| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: Do not crash on missing msc->input
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-pl: handle probe errors
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used. |
| In the Linux kernel, the following vulnerability has been resolved:
net: use skb_header_pointer() for TCPv4 GSO frag_off check
Syzbot reported a KMSAN uninit-value warning in gso_features_check()
called from netif_skb_features() [1].
gso_features_check() reads iph->frag_off to decide whether to clear
mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr()
can rely on skb header offsets that are not always safe for direct
dereference on packets injected from PF_PACKET paths.
Use skb_header_pointer() for the TCPv4 frag_off check so the header read
is robust whether data is already linear or needs copying.
[1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: lag: Check for LAG device before creating debugfs
__mlx5_lag_dev_add_mdev() may return 0 (success) even when an error
occurs that is handled gracefully. Consequently, the initialization
flow proceeds to call mlx5_ldev_add_debugfs() even when there is no
valid LAG context.
mlx5_ldev_add_debugfs() blindly created the debugfs directory and
attributes. This exposed interfaces (like the members file) that rely on
a valid ldev pointer, leading to potential NULL pointer dereferences if
accessed when ldev is NULL.
Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer
before attempting to create the debugfs entries. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure. `dev->iobase`
may still be set to its initial value of 0, which would result in
undesired writes to low I/O port addresses. `dev->private` may still be
`NULL`, which would result in null pointer dereferences.
Fix `atmio16d_detach()` by checking that `dev->private` is valid
(non-null) before calling `reset_atmio16d()`. This implies that
`dev->iobase` was set correctly since that is set up before
`dev->private`. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/mc: Fix error path ordering in edac_mc_alloc()
When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path
will call put_device() which will end up calling the device's release
function.
However, the init ordering is wrong such that device_initialize() happens
*after* the failed allocation and thus the device itself and the release
function pointer are not initialized yet when they're called:
MCE: In-kernel MCE decoding enabled.
------------[ cut here ]------------
kobject: '(null)': is not initialized, yet kobject_put() is being called.
WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd
CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full)
RIP: 0010:kobject_put
Call Trace:
<TASK>
edac_mc_alloc+0xbe/0xe0 [edac_core]
amd64_edac_init+0x7a4/0xff0 [amd64_edac]
? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac]
do_one_initcall
...
Reorder the calling sequence so that the device is initialized and thus the
release function pointer is properly set before it can be used.
This was found by Claude while reviewing another EDAC patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Check set_default_submission() before deferencing
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 23.342038] serial 00:05: disabled
[ 23.345719] serial 00:02: disabled
[ 23.349342] serial 00:01: disabled
[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 23.361635] ata1.00: Entering standby power mode
[ 23.368863] ata2.00: Entering standby power mode
[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 23.452194] #PF: supervisor instruction fetch in kernel mode
[ 23.457896] #PF: error_code(0x0010) - not-present page
[ 23.463065] PGD 0 P4D 0
[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI
[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)
[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 23.496511] Workqueue: async async_run_entry_fn
[ 23.501087] RIP: 0010:0x0
[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246
[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f
[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000
[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff
[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8
[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68
[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000
[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0
[ 23.572539] PKRU: 55555554
[ 23.575281] Call Trace:
[ 23.577770] <TASK>
[ 23.579905] intel_engines_reset_default_submission+0x42/0x60
[ 23.585695] __intel_gt_unset_wedged+0x191/0x200
[ 23.590360] intel_gt_unset_wedged+0x20/0x40
[ 23.594675] gt_sanitize+0x15e/0x170
[ 23.598290] i915_gem_suspend_late+0x6b/0x180
[ 23.602692] i915_drm_suspend_late+0x35/0xf0
[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10
[ 23.611843] dpm_run_callback+0x78/0x1c0
[ 23.615817] device_suspend_late+0xde/0x2e0
[ 23.620037] async_suspend_late+0x18/0x30
[ 23.624082] async_run_entry_fn+0x25/0xa0
[ 23.628129] process_one_work+0x15b/0x380
[ 23.632182] worker_thread+0x2a5/0x3c0
[ 23.635973] ? __pfx_worker_thread+0x10/0x10
[ 23.640279] kthread+0xf6/0x1f0
[ 23.643464] ? __pfx_kthread+0x10/0x10
[ 23.647263] ? __pfx_kthread+0x10/0x10
[ 23.651045] ret_from_fork+0x131/0x190
[ 23.654837] ? __pfx_kthread+0x10/0x10
[ 23.658634] ret_from_fork_asm+0x1a/0x30
[ 23.662597] </TASK>
[ 23.664826] Modules linked in:
[ 23.667914] CR2: 0000000000000000
[ 23.671271] ------------[ cut here ]------------
(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad) |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. Then, if neigh_suppress is enabled and an ICMPv6
Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will
dereference ipv6_stub->nd_tbl which is NULL, passing it to
neigh_lookup(). This causes a kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000268
Oops: 0000 [#1] PREEMPT SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x16/0xe0
[...]
