| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Put CPU offline callback in ONLINE section to allow failure
syzbot reported the following warning:
DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614
at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.
Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path
In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error()
dereferences p->comm and p->pid. If the iterator's reference is the last
drop, the task is freed synchronously and the deref becomes a UAF.
Move put_task_struct() past scx_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: driver: Check ACPI_COMPANION() against NULL during probe
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks
against NULL to 13 platform drivers handling core ACPI devices.
Also change the value returned by the ACPI thermal zone driver when
the device's ACPI companion is not present to -ENODEV for consistency
with the other drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: phy: avoid NULL deref when PHY driver is unbound
phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Disable broadcast TLB flush when PCID is disabled
Booting with "nopcid" clears X86_FEATURE_PCID and keeps CR4.PCIDE from being
set to one. On AMD CPUs that support INVLPGB, broadcast TLB flushing remains
enabled.
There are two checks that decide whether the global ASID code runs,
mm_global_asid() and consider_global_asid(), that key off of the
X86_FEATURE_INVLPGB feature. Once an mm becomes active on more than three
CPUs, consider_global_asid() assigns it a global ASID, after which
flush_tlb_mm_range() takes the broadcast_tlb_flush() path using a non-zero
PCID. Issuing an INVLPGB with a non-zero PCID while CR4.PCIDE is not set
results in a #GP:
Oops: general protection fault, kernel NULL pointer dereference 0x1: 0000 [#1] SMP NOPTI
CPU: 158 UID: 0 PID: 3119 Comm: snap Not tainted 7.1.0-rc3 #1 PREEMPT(full)
Hardware name: ...
RIP: 0010:broadcast_tlb_flush
Code: ... 89 da 48 83 c8 07 <0f> 01 fe eb 08 cc cc cc ...
Call Trace:
<TASK>
flush_tlb_mm_range
ptep_clear_flush
wp_page_copy
? _raw_spin_unlock
__handle_mm_fault
handle_mm_fault
do_user_addr_fault
exc_page_fault
asm_exc_page_fault
All processors that support broadcast TLB invalidation also have PCID support,
so it is only the "nopcid" scenario that is of concern. In this situation just
disable the broadcast TLB support using the CPUID dependency support by making
X86_FEATURE_INVLPGB dependent on X86_FEATURE_PCID.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix deadlock on shared proxy's parent removal
Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation. |
| In the Linux kernel, the following vulnerability has been resolved:
block: recompute nr_integrity_segments in blk_insert_cloned_request
blk_insert_cloned_request() already recomputes nr_phys_segments
against the bottom queue, because "the queue settings related to
segment counting may differ from the original queue." The exact same
reasoning applies to integrity segments: a stacked driver's underlying
queue can have tighter virt_boundary_mask, seg_boundary_mask, or
max_segment_size than the top queue, in which case
blk_rq_count_integrity_sg() against the bottom queue produces a
different count than the cached rq->nr_integrity_segments inherited
from the source request by blk_rq_prep_clone().
When the cached count is lower than the bottom queue's actual count,
blk_rq_map_integrity_sg() trips
BUG_ON(segments > rq->nr_integrity_segments);
on dispatch. The same families of stacked setups that motivated the
existing nr_phys_segments recompute -- dm-multipath fanning out to
nvme-rdma in particular -- can produce this.
Mirror the nr_phys_segments handling: when the request carries
integrity, recompute nr_integrity_segments against the bottom queue
and reject the request if it exceeds the bottom queue's
max_integrity_segments. blk_rq_count_integrity_sg() and
queue_max_integrity_segments() are both already available via
<linux/blk-integrity.h>, which blk-mq.c includes.
This closes a latent gap in the stacking contract and brings the
integrity-segment accounting in line with the existing
phys-segment accounting. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check to response query
Add variable representations for BufLength and BufOffset in
rndis_query_response(), and perform a length check on them.
This is identical to how rndis_set_response() handles these parameters. |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Plug race against a concurrent OOM disable
syzbot reported a puzzling splat:
WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20
stub_timer() is installed as timer callback function in
hrtimer_fixup_assert_init(), which is invoked when
debug_object_assert_init() can't find a shadow object. In that case debug
objects emits a warning about it before invoking the fixup.
Though the provided console log lacks this warning and instead has the
following a few seconds before the splat:
ODEBUG: Out of memory. ODEBUG disabled
So the object was looked up in debug_object_assert_init() and the lookup
failed due a concurrent out of memory situation which disabled debug
objects and freed the shadow objects:
debug_object_assert_init()
if (!debug_objects_enabled)
return; obj = alloc();
if (!obj) {
// Out of memory
debug_objects_enabled = false;
free_objects();
obj = lookup_or_alloc();
// The lookup failed because the other side
// removed the objects, so this returns
// an error code as the object in question
// is not statically initialized
if (!IS_ERR_OR_NULL(obj))
return;
if (!obj) {
debug_oom();
return;
}
print(...)
if (!debug_objects_enabled)
return;
fixup(...)
The debug object splat is skipped because debug_objects_enabled is false,
but the fixup callback is invoked unconditionally, which makes the timer
disfunctional.
This is only a problem in debug_object_assert_init() and
debug_object_activate() as both have to handle statically initialized
objects and therefore must handle the error pointer return case
gracefully. All other places only handle the found/not found case and the
NULL pointer return is a signal for OOM. Otherwise they get a valid shadow
object.
