| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper authentication in Azure SQL Database allows an unauthorized attacker to elevate privileges over a network. |
| An authentication bypass vulnerability exists in the OAuth2 TokenIntrospectionService in Apache CXF. Due to a missing 'throw' keyword in the security context check, the introspection endpoint (/services/oauth2/introspect) can be accessed by any unauthenticated network attacker. However note that this is a safeguard only in the case that someone forgot to enable authentication on the service. Users are recommended to upgrade to version 4.2.2 or 4.1.7 or 3.6.12, which fixes this issue. |
| Improper authentication in Microsoft Teams allows an authorized attacker to elevate privileges over a network. |
| A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: tcp: ipv4, fix incorrect labeling
Currently, Smack mirrors the label of incoming tcp/ipv4 connections:
when a label 'foo' connects to a label 'bar' with tcp/ipv4,
'foo' always gets 'foo' in returned ipv4 packets. So,
1) returned packets are incorrectly labeled ('foo' instead of 'bar')
2) 'bar' can write to 'foo' without being authorized to write.
Here is a scenario how to see this:
* Take two machines, let's call them C and S,
with active Smack in the default state
(no settings, no rules, no labeled hosts, only builtin labels)
* At S, add Smack rule 'foo bar w'
(labels 'foo' and 'bar' are instantiated at S at this moment)
* At S, at label 'bar', launch a program
that listens for incoming tcp/ipv4 connections
* From C, at label 'foo', connect to the listener at S.
(label 'foo' is instantiated at C at this moment)
Connection succeedes and works.
* Send some data in both directions.
* Collect network traffic of this connection.
All packets in both directions are labeled with the CIPSO
of the label 'foo'. Hence, label 'bar' writes to 'foo' without
being authorized, and even without ever being known at C.
If anybody cares: exactly the same happens with DCCP.
This behavior 1st manifested in release 2.6.29.4 (see Fixes below)
and it looks unintentional. At least, no explanation was provided.
I changed returned packes label into the 'bar',
to bring it into line with the Smack documentation claims. |
| Qinglong is a timed task management platform supporting Python3, JavaScript, Shell, and Typescript. Prior to 2.20.1, the init guard middleware in back/loaders/express.ts checks /api/user/init but not /open/user/init, while rewrite('/open/*', '/api/$1') rewrites the whitelisted /open/* path after JWT authentication and the guard have passed; an unauthenticated attacker can send PUT /open/user/init to reset administrator credentials on an initialized instance. This issue is fixed in 2.20.1. |
| X509AuthenticationProvider could issue a fully authenticated X509AuthenticationToken when a presented certificate mapped to UserDetails, without applying Spring Security's standard account lifecycle checks (disabled, locked, expired, or credentials-expired accounts).
Affected versions:
Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8. |
| ARM mbed TLS before 1.3.21 and 2.x before 2.1.9, if optional authentication is configured, allows remote attackers to bypass peer authentication via an X.509 certificate chain with many intermediates. NOTE: although mbed TLS was formerly known as PolarSSL, the releases shipped with the PolarSSL name are not affected. |
| An authentication bypass by capture-replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download. |
| Echelon SmartServer 1 all versions, SmartServer 2 all versions prior to release 4.11.007, i.LON 100 all versions, and i.LON 600 all versions. An attacker can bypass the required authentication specified in the security configuration file by including extra characters in the directory name when specifying the directory to be accessed. This vulnerability does not affect the i.LON 600 product. |
| An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. Firmware can be updated over the network without authentication, which may allow remote code execution. |
| An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. Administration passwords can be retried without authenticating. |
| The shared memory manager (associated with pre-authentication compression) in sshd in OpenSSH before 7.4 does not ensure that a bounds check is enforced by all compilers, which might allows local users to gain privileges by leveraging access to a sandboxed privilege-separation process, related to the m_zback and m_zlib data structures. |
| Incorrect implementation of an authentication algorithm in Ivanti vTM other than versions 22.2R1 or 22.7R2 allows a remote unauthenticated attacker to bypass authentication of the admin panel. |
| T-Com Speedport 500V routers with firmware 1.31 allow remote attackers to bypass authentication and reconfigure the device via a LOGINKEY=TECOM cookie value. |
| Horilla is a free and open source Human Resource Management System (HRMS). In version 1.4.0, the OTP handling logic has a flawed equality check that can be bypassed. When an OTP expires, the server returns None, and if an attacker omits the otp field from their POST request, the user-supplied OTP is also None, causing the comparison user_otp == otp to pass. This allows an attacker to bypass two-factor authentication entirely without ever providing a valid OTP. If administrative accounts are targeted, it could lead to compromise of sensitive HR data, manipulation of employee records, and further system-wide abuse. This issue has been fixed in version 1.5.0. |
| The MetForm – Contact Form, Survey, Quiz, & Custom Form Builder for Elementor plugin for WordPress is vulnerable to Sensitive Information Exposure in versions up to, and including, 4.1.0. This is due to the use of a forgeable cookie value derived only from the entry ID and current user ID without a server-side secret. This makes it possible for unauthenticated attackers to access form submission entry data via MetForm shortcodes for entries created within the transient TTL (default is 15 minutes). |
| A vulnerability classified as problematic has been found in 70mai 1S up to 20250611. This affects an unknown part of the component Video Services. The manipulation leads to improper authentication. Access to the local network is required for this attack to succeed. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Alteryx Server. Affected by this issue is some unknown functionality of the file /gallery/api/status/. Performing manipulation results in improper authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 2023.1.1.13.486, 2023.2.1.10.293, 2024.1.1.9.236, 2024.2.1.6.125 and 2025.1.1.1.31 can resolve this issue. Upgrading the affected component is recommended. |
| CIE.AspNetCore.Authentication is an AspNetCore Remote Authenticator for CIE 3.0. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: 1. Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; 2. Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The library cie-aspnetcore refers to the second entity, the SP, and implements the validation logic of SAML assertions within SAML responses. In affected versions there is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This issue has been addressed in version 2.1.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