Call Trace:
<IRQ>
? neigh_lookup+0x16/0xe0
br_do_suppress_nd+0x160/0x290 [bridge]
br_handle_frame_finish+0x500/0x620 [bridge]
br_handle_frame+0x353/0x440 [bridge]
__netif_receive_skb_core.constprop.0+0x298/0x1110
__netif_receive_skb_one_core+0x3d/0xa0
process_backlog+0xa0/0x140
__napi_poll+0x2c/0x170
net_rx_action+0x2c4/0x3a0
handle_softirqs+0xd0/0x270
do_softirq+0x3f/0x60
Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in
the callers. This is in essence disabling NS/NA suppression when IPv6 is
disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: radiotap: reject radiotap with unknown bits
The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present. |
| VB-Audio Voicemeeter, Voicemeeter Banana, and Voicemeeter Potato (versions ending in 1.1.1.9, 2.1.1.9, and 3.1.1.9 and earlier, respectively), as well as VB-Audio Matrix and Matrix Coconut (versions ending in 1.0.2.2 and 2.0.2.2 and earlier, respectively), contain a vulnerability in their virtual audio drivers (vbvoicemeetervaio64*.sys, vbmatrixvaio64*.sys, vbaudio_vmauxvaio*.sys, vbaudio_vmvaio*.sys, and vbaudio_vmvaio3*.sys). When a handle is opened with a special file attribute value, the drivers improperly initialize FILE_OBJECT->FsContext to a non-pointer magic value. If subsequent operations are not handled by the VB-Audio driver and are forwarded down the audio driver stack (e.g., via PortCls to ks.sys), the invalid FsContext value can be dereferenced, causing a kernel crash (BSoD), typically SYSTEM_SERVICE_EXCEPTION with STATUS_ACCESS_VIOLATION. This flaw allows a local unprivileged user to trigger a denial-of-service on affected Windows systems. |
| An uninitialized pointer dereference in the NasPdu::NasPdu component of OpenAirInterface CN5G AMF up to v2.0.0 allows attackers to cause a Denial of Service (DoS) via a crafted InitialUEMessage message sent to the AMF. |
| BPv7 dissector crash in Wireshark 4.6.0 allows denial of service |
| An Access of Uninitialized Pointer vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved with BGP sharding configured allows an attacker triggering indirect next-hop updates, along with timing outside the attacker's control, to cause rpd to crash and restart, leading to a Denial of Service (DoS).
With BGP sharding enabled, triggering route resolution of an indirect next-hop (e.g., an IGP route change over which a BGP route gets resolved), may cause rpd to crash and restart. An attacker causing continuous IGP route churn, resulting in repeated route re-resolution, will increase the likelihood of triggering this issue, leading to a potentially extended DoS condition.
This issue affects:
Junos OS:
* all versions before 21.4R3-S6,
* from 22.1 before 22.1R3-S6,
* from 22.2 before 22.2R3-S3,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3,
* from 23.2 before 23.2R2;
Junos OS Evolved:
* all versions before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-EVO,
* from 23.2 before 23.2R2-EVO.
Versions before Junos OS 21.3R1 and Junos OS Evolved 21.3R1-EVO are unaffected by this issue. |
| No description is available for this CVE. |
| InDesign Desktop versions 21.0, 19.5.5 and earlier are affected by an Access of Uninitialized Pointer vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| InDesign Desktop versions 21.0, 19.5.5 and earlier are affected by an Access of Uninitialized Pointer vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit
Syzbot points out that skb_trim() has a sanity check on the existing length of
the skb, which can be uninitialised in some error paths. The intent here is
clearly just to reset the length to zero before resubmitting, so switch to
calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length()
already contains a call to skb_reset_tail_pointer(), so remove the redundant
call.
The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar
usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. |
| In the Linux kernel, the following vulnerability has been resolved:
um: line: always fill *error_out in setup_one_line()
The pointer isn't initialized by callers, but I have
encountered cases where it's still printed; initialize
it in all possible cases in setup_one_line(). |
| In AzeoTech DAQFactory release 20.7 (Build 2555), an Access of Uninitialized Pointer vulnerability can be exploited by an attacker which can lead to arbitrary code execution. |
