| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: folio_put() after error
dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of
kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator
corruption.
While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF
by future callers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow
The 0xffff length sentinel detects a router reboot and schedules
re-enabling of ethernet mode, but then falls through to the rest
of the loop body. The next check is
} else if (len > CX82310_MTU) {
which is the else of the just-matched if -- it never fires for
len == 0xffff. The MTU bound that normally caps the
incomplete-packet save path is silently bypassed.
With 0xffff > skb->len always true (rx_urb_size is 4096), the
incomplete-packet branch saves dev->partial_len = skb->len bytes
into dev->partial_data. partial_data is kmalloc(hard_mtu) =
kmalloc(CX82310_MTU + 2) = 1516 bytes, but skb->len after the
2-byte header pull can be up to 4094. A device that sends a
4096-byte URB starting with [0xff 0xff] therefore copies 4094
device-provided bytes into a buffer allocated for 1516 bytes,
exceeding its requested size by 2578 bytes.
The next URB then reads dev->partial_len (4094) back from the same
1516-byte buffer and dev->partial_rem (65535 - 4094 = 61441) from
the new URB's ~4KB skb, both well past their allocations, and
delivers the spliced result as a 64KB "frame" to the network
stack.
Bail out of rx_fixup after scheduling the re-enable work; the
remainder of a reboot-marker URB is not meaningful packet data.
This restores the invariant that partial_len < CX82310_MTU + 2 on
the save path, since every other route there has already passed
the MTU check. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: properly convert mglist to rcu
Sashiko reported a bug [1] that br_multicast_del_port_group unlists the
port group not using proper rcu helper that preserves the next pointer and
after that immediately frees the port group without waiting for rcu grace
period. The only rcu walker of mglist is br_multicast_list_adjacent() and
it turns out that function has always been buggy because mglist was never
properly converted to RCU. Fix it by converting it to rcu and moving its
initialization after eth_addr's. Initializing p->next can use
RCU_INIT_POINTER because we have a barrier from the hlist_add_head_rcu call
later, besides we're initializing an unpublished structure anyway.
[1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260826014200.362304-1-littleddfu%40gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix unbalanced module reference count
strace_open() invokes try_module_get() which on success takes
the module reference. If any follow up operation causes
strace_open() to fail, the refcount shall be put down. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
Sashiko reported that the code was using meta->nr_subbufs without making
sure that it matched the nr_pages + 1 on data that was assuming the two
were the same.
Add a check to the persistent ring buffer validation code to make sure
that the saved nr_subbufs matches what we expect. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark sched_process_wait argument as nullable
do_wait() passes wo->wo_pid to the sched_process_wait tracepoint.
kernel_wait4() leaves wo_pid NULL for wait4(-1), and
kernel_waitid_prepare() does likewise for waitid(P_ALL).
btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID |
PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked
dereference. Trusted pointer loads have no fault protection, so a wait for
any child can then cause a NULL pointer dereference in JITed BPF code.
Add sched_process_wait to raw_tp_null_args[] with argument 0 marked
nullable. The verifier rejects an unchecked dereference while preserving
access after the program checks the pointer for NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark signal tracepoint siginfo arguments as scalar
The signal_generate and signal_deliver tracepoints declare their info
argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore
treats it as a trusted pointer for tp_btf programs.
Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special
values for this argument. Those values are zero and one respectively,
and are not pointers. A tp_btf program can currently dereference either
value and fault the kernel. In particular, signal_generate can run from
timer interrupt context, turning the fault into a kernel panic.
Record both tracepoints in raw_tp_null_args[] and mark argument one as
a non-pointer. This preserves scalar access to the cookie while rejecting
direct and helper-mediated pointer use. Merely marking it nullable would
not suffice because SEND_SIG_PRIV is nonzero. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref in btf_var_show()
btf_var_show() calls btf_type_id_resolve() unconditionally, which
dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the
vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is
not resolved during parsing. btf_modifier_show() guards this with
'if (btf->resolved_ids)', but btf_var_show() does not.
A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux
BTF to bpf_snprintf_btf() thus NULL-derefs:
KASAN: probably user-memory-access in range [0x46638-0x4663f]
RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8259)
btf_type_snprintf_show (kernel/bpf/btf.c:8329)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Resolve the var's type directly with btf_type_skip_modifiers() when
resolved_ids is NULL, mirroring btf_modifier_show(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
rds_conn_path_reset() wipes the whole flag word with a plain
cp->cp_flags = 0 store. Every other accessor of that word uses
atomic bitops, and some of them can run concurrently with the reset:
RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the
transport completion paths, neither of which holds anything that
excludes the shutdown worker. A plain store racing an atomic
read-modify-write on the same word is a data race, and whichever
side loses has its update silently discarded.
