| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: account for fraggap on the paged allocation path
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix NULL pointer dereference in mt7996_init_tx_queues()
When MT76_NPU and CONFIG_NET_MEDIATEK_SOC_WED are enabled and
mt76 detects properly the Airoha NPU SoC, mt7996_init_tx_queues() will
dereference a NULL WED pointer.
Fix the issue by always passing the WED pointer from mt7996_dma_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/fwctl: Fix __fortify_panic
Fix a runtime assertion in cxlctl_get_supported_features(). Fortify
complains that it is potentially overflowing the entries array per
__counted_by_le(num_entries). Quiet the false positive by initializing
@num_entries earlier.
memcpy: detected buffer overflow: 48 byte write of buffer size 0
WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#7: fwctl/1398
RIP: 0010:__fortify_report+0x50/0xa0
Call Trace:
__fortify_panic+0xd/0xf
cxlctl_get_supported_features.cold+0x23/0x35 [cxl_core] |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Reference count incoming FLB data
Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so
that the FLB structure cannot be freed while the caller is actively using
it. Add an additional liveupdate_flb_put_incoming() function so the
caller can explicitly indicate when it is done using the FLB data.
During a Live Update, a subsystem might need to hold onto the incoming
File-Lifecycle-Bound (FLB) data for an extended period, such as during
device enumeration. Incrementing the reference count guarantees that the
data remains valid and accessible until the subsystem releases it,
preventing future use-after-free bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: guard against possible NULL deref in __in6_dev_stats_get()
dev_get_by_index_rcu() could return NULL if the original physical
device is unregistered.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: spacemit: fix NULL check in spacemit_pin_set_config
spacemit_pin_set_config() looks up the per-pin descriptor with
spacemit_get_pin() then checks the wrong variable for failure:
const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
...
if (!pin)
return -EINVAL;
reg = spacemit_pin_to_reg(pctrl, spin->pin);
pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a
valid pin, so rejecting it here drops the PAD config write for the first
pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as
its first entry, so its drive-strength / bias configuration was silently
ignored.
The intended guard is against spacemit_get_pin() returning NULL when the
pin id isn't in the SoC's pin table. Check spin instead, which both
restores PAD setup for pin 0 and prevents a NULL deref on spin->pin. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - add response length checks
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer
The management mailbox channel cleanup helpers can be called from
error handling paths when mgmt_chann has already been destroyed.
Add NULL checks to xdna_mailbox_free_channel() and
xdna_mailbox_stop_channel() so the cleanup path safely returns instead
of dereferencing a NULL mailbox channel pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: defer reset until cmd_mutex is unlocked
vub300_cmndwork_thread() holds cmd_mutex while it sends a command and
waits for the command response. If the response wait times out,
__vub300_command_response() kills the command URBs and then synchronously
resets the USB device through usb_reset_device().
That reset path re-enters the driver through vub300_pre_reset(), which
also takes cmd_mutex. The worker therefore tries to acquire the same
mutex recursively while it is still holding it from the command path.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real worker and timeout/reset carrier:
vub300_cmndwork_thread()
__vub300_command_response()
usb_lock_device_for_reset()
usb_reset_device()
vub300_pre_reset()
Lockdep reported the same-task recursive acquisition on cmd_mutex:
WARNING: possible recursive locking detected
... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv]
... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv]
Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv]
*** DEADLOCK ***
Return a flag from __vub300_command_response() when the timeout path needs
a device reset, then perform the reset after vub300_cmndwork_thread() has
cleared the in-flight command state and dropped cmd_mutex. The reset is
still attempted before mmc_request_done(), preserving the existing request
completion ordering while avoiding the recursive lock. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size
The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58
bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing
64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512,
eight times the actual on-device size.
header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the
RAS capability iomap, overrunning the 88-byte mapping by 448 bytes.
The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE
(512) bytes from its source. For the CPER caller the source is
struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a
stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes
of kernel stack into the trace event ring buffer where userspace can
read it via tracefs.
Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it,
bringing all iomap readers into agreement on 16 dwords. Userspace tools
such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32)
header_log layout in the cxl_aer_uncorrectable_error trace event. Add
CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event
__array and its memcpy to preserve that ABI. Both callers now pass a
zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only
the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware;
the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring
buffer layout intact.
[ dj: Replaced 64 with SZ_64 per RichardC ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Inject SEA if kvm_translate_vncr() can't resolve PFN
kvm_handle_vncr_abort() assumes that s1_walk_result conveys an abort
when kvm_translate_vncr() returns -EFAULT. This is not always the case
as it's possible to encounter 'late' failures on the output of S1
translation, e.g. a GFN outside of the memslots.
