE3AC03B@fb.com/ |
| Dependency on Vulnerable Third-Party Component (CWE-1395) in the PostgreSQL backend in AxxonSoft Axxon One (C-Werk) 2.0.8 and earlier on Windows and Linux allows a remote attacker to escalate privileges, execute arbitrary code, or cause denial-of-service via exploitation of multiple known CVEs present in PostgreSQL v10.x, which are resolved in PostgreSQL 17.4. |
| Missing Encryption of Sensitive Data (CWE-311) in the Object Archive component in AxxonSoft Axxon One (C-Werk) before 2.0.8 on Windows and Linux allows a local attacker with access to exported storage or stolen physical drives to extract sensitive archive data in plaintext via lack of encryption at rest. |
