| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rnbd-srv: Zero the rsp buffer before using it
Before using the data buffer to send back the response message, zero it
completely. This prevents any stray bytes to be picked up by the client
side when there the message is exchanged between different protocol
versions. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx25821: Fix a resource leak in cx25821_dev_setup()
Add release_mem_region() if ioremap() fails to release the memory
region obtained by cx25821_get_resources(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sysfs: fix chip removal with GPIOs exported over sysfs
Currently if we export a GPIO over sysfs and unbind the parent GPIO
controller, the exported attribute will remain under /sys/class/gpio
because once we remove the parent device, we can no longer associate the
descriptor with it in gpiod_unexport() and never drop the final
reference.
Rework the teardown code: provide an unlocked variant of
gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken
before unregistering the parent device itself. This is done to prevent
any new exports happening before we unregister the device completely. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ccs: Avoid possible division by zero
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: Fix NULL vs IS_ERR() check in probe()
The iommu_paging_domain_alloc() function doesn't return NULL pointers,
it returns error pointers. Update the check to match. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check. |
| In the Linux kernel, the following vulnerability has been resolved:
block: avoid to reuse `hctx` not removed from cpuhp callback list
If the 'hctx' isn't removed from cpuhp callback list, we can't reuse it,
otherwise use-after-free may be triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind()
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: ensure snd_una is properly initialized on connect
This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.
Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l: async: Properly re-initialise notifier entry in unregister
The notifier_entry of a notifier is not re-initialised after unregistering
the notifier. This leads to dangling pointers being left there so use
list_del_init() to return the notifier_entry an empty list. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: Fix release of pinned pages when __io_uaddr_map fails
Looking at the error path of __io_uaddr_map, if we fail after pinning
the pages for any reasons, ret will be set to -EINVAL and the error
handler won't properly release the pinned pages.
I didn't manage to trigger it without forcing a failure, but it can
happen in real life when memory is heavily fragmented. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: ncm: Fix handling of zero block length packets
While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX
set to 65536, it has been observed that we receive short packets,
which come at interval of 5-10 seconds sometimes and have block
length zero but still contain 1-2 valid datagrams present.
According to the NCM spec:
"If wBlockLength = 0x0000, the block is terminated by a
short packet. In this case, the USB transfer must still
be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If
exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent,
and the size is a multiple of wMaxPacketSize for the
given pipe, then no ZLP shall be sent.
wBlockLength= 0x0000 must be used with extreme care, because
of the possibility that the host and device may get out of
sync, and because of test issues.
wBlockLength = 0x0000 allows the sender to reduce latency by
starting to send a very large NTB, and then shortening it when
the sender discovers that there’s not sufficient data to justify
sending a large NTB"
However, there is a potential issue with the current implementation,
as it checks for the occurrence of multiple NTBs in a single
giveback by verifying if the leftover bytes to be processed is zero
or not. If the block length reads zero, we would process the same
NTB infintely because the leftover bytes is never zero and it leads
to a crash. Fix this by bailing out if block length reads zero. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: ohci: prevent leak of left-over IRQ on unbind
Commit 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ")
also removed the call to free_irq() in pci_remove(), leading to a
leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove()
when unbinding the driver from the device
remove_proc_entry: removing non-empty directory 'irq/136', leaking at
least 'firewire_ohci'
Call Trace:
? remove_proc_entry+0x19c/0x1c0
? __warn+0x81/0x130
? remove_proc_entry+0x19c/0x1c0
? report_bug+0x171/0x1a0
? console_unlock+0x78/0x120
? handle_bug+0x3c/0x80
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? remove_proc_entry+0x19c/0x1c0
unregister_irq_proc+0xf4/0x120
free_desc+0x3d/0xe0
? kfree+0x29f/0x2f0
irq_free_descs+0x47/0x70
msi_domain_free_locked.part.0+0x19d/0x1d0
msi_domain_free_irqs_all_locked+0x81/0xc0
pci_free_msi_irqs+0x12/0x40
pci_disable_msi+0x4c/0x60
pci_remove+0x9d/0xc0 [firewire_ohci
01b483699bebf9cb07a3d69df0aa2bee71db1b26]
pci_device_remove+0x37/0xa0
device_release_driver_internal+0x19f/0x200
unbind_store+0xa1/0xb0
remove irq with devm_free_irq() before pci_disable_msi()
also remove it in fail_msi: of pci_probe() as this would lead to
an identical leak |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: pruss: Fix double free in pruss_clk_mux_setup()
In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly
calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)
on the error path. However, after the devm_add_action_or_reset()
returns, the of_node_put(clk_mux_np) is called again, causing a double
free.
Fix by returning directly, to avoid the duplicate of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions
struct configfs_item_operations callbacks are defined like the following:
int (*allow_link)(struct config_item *src, struct config_item *target);
void (*drop_link)(struct config_item *src, struct config_item *target);
While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify
the parameters in the correct order, pci_primary_epc_epf_unlink() and
pci_secondary_epc_epf_unlink() specify the parameters in the wrong order,
leading to the below kernel crash when using the unlink command in
configfs:
Unable to handle kernel paging request at virtual address 0000000300000857
Mem abort info:
...
pc : string+0x54/0x14c
lr : vsnprintf+0x280/0x6e8
...
string+0x54/0x14c
vsnprintf+0x280/0x6e8
vprintk_default+0x38/0x4c
vprintk+0xc4/0xe0
pci_epf_unbind+0xdc/0x108
configfs_unlink+0xe0/0x208+0x44/0x74
vfs_unlink+0x120/0x29c
__arm64_sys_unlinkat+0x3c/0x90
invoke_syscall+0x48/0x134
do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0
[mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vt8500lcdfb: fix missing dma_free_coherent()
fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not
freed if the error path is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
minix: Add required sanity checking to minix_check_superblock()
The fs/minix implementation of the minix filesystem does not currently
support any other value for s_log_zone_size than 0. This is also the
only value supported in util-linux; see mkfs.minix.c line 511. In
addition, this patch adds some sanity checking for the other minix
superblock fields, and moves the minix_blocks_needed() checks for the
zmap and imap also to minix_check_super_block().
This also closes a related syzbot bug report. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ... |