Clear the two bits the reset is actually responsible for instead.
RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they
belong to the caller, rds_conn_shutdown(), which waits for both to be
clear before calling the transport shutdown and this reset.
This also gives every bit in cp_flags a single well-defined writer
discipline, which the following patches rely on when they turn
RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the
teardown: a blanket store mid-teardown would destroy lock ownership
that an atomic clear preserves.
Oracle UEK carries the same conversion ("net/rds: Preserve essential
connection state flags"), motivated by its asynchronous shutdown
state machine, whose progress and destroy flags must survive the
reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL
because there the reset runs as the final step of a teardown that
owns both bits, making those clears its unlock. Upstream that
release belongs in rds_conn_shutdown(): once a later patch in this
series turns the two bits into locks held across the teardown, ending
ownership needs release semantics and a wake-up that a plain clear
inside the reset would not provide.
Based on Oracle UEK commit "net/rds: Preserve essential connection
state flags" by Gerd Rausch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: use wq_has_sleeper() in release_in_xmit()
release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then
checks waitqueue_active() to decide whether anyone needs waking.
clear_bit_unlock() is only a release operation: it orders the
critical section before the bit clear, but does not order the
subsequent plain load of the wait queue head after it. The waiter
side does the mirror image - it adds itself to the wait queue and
then tests the bit. That is the classic store-buffering pattern: the
releasing CPU can read the wait queue as empty while the waiting CPU
still reads the bit as set, so the sleeper is never woken.
The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(),
both in uninterruptible wait_event() with no timeout. A lost wake-up
strands the shutdown worker on its single-threaded workqueue until
some other sender releases the bit again - and on a connection that
is being torn down precisely because it failed, there may never be
another sender.
The barrier used to be there: release_in_xmit() did clear_bit()
followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds:
introduce acquire/release ordering in acquire/release_in_xmit()")
folded both into clear_bit_unlock(), which strengthened the lock
hand-off but silently dropped the full barrier the wake-up check
depends on. The refill counterpart, release_refill() in
net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for
exactly this reason.
Use wq_has_sleeper(), which is waitqueue_active() preceded by the
required full barrier. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a04f5d
("net: fix removing a namespace with conflicting altnames") fixed it.
cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix.
Let's generalise the fix by removing conflicting altnames for dying
netns in __dev_change_net_namespace().
[0]:
cfg80211_switch_netns(rdev, &init_net)
WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160
Modules linked in:
CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: netns cleanup_net
RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871
Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e
RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293
RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000
R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000
R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20
FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253
cleanup_net+0x572/0x810 net/core/net_namespace.c:706
process_one_work kernel/workqueue.c:3387 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: do not clear curr_active_slave prematurely when releasing all slaves
When releasing all slaves during bond destruction (all == true),
__bond_release_one() unconditionally clears bond->curr_active_slave to
NULL in every iteration.
If a backup slave is released before the active slave,
bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(),
which increments the active slave dev promiscuity counter and sets
bond_info->primary_is_promisc = 1.
Because bond->curr_active_slave was prematurely cleared to NULL when
releasing the backup slave, the subsequent iteration releasing the active
slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL)
is skipped. Consequently, bond_alb_handle_active_change() is never called
to decrement the promiscuity counter, permanently leaking promiscuous
mode on the physical device after bond teardown.
