| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: me4000: Fix potential overrun of firmware buffer
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmware loading was totally broken before commit ac584af59945
("staging: comedi: me4000: fix firmware downloading"), but that is the
most sensible target for this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: me_daq: Fix potential overrun of firmware buffer
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: tdx-guest: Fix handling of host controlled 'quote' buffer length
Validate host controlled value `quote_buf->out_len` that determines how
many bytes of the quote are copied out to guest userspace. In TDX
environments with remote attestation, quotes are not considered private,
and can be forwarded to an attestation server.
Catch scenarios where the host specifies a response length larger than
the guest's allocation, or otherwise races modifying the response while
the guest consumes it.
This prevents contents beyond the pages allocated for `quote_buf`
(up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace,
and possibly forwarded in attestation requests.
Recall that some deployments want per-container configs-tsm-report
interfaces, so the leak may cross container protection boundaries, not
just local root. |
| An OS command injection vulnerability in the OpenVPN module
of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to execute system commands when a specially crafted configuration file is processed due to insufficient input validation. Successful exploitation may allow modification of configuration files, disclosure of sensitive information, or further compromise of device integrity.
This issue affects AX53 v1.0: before 1.7.1 Build 20260213. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate control request size
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: convert inline data to extents when truncate exceeds inline size
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: nxp-fspi: fix the KASAN report out-of-bounds bug
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==============================================================
---truncated--- |
| NASA cFS (Core Flight System) Aquila is vulnerable to segmentation fault via sending a malicious telecommand to the Memory Management Module. |
| In the Linux kernel, the following vulnerability has been resolved:
module: Fix kernel panic when a symbol st_shndx is out of bounds
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/ |
| A downgrade issue affecting Intel-based Mac computers was addressed with additional code-signing restrictions. This issue is fixed in macOS Sequoia 15.3, macOS Sonoma 14.7.3, macOS Ventura 13.7.3. An app may be able to modify protected parts of the file system. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: use the current queue number for stats
There's a potential mismatch between the memory reserved for statistics
and the amount of memory written.
gem_get_sset_count() correctly computes the number of stats based on the
active queues, whereas gem_get_ethtool_stats() indiscriminately copies
data using the maximum number of queues, and in the case the number of
active queues is less than MACB_MAX_QUEUES, this results in a OOB write
as observed in the KASAN splat.
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78
[macb]
Write of size 760 at addr ffff80008080b000 by task ethtool/1027
CPU: [...]
Tainted: [E]=UNSIGNED_MODULE
Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
print_report+0x384/0x5e0
kasan_report+0xa0/0xf0
kasan_check_range+0xe8/0x190
__asan_memcpy+0x54/0x98
gem_get_ethtool_stats+0x54/0x78 [macb
926c13f3af83b0c6fe64badb21ec87d5e93fcf65]
dev_ethtool+0x1220/0x38c0
dev_ioctl+0x4ac/0xca8
sock_do_ioctl+0x170/0x1d8
sock_ioctl+0x484/0x5d8
__arm64_sys_ioctl+0x12c/0x1b8
invoke_syscall+0xd4/0x258
el0_svc_common.constprop.0+0xb4/0x240
do_el0_svc+0x48/0x68
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
The buggy address belongs to a 1-page vmalloc region starting at
0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff00000a333000 pfn:0xa333
flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff)
raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
Fix it by making sure the copied size only considers the active number of
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Make sure to use pmu_ctx->pmu for groups
Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access
when group_sched_in() fails and needs to roll back.
This *should* be handled by the transaction callbacks, but he found that when
the group leader is a software event, the transaction handlers of the wrong PMU
are used. Despite the move_group case in perf_event_open() and group_sched_in()
using pmu_ctx->pmu.
Turns out, inherit uses event->pmu to clone the events, effectively undoing the
move_group case for all inherited contexts. Fix this by also making inherit use
pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context.
Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the
group case. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.3, macOS Sonoma 14.7.3, macOS Ventura 13.7.3, macOS Ventura 13.7.5. Parsing a maliciously crafted file may lead to an unexpected app termination. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gw: fix OOB heap access in cgw_csum_crc8_rel()
cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx():
int from = calc_idx(crc8->from_idx, cf->len);
int to = calc_idx(crc8->to_idx, cf->len);
int res = calc_idx(crc8->result_idx, cf->len);
if (from < 0 || to < 0 || res < 0)
return;
However, the loop and the result write then use the raw s8 fields directly
instead of the computed variables:
for (i = crc8->from_idx; ...) /* BUG: raw negative index */
cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */
With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame,
calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with
i = -64, reading cf->data[-64], and the write goes to cf->data[-64].
This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the
start of the canfd_frame on the heap.
The companion function cgw_csum_xor_rel() uses `from`/`to`/`res`
correctly throughout; fix cgw_csum_crc8_rel() to match.
Confirmed with KASAN on linux-7.0-rc2:
BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0
Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62
To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed. |
| xrdp is an open source RDP server. Versions through 0.10.5 allow an authenticated remote user to execute arbitrary commands on the server due to unsafe handling of the AlternateShell parameter in xrdp-sesman. When the AllowAlternateShell setting is enabled (which is the default when not explicitly configured), xrdp accepts a client-supplied AlternateShell value and executes it via /bin/sh -c during session initialization. This results in shell-interpreted execution of unsanitized, user-controlled input. This behavior effectively provides a scriptable remote command execution primitive over RDP within the security context of the authenticated user, occurring prior to normal window manager startup. This can bypass expected session initialization flows and operational assumptions that restrict execution to interactive desktop environments. This issue has been fixed in version 0.10.6. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack-out-of-bounds write in devmap
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry
Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X
interrupt to the host using a writel(), which generates a PCI posted write
transaction. There's no completion for posted writes, so the writel() may
return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also
unmaps the outbound ATU entry used for the PCI write, so the write races
with the unmap.
If the PCI write loses the race with the ATU unmap, the write may corrupt
host memory or cause IOMMU errors, e.g., these when running fio with a
larger queue depth against nvmet-pci-epf:
arm-smmu-v3 fc900000.iommu: 0x0000010000000010
arm-smmu-v3 fc900000.iommu: 0x0000020000000000
arm-smmu-v3 fc900000.iommu: 0x000000090000f040
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0
arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0
Flush the write by performing a readl() of the same address to ensure that
the write has reached the destination before the ATU entry is unmapped.
The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit
8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there
it was solved by dedicating an outbound iATU only for MSI. We can't do the
same for MSI-X because each vector can have a different msg_addr and the
msg_addr may be changed while the vector is masked.
[bhelgaas: commit log] |
