| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→ snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime).
No synchronization prevents kfree(runtime) from completing while the
drain path dereferences the stale pointer.
Fix by caching the needed runtime fields (no_period_wakeup, rate,
buffer_size) into local variables while still holding the stream lock,
and using the cached values after the lock is released. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: hold tty->link reference in ldisc_open and ser_release
A reproducer triggers a KASAN slab-use-after-free in pty_write_room()
when caif_serial's TX path calls tty_write_room(). The faulting access
is on tty->link->port.
Hold an extra kref on tty->link for the lifetime of the caif_serial line
discipline: get it in ldisc_open() and drop it in ser_release(), and
also drop it on the ldisc_open() error path.
With this change applied, the reproducer no longer triggers the UAF in
my testing. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: soc-core: flush delayed work before removing DAIs and widgets
When a sound card is unbound while a PCM stream is open, a
use-after-free can occur in snd_soc_dapm_stream_event(), called from
the close_delayed_work workqueue handler.
During unbind, snd_soc_unbind_card() flushes delayed work and then
calls soc_cleanup_card_resources(). Inside cleanup,
snd_card_disconnect_sync() releases all PCM file descriptors, and
the resulting PCM close path can call snd_soc_dapm_stream_stop()
which schedules new delayed work with a pmdown_time timer delay.
Since this happens after the flush in snd_soc_unbind_card(), the
new work is not caught. soc_remove_link_components() then frees
DAPM widgets before this work fires, leading to the use-after-free.
The existing flush in soc_free_pcm_runtime() also cannot help as it
runs after soc_remove_link_components() has already freed the widgets.
Add a flush in soc_cleanup_card_resources() after
snd_card_disconnect_sync() (after which no new PCM closes can
schedule further delayed work) and before soc_remove_link_dais()
and soc_remove_link_components() (which tear down the structures the
delayed work accesses). |
| Undefined behavior may result due to a race condition leading to a use-after-free violation. If BIND receives an incoming DNS message signed with SIG(0), it begins work to validate that signature. If, during that validation, the "recursive-clients" limit is reached (as would occur during a query flood), and that same DNS message is discarded per the limit, there is a brief window of time while the SIG(0) validation may attempt to read the now-discarded DNS message.
This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1.
BIND 9 versions 9.18.28 through 9.18.49 and 9.18.28-S1 through 9.18.49-S1 are NOT affected. |
| A use-after-free vulnerability exists within the DNS-over-HTTPS implementation.
This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1.
BIND 9 versions 9.18.0 through 9.18.48 and 9.18.11-S1 through 9.18.48-S1 are NOT affected. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: make hash table per queue
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure. |
| NLnet Labs Unbound 1.19.1 up to and including version 1.25.0 has a vulnerability in the DNSSEC validator that enables denial of service and possible remote code execution as a result of deep copying a data structure and erroneously overwriting a destination pointer. An adversary can exploit the vulnerability by controlling a malicious signed zone and querying a vulnerable Unbound. When DS sub-queries need to suspend validation due to NSEC3 computational budget exhaustion (introduced in Unbound 1.19.1), Unbound deep-copies response messages to preserve them across memory region teardown. A struct-assignment bug overwrites the destination's pointer with the source's pointer. After the sub-query region is freed, the resumed validator dereferences this dangling pointer, triggering a crash or potentially enabling arbitrary code execution. Unbound 1.25.1 contains a patch with a fix to preserve the correct pointer when deep copying the data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: fix use-after-free in ISR during device removal
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix use-after-free in smb2_open()
The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is
dereferenced after rcu_read_unlock(), creating a use-after-free
window. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user
After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in
hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to
conn->users. However, l2cap_register_user() and l2cap_unregister_user()
don't use conn->lock, creating a race condition where these functions can
access conn->users and conn->hchan concurrently with l2cap_conn_del().
This can lead to use-after-free and list corruption bugs, as reported
by syzbot.
