| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: radiotap: reject radiotap with unknown bits
The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_CT: drop pending enqueued packets on template removal
Templates refer to objects that can go away while packets are sitting in
nfqueue refer to:
- helper, this can be an issue on module removal.
- timeout policy, nfnetlink_cttimeout might remove it.
The use of templates with zone and event cache filter are safe, since
this just copies values.
Flush these enqueued packets in case the template rule gets removed. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: rawsock: cancel tx_work before socket teardown
In rawsock_release(), cancel any pending tx_work and purge the write
queue before orphaning the socket. rawsock_tx_work runs on the system
workqueue and calls nfc_data_exchange which dereferences the NCI
device. Without synchronization, tx_work can race with socket and
device teardown when a process is killed (e.g. by SIGKILL), leading
to use-after-free or leaked references.
Set SEND_SHUTDOWN first so that if tx_work is already running it will
see the flag and skip transmitting, then use cancel_work_sync to wait
for any in-progress execution to finish, and finally purge any
remaining queued skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: restrict usage in unprivileged domU
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
---
V2:
- defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich)
- wait in open() if target domain isn't known yet
- issue message in case no target domain found (Jan Beulich) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: handle short interrupt urb messages properly
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: etas_es58x: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: aqc111: Do not perform PM inside suspend callback
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants |
| follow-redirects is an open source, drop-in replacement for Node's `http` and `https` modules that automatically follows redirects. Prior to 1.16.0, when an HTTP request follows a cross-domain redirect (301/302/307/308), follow-redirects only strips authorization, proxy-authorization, and cookie headers (matched by regex at index.js). Any custom authentication header (e.g., X-API-Key, X-Auth-Token, Api-Key, Token) is forwarded verbatim to the redirect target. This vulnerability is fixed in 1.16.0. |
| The GdkPixbufLoader function in GIMP ToolKit (GTK+) in GTK 2 (gtk2) before 2.4.13 allows context-dependent attackers to cause a denial of service (crash) via a malformed image file. |
| Unspecified vulnerability in Microsoft Windows 2000 SP4 through Vista allows remote attackers to execute arbitrary code or cause a denial of service (persistent reboot) via a malformed ANI file, which results in memory corruption when processing cursors, animated cursors, and icons, a similar issue to CVE-2005-0416, as originally demonstrated using Internet Explorer 6 and 7. NOTE: this issue might be a duplicate of CVE-2007-0038; if so, then use CVE-2007-0038 instead of this identifier. |
| Unspecified vulnerability in the Oracle Secure Backup component in Oracle Secure Backup 10.2.0.2 allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors, a different vulnerability than CVE-2008-5444 and CVE-2008-5449. |
| Yana Framework before 2.8.5a allows remote authenticated users with permissions to modify a guestbook profile to modify or delete arbitrary guestbook profiles via unspecified vectors. NOTE: The provenance of this information is unknown; the details are obtained solely from third party information. |
| Unspecified vulnerability in Microsoft Word allows user-assisted remote attackers to execute arbitrary code on Word 2000, and cause a denial of service on Word 2003, via unknown attack vectors that trigger memory corruption, as exploited by Trojan.Mdropper.W and later by Trojan.Mdropper.X, a different issue than CVE-2006-6456, CVE-2006-5994, and CVE-2006-6561. |
| Unspecified vulnerability in Classifieds (com_classifieds) component 1.3 and earlier for Joomla! has unspecified impact and attack vectors. |
| Multiple PHP remote file inclusion vulnerabilities in the Joomlaboard Forum Component (com_joomlaboard) before 1.1.2 for Joomla! allow remote attackers to execute arbitrary PHP code via a URL in the sbp parameter to (1) file_upload.php or (2) image_upload.php, a variant of CVE-2006-3528. |
| The TabStrip ActiveX control in the Common Controls in MSCOMCTL.OCX in Microsoft Office 2003 SP3, Office 2003 Web Components SP3, Office 2007 SP2 and SP3, Office 2010 SP1, SQL Server 2000 SP4, SQL Server 2005 SP4, SQL Server 2008 SP2, SP3, R2, R2 SP1, and R2 SP2, Commerce Server 2002 SP4, Commerce Server 2007 SP2, Commerce Server 2009 Gold and R2, Host Integration Server 2004 SP1, Visual FoxPro 8.0 SP1, Visual FoxPro 9.0 SP2, and Visual Basic 6.0 Runtime allows remote attackers to execute arbitrary code via a crafted (1) document or (2) web page that triggers system-state corruption, aka "MSCOMCTL.OCX RCE Vulnerability." |