Plug the hole by checking whether debug objects are still enabled before
invoking the print and fixup function in those two places. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Release VFCT ACPI table reference
amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table()
but never releases it. acpi_get_table() takes a reference on the
table (incrementing its validation_count and mapping it on the 0->1
transition); without a paired acpi_put_table() the mapping is leaked
on every call, whether or not a matching VBIOS image is found.
Route all exit paths after the table is acquired through a common
acpi_put_table(). The VBIOS image is copied out with kmemdup() before
the table is released, so it remains valid for the caller.
(cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/rtp: Add RING_FORCE_TO_NONPRIV_DENY to OA whitelists
Unconditionally whitelisting OA registers is a security violation. Set
RING_FORCE_TO_NONPRIV_DENY bit in OA nonpriv slots, so that OA registers
don't get whitelisted by default after probe, gt reset, resume and engine
reset.
(cherry picked from commit 90511bdcfda97211c01f1d945d4ea616578d8fca) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Return error on non-migratable faults requiring devmem
Non-migratable faults that require devmem incorrectly jump to the 'out'
label, which squashes the error code intended to be returned to the
upper layers. Fix this by returning -EACCES instead.
(cherry picked from commit c4508edb2c723de93717272488ea65b165637eac) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx: fix cleaner shader IB buffer overflow
The cleaner shader sysfs path allocates a 16-dword (64 byte) IB but
incorrectly fills (align_mask + 1) dwords. On GFX rings align_mask is
0xff, so the loop wrote 256 dwords into a 64-byte buffer, causing a
kernel page fault.
The IB only needs to be a minimal NOP shell to schedule the job; the
cleaner shader itself is emitted on the ring via emit_cleaner_shader().
Fill 16 dwords to match the allocation.
v2: Use ib_size_dw variable (Lijo)
(cherry picked from commit bf21af331ebf72d0935fd70c73192414a422c03a) |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: fix monitor mode crash with sdio driver
mt7921s driver may receive frames with fragment buffers. If there is a
CTS packet received in monitor mode, the payload is 10 bytes only and
need 6 bytes header padding after RXD buffer. However, only RXD in the
first linear buffer, if we pull buffer size RXD-size+6 bytes with
skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in
__skb_pull().
To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to
256 to make sure all MCU operation in linear buffer.
[ 52.007562] kernel BUG at include/linux/skbuff.h:2313!
[ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 52.007987] pc : skb_pull+0x48/0x4c
[ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common]
[ 52.008361] Call trace:
[ 52.008377] skb_pull+0x48/0x4c
[ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c]
[ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917]
[ 52.008449] kthread+0x148/0x3ac
[ 52.008466] ret_from_fork+0x10/0x30 |
| IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 could allow an unauthenticated user to read sensitive information by bypassing authentication through a specially crafted HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps65219: fix irq_data.rdev not being assigned
Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:
Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork
Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.
Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null
Fixes a NULL pointer derefence bug triggered from tap driver.
When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null
(in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb)
virtio_net_hdr_to_skb calls dev_parse_header_protocol which
needs skb->dev field to be valid.
The line that trigers the bug is in dev_parse_header_protocol
(dev is at offset 0x10 from skb and is stored in RAX register)
if (!dev->header_ops || !dev->header_ops->parse_protocol)
22e1: mov 0x10(%rbx),%rax
22e5: mov 0x230(%rax),%rax
Setting skb->dev before the call in tap.c fixes the issue.
BUG: kernel NULL pointer dereference, address: 0000000000000230
RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap]
Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48
RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010
RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300
RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8
R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6
FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0
Call Trace:
tap_get_user+0x3f1/0x540 [tap]
tap_sendmsg+0x56/0x362 [tap]
? get_tx_bufs+0xc2/0x1e0 [vhost_net]
handle_tx_copy+0x114/0x670 [vhost_net]
handle_tx+0xb0/0xe0 [vhost_net]
handle_tx_kick+0x15/0x20 [vhost_net]
vhost_worker+0x7b/0xc0 [vhost]
? vhost_vring_call_reset+0x40/0x40 [vhost]
kthread+0xfa/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dsi: don't dump registers past the mapped region
On DSI 6G platforms the IO address space is internally adjusted by
io_offset. Later this adjusted address might be used for memory dumping.
However the size that is used for memory dumping isn't adjusted to
account for the io_offset, leading to the potential access to the
unmapped region. Lower ctrl_size by the io_offset value to prevent
access past the mapped area.
msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P)
msm_dsi_host_snapshot+0x4c/0x78 [msm]
msm_dsi_snapshot+0x28/0x50 [msm]
msm_disp_snapshot_capture_state+0x74/0x140 [msm]
msm_disp_snapshot_state_sync+0x60/0x90 [msm]
_msm_disp_snapshot_work+0x30/0x90 [msm]
kthread_worker_fn+0xdc/0x460
kthread+0x120/0x140
Patchwork: https://patchwork.freedesktop.org/patch/721747/ |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:
- directly, for the iExtension string-descriptor fixup loop;
- indirectly, four times via uvc_copy_descriptors() (once per speed),
where the helper iterates uvc->desc.extension_units (which aliases
&opts->extension_units) to size and emit XU descriptors.
The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations. A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.
Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label. This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.
Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: pch_uart: add check for dma_alloc_coherent()
Add a check for dma_alloc_coherent() failure to prevent a potential
NULL pointer dereference in dma_handle_rx(). Properly release DMA
channels and the PCI device reference using a goto ladder if the
allocation fails. |
