| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound
Transport drivers (such as rmi_i2c and rmi_spi) invoke
rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev
device during system power management events. However, transport drivers
are fully registered and operational even if the physical RMI driver
failed to bind or probe the rmi_dev device.
When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound
rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or
rmi_enable_irq() without driver data attached causes a NULL pointer
dereference and General Protection Fault when attempting to lock
data->enabled_mutex.
Fix this by checking if driver data is attached to rmi_dev in
rmi_driver_suspend() and rmi_driver_resume(), exiting early if
no driver data is present. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - zero absinfo before partial copy in EVIOCSABS
The EVIOCSABS handler copies at most the user supplied ioctl size into
an uninitialized on-stack struct input_absinfo:
if (copy_from_user(&abs, p, min_t(size_t,
size, sizeof(struct input_absinfo))))
The size comes from _IOC_SIZE() of the ioctl command and is therefore
fully controlled by userspace. A short size leaves the trailing part of
the structure holding whatever was on the kernel stack, and the whole
structure is then stored into the device:
dev->absinfo[t] = abs;
EVIOCGABS hands that back to userspace, disclosing the stale stack
bytes. Only the resolution field is currently cleared, which covers the
legacy struct layout but not an arbitrarily short size.
Zero the structure before the copy so any part not supplied by the
caller reads back as zero. The existing resolution fixup is kept, since
it also handles a size that partially overlaps that field. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cyttsp5 - clamp the HID report size before memcpy
The size field comes from the device and is used as the memcpy()
length into response_buf, which is CY_MAX_INPUT bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()
scsi_cdl_enable() uses length fields returned by MODE SENSE to locate
the ATA feature mode page in a 64-byte stack buffer. A target can report
a total length shorter than its mode header and block descriptors. The
unsigned subtraction used for the MODE SELECT length can wrap, and the
separately computed buf_data can point beyond buf.
During automatic scan, enable is false, so the read-modify-write of
buf_data[4] can clear the low two bits of a target-selected
out-of-bounds stack byte. scsi_mode_select() can then copy up to 64
bytes from outside the buffer into the outgoing MODE SELECT payload,
disclosing stack contents to the target.
This is reachable while scanning a USB storage device that identifies as
an ATA device and advertises CDL support. No filesystem mount or
userspace access to the block device is required.
On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific,
one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator
sampling executed a fixed proof command inside the guest and created a
UID-0-owned marker during automatic enumeration, with KASLR and NX
enabled.
The issue was independently found during security research at Drivesec
S.r.l.
Cap the available length to the buffer size. Validate and consume the
mode header and block descriptor lengths before using the page, and
require the five bytes needed to access the CDL field. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: Fix silent overflow for phys vec to sgt
In case MMIO size is bigger than 4G and peer2peer DMA goes
through host bridge, we trigger a code path that assigns the
total linked IOVA (which is greater than 4G) to mapped_len.
Previously, `mapped_len` was declared as 32-bit `unsigned int`.
When accumulating `size_t` lengths, this leads to a silent wrap-around.
This truncation causes truncated lengths to be passed to functions
like `fill_sg_entry()`.
Fix this by changing `mapped_len` to `size_t` (64-bit). While
at it, fix similar potential overflow issues in `calc_sg_nents`
by using `check_add_overflow()` for `nents` and using
`unsigned int` for the loop iterator in `fill_sg_entry` to match. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: only group hidden BSSes with beacon entries
When a probe response for an unknown BSS comes in, __cfg80211_bss_update()
looks for an existing entry with the same BSSID and a hidden (zero-length
or NUL-filled) SSID, and if it finds one it groups them, using the beacon
IEs from the existing entry.
But that could find another entry without a beacon, if it was also from a
probe response (with SSID), so there's a group without beacon elements.
If a beacon with a hidden SSID for that BSSID arrives later,
cfg80211_combine_bsses() goes looking for the probe response entries that
belong to it - i.e. entries with the same BSSID and channel that have no
beacon IEs - and finds those two. They are already grouped with each
other, so it hits its
WARN_ON_ONCE(bss->pub.hidden_beacon_bss)
WARN_ON_ONCE(!list_empty(&bss->hidden_list))
which are there because an entry without beacon elements is not supposed
to be part of a group yet.
Only combine entries when a beacon was already received, ones that are
kept separate will be combined when a beacon arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: pass PMKID to firmware if present
Zero out auth_status on initialization. Otherwise, garbage will
leak from the stack to the firmware (when ssid is less than 32 bytes
and/or when params->pmkid is set). Then, pass the params->pmkid to the
firmware (without it, the firmware caches a garbage PMKID on successful
authentication and denies a subsequent association request that includes
the PMKID). |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 IBM DataStage could allow a remote authenticated attacker to read, write, or delete arbitrary files due to a path traversal vulnerability. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 IBM DataStage could allow a remote authenticated attacker to perform an arbitrary file write due to improper validation of file paths. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Information disclosure and Information tampering. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 IBM DataStage could allow a remote authenticated attacker to execute arbitrary code due to improper configuration of the XSLT transformation engine. |
| Payload is a free and open source headless content management system. In @payloadcms/plugin-mcp versions from 3.61.0 until 3.88.0, an authenticated user can manage MCP API keys outside the intended account, enabling privilege escalation through account takeover. This issue is fixed in version 3.88.0. |
| Memory corruption while processing a crafted ELF file in the Primary Bootloader. |
| Exposed dangerous function lead to privilege escalation via gRPC server. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's ext_authz filter assumes that a request contains a :path pseudoheader when applying query_parameters_to_set or query_parameters_to_remove from an authorization response. A path-less CONNECT request makes request_headers_->Path() return null, and Filter::onComplete dereferences that pointer while parsing the query string. An unauthenticated downstream client can crash the Envoy process when the filter and authorization response use query-parameter mutation. The relevant scope boundary is that the deployment must accept path-less CONNECT and configure ext_authz query-parameter mutation. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 IBM DataStage PxXMLInput operator could allow a remote authenticated attacker to obtain sensitive information due to an XML external entity (XXE) injection. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 IBM DataStage could allow a remote authenticated attacker to execute arbitrary commands due to os command injection. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 IBM DataStage could allow a remote authenticated attacker to execute arbitrary OS commands due to improper neutralization of special characters in the PxPeek name property. |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. Prior to 2.4.1, a user who only has permission to create ExternalSecret resources can cause the operator to create a Secret that Kubernetes will automatically populate with a long-lived token for the specified service account. This effectively allows the user to impersonate any service account in the namespace without needing direct create permissions on TokenRequest or Secrets of that type. This vulnerability is fixed in 2.4.1. |