Fix this by changing l2cap_register_user() and l2cap_unregister_user()
to use conn->lock instead of hci_dev_lock(), ensuring consistent locking
for the l2cap_conn structure. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: Fix possible UAF
This fixes the following trace caused by not dropping l2cap_conn
reference when user->remove callback is called:
[ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00
[ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 97.809947] Call Trace:
[ 97.809954] <TASK>
[ 97.809961] dump_stack_lvl (lib/dump_stack.c:122)
[ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798)
[ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1))
[ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341)
[ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2))
[ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360)
[ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285)
[ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5))
[ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716)
[ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691)
[ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678)
[ 97.810404] __fput (fs/file_table.c:470)
[ 97.810430] task_work_run (kernel/task_work.c:235)
[ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201)
[ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5))
[ 97.810527] do_exit (kernel/exit.c:972)
[ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810574] ? __pfx_do_exit (kernel/exit.c:897)
[ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 97.810721] do_group_exit (kernel/exit.c:1093)
[ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1))
[ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366)
[ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810826] ? vfs_read (fs/read_write.c:555)
[ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800)
[ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555)
[ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810960] arch_do_signal_or_restart (arch/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix use-after-free on controller registration failure
Make sure to deregister from driver core also in the unlikely event that
per-cpu statistics allocation fails during controller registration to
avoid use-after-free (of driver resources) and unclocked register
accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix use-after-free access to PTP clock
PTP clock is registered on every opening of the interface and destroyed on
every closing. However it may be accessed via get_ts_info ethtool call
which is possible while the interface is just present in the kernel.
BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
Read of size 4 at addr ffff8880194345cc by task syz.0.6/948
CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
print_address_description mm/kasan/report.c:316 [inline]
print_report+0x17f/0x496 mm/kasan/report.c:420
kasan_report+0xd9/0x180 mm/kasan/report.c:524
ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349
macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371
__ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558
ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline]
__dev_ethtool net/ethtool/ioctl.c:3017 [inline]
dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 457:
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:699 [inline]
ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235
gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375
macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920
__dev_open+0x2ce/0x500 net/core/dev.c:1501
__dev_change_flags+0x56a/0x740 net/core/dev.c:8651
dev_change_flags+0x92/0x170 net/core/dev.c:8722
do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833
__rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608
rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655
rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150
netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x14b/0x180 net/socket.c:730
__sys_sendto+0x320/0x3b0 net/socket.c:2152
__do_sys_sendto net/socket.c:2164 [inline]
__se_sys_sendto net/socket.c:2160 [inline]
__x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 938:
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1729 [inline]
slab_free_freelist_hook mm/slub.c:1755 [inline]
slab_free mm/slub.c:3687 [inline]
__kmem_cache_free+0xbc/0x320 mm/slub.c:3700
device_release+0xa0/0x240 drivers/base/core.c:2507
kobject_cleanup lib/kobject.c:681 [inline]
kobject_release lib/kobject.c:712 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1cd/0x350 lib/kobject.c:729
put_device+0x1b/0x30 drivers/base/core.c:3805
ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391
gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404
macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966
__dev_close_many+0x1b9/0x310 net/core/dev.c:1585
__dev_close net/core/dev.c:1597 [inline]
__dev_change_flags+0x2bb/0x740 net/core/dev.c:8649
dev_change_fl
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/bus: Fix potential use after free in asynchronous initialization
Dingisoul with KASAN reports a use after free if device_add() fails in
nd_async_device_register().
Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while
scheduling async init") correctly added a reference on the parent device
to be held until asynchronous initialization was complete. However, if
device_add() results in an allocation failure the ref count of the
device drops to 0 prior to the parent pointer being accessed. Thus
resulting in use after free.
The bug bot AI correctly identified the fix. Save a reference to the
parent pointer to be used to drop the parent reference regardless of the
outcome of device_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close()
opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being
accessed after rcu_read_unlock() has been called. This creates a
race condition where the memory could be freed by a concurrent
writer between the unlock and the subsequent pointer dereferences
(opinfo->is_lease, etc.), leading to a use-after-free. |