Fix it by preparing an external abort before returning from
kvm_translate_vncr(). Get rid of the BUG_ON() in the fault injection
path while at it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: use conntrack GC to reap expectations
This patch replaces the timer API by GC worker approach for
expectations, as it already happened in many other subsystems.
Use the existing conntrack GC worker to iterate over the local list of
expectations in the master conntrack to reap expired expectations.
Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct
expectation which nevers sets it. Hold the expectation spinlock while
iterating over the master conntrack expectation list to synchronize with
nf_ct_remove_expectations(). This also performs runtime packet path
garbage collection through the expectation insertion and lookup
functions while walking over one of the chains of the global expectation
hashtables. Unconfirmed conntrack entries are skipped since ct->ext can
be reallocated and dying are skipped since those will be gone soon.
Set on IPS_HELPER_BIT if the helper ct extension is added, then the new
GC worker does not need to bump the ct refcount to check if the ct->ext
helper is available.
This removes the extra bump on the refcount for expectation timers, this
allows to remove several nf_ct_expect_put() calls after the unlink,
after this update only refcount remains at 1 while on the expectation
hashes.
This patch implicitly addresses a race with the existing timer API
allowing an expectation to access a stale exp->master pointer which has
been already released when expectation removal loses races with an
expiring timer, ie. timer_del() reporting false.
Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This
is needed by nf_conntrack_unexpect_related() which is called in error
paths to invalidate newly created expectations that has been added into
the hashes. These expectactions cannot be inmediately released as GC or
nf_ct_remove_expectations() could race to make it. On expectation
insert, the runtime GC reaps stale expectations before checking the
expectation limit set by policy.
Set current timestamp in nf_ct_expect_alloc(), then add the expectation
policy timeout (or custom timeout specified added on top of this) to
specify the expectation lifetime. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer
Zero the allocated buffer in j1939_session_fresh_new() to ensure it
contains no residual data.
While there is a potential performance impact if users allocate maximum
sized ETP buffers, most real-world use cases are not noticeably affected
since the maximum known buffer size is typically around 65K.
[mkl: add Message-ID] |
| An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write arbitrary files and conduct denial-of-service attacks in DSM. |
| An improper access control vulnerability exists in the web management interface of PaperCut MF and PaperCut NG. Under specific conditions, unauthenticated remote requests targeting administrative functions can trigger backend actions prior to the completion of access validation checks. This allows an unauthenticated remote attacker to modify certain system configurations. |
| An unsafe dynamic class loading vulnerability exists in the database connection utilities of PaperCut MF and PaperCut NG. The application instantiates database driver classes based on configurable driver names without validating against an allowlist of approved drivers. If an attacker can manipulate system configuration parameters, this enables the execution of arbitrary Java bytecode residing on the application classpath under the security context of the PaperCut server process. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix NULL pointer dereference in initialization
The mtd_info contains a struct device, which must be linked to its
parent. Without this, the initialization of the MTD fails with a NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Fix OOB read in hid_get_report for numbered reports
When a caller passes a size of 0 to hid_report_raw_event() for a
numbered report, the function originally called hid_get_report() before
performing any size validation.
Inside hid_get_report(), if the report is numbered (report_enum->numbered
is true), it unconditionally dereferences data[0] to extract the report ID.
With a size of 0, this results in an out-of-bounds read or kernel panic.
Fix this by moving the numbered report size validation check before the
call to hid_get_report(), ensuring that size is at least 1 before
dereferencing the data pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: Hold notifier_lock for write on inject test path
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \
drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper]
Call Trace:
xe_vma_userptr_do_inval+0x40d/0xfd0 [xe]
xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe]
xe_vma_userptr_force_invalidate+0xde/0x290 [xe]
vma_check_userptr.constprop.0+0x1c6/0x220 [xe]
xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe]
...
xe_vm_bind_ioctl+0x3a0a/0x4480 [xe]
Acquire notifier_lock for write in pre-commit when the inject Kconfig
is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock().
Rename xe_svm_assert_held_read() to
xe_svm_assert_held_read_or_inject_write() so it asserts the correct
mode under each build configuration. Production builds
(CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode
behavior bit-for-bit.
(cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365) |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix iommu domain lifetime race during device removal
When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If
amdxdna_gem_obj_free() is called after device removal, it may attempt to
access xdna->domain, resulting in a use-after-free.
Fix the race by adding freeing xdna->domain as a managed release action,
so its lifetime is managed by DRM and remains valid until all managed
resources are released. |