When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets
bond->curr_active_slave to NULL. We only need to avoid selecting a new
active slave when all == true. Replace the if (all) branch with
if (!all && oldcurrent == slave). |
| A vulnerability was identified in zhistaredu StarTraining up to 3.8.1. Impacted is the function anonymous of the file /druid/index.html of the component Druid Console. Such manipulation leads to missing authentication. The attack may be performed from remote. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.22 and 4.1.14 and 4.2.7, Admin-only atom exhaustion: PUT /api/users tags list. settags/2 maps rabbitdatacoercion:toatom/1 over the user's tags list. The 20 MB management body limit fits ~3-4M short tag strings. An administrator can crash the node in a single request by creating a user (or importing definitions) with ~1M unique tag administrator. This issue is fixed in versions 4.0.22 and 4.1.14 and 4.2.7. |
| Use After Free in the drag source path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to cause the terminal to read from and write to freed heap memory, because drag_remote_file_data() in kitty/dnd.c holds a DragRemoteItem pointer into an array it does not own, calls toplevel_data_for_drag() or subdir_data_for_drag(), and then continues to use that pointer. Those helpers, and add_payload() and populate_dir_entries() which they call, report errors through the abrt() macro, which expands to cancel_drag() followed by a plain return, and cancel_drag() calls drag_free_offer(), which frees the array the pointer refers to. The helpers return void, so the caller receives no indication that the teardown happened, and proceeds to call all_children_complete() on the freed pointer, which dereferences it, and then to write through it. That dereference is guarded by a local flag that is set when the request carries no payload and announces no further data, which is the same condition that selects the finalisation block of add_payload(), so the error paths in that block reach it: a create that fails because an entry of the same name already exists, because the client may declare two entries with one name and the create operations use O_CREAT with O_EXCL and symlinkat(), a mkdirat() failure other than EEXIST, and the directory entry allocation paths. Both branches reach it. In the top level branch the caller's pointer is never cleared, so clearing the owning structure's own pointers during teardown does not help. In the sub directory branch subdir_data_for_drag() sets the caller's pointer to NULL on entry and assigns it only after its own last error path, so its own aborts leave the caller with NULL and are stopped by a null check, but it then calls add_payload() with that pointer set, and an abort there leaves the caller holding a freed child node inside the item tree, which drag_free_offer() frees by recursion. This results in undefined behaviour in the terminal process, reachable from the byte stream of any program running in the window. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3, native MQTT and MQTT over WebSocket behind a trusted PROXY Protocol frontend could lose the proxy-derived client address before the MQTT authentication path checked loopback_users, causing the frontend-to-broker address to be treated as loopback. An attacker who can reach the trusted frontend and has valid credentials for a loopback-restricted account can therefore bypass the source-address restriction; the issue does not bypass password authentication. This issue is fixed in versions 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.23, 4.1.14, 4.2.9, and 4.3.3, the optional rabbitmq_jms_topic_exchange plugin's x-jms-topic exchange accepted a client-controlled rjms_erlang_selector binding expression whose LIKE evaluator expanded percent and underscore wildcards into overlapping PCRE fragments. It executed those fragments with raw re:run/3 without match or recursion limits, allowing an authenticated tenant that can bind and publish to consume broker scheduler CPU and deny service with pathological selectors. This issue is fixed in versions 4.0.23, 4.1.14, 4.2.9, and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, AMQP 1.0 management GET /bindings exposes full binding topology to any authenticated AMQP user without resource/management permission checks. the AMQP 1.0 HTTP-over-AMQP management endpoint GET /bindings (the rabbitamqpmanagement handler) enumerates bindings between an arbitrary source exchange and destination queue/exchange in the caller's virtual host without performing any resource-level permission check. Unlike every sibling operation in the same module (which call checkresourceaccess / bindingchecks), the GET handler ignores the authenticated User and returns the binding list unchanged. As a result, any authenticated AMQP 1.0 client that can open a management link pair , including users with no management/monitoring/policymaker/administrator tag , can enumerate the complete binding topology (source exchanges, destination queues/exchanges, routing keys, and binding arguments) of the virtual host they can access. The equivalent HTTP management API (GET /api/bindings) Confidentiality impact: a non-management AMQP 1.0 user can enumerate the complete routing topology of any virtual host it can connect to , every (source exchange, destination queue/exchange, routing key, binding arguments) This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23. |
| Missing Authorization in the drop handling path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to obtain the contents of files dragged over the window even when the user never completes the drop, because drop_enqueue_request() in kitty/dnd.c serves a drag data request without first checking the drop state of the window, so a client that issues the request while a drag is merely hovering receives the data offered for the drag. In the same file, drop_left_child(), which runs when the drag leaves the window without a drop having occurred, releases the offered MIME list but retains the pending request state, the open file descriptor and its main loop transfer timer, the directory handles, the URI list and the pending MIME name, so a client can continue to read through a retained directory handle, and an in-flight file transfer continues to stream, when no drag is in progress. The file contents are read from the filesystem by the kitty process itself using the paths the drag source offered. This results in disclosure of the contents of files the user moved over the window without ever releasing them into it. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, the Shovel parameter parser converted attacker-controlled runtime parameter values into non-garbage-collected Erlang atoms before bounding them or checking a fixed allowlist. Exploitation requires network access to the Management HTTP API, valid credentials with both the management and policymaker tags, permission to set Shovel runtime parameters on a vhost, and the rabbitmq_shovel and rabbitmq_shovel_management plugins to be enabled. The attacker can exhaust the node-wide atom table and deny service, and malicious parameters are stored durably and reparsed when workers start, so atom pressure can recur after restart without a live attacker connection. This issue is fixed in versions 4.2.9 and 4.3.3. |
