| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be
done before mdiobus_free(priv->ds->slave_mii_bus). |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix SError of kernel panic when closed
SError of kernel panic rarely happened while testing fluster.
The root cause was to enter suspend mode because timeout of autosuspend
delay happened.
[ 48.834439] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 48.834455] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7
[ 48.834461] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025
[ 48.834464] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 48.834468] pc : wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834488] lr : wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834495] sp : ffff8000856e3a30
[ 48.834497] x29: ffff8000856e3a30 x28: ffff0008093f6010 x27: ffff000809158130
[ 48.834504] x26: 0000000000000000 x25: ffff00080b625000 x24: ffff000804a9ba80
[ 48.834509] x23: ffff000802343028 x22: ffff000809158150 x21: ffff000802218000
[ 48.834513] x20: ffff0008093f6000 x19: ffff0008093f6000 x18: 0000000000000000
[ 48.834518] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff74009618
[ 48.834523] x14: 000000010000000c x13: 0000000000000000 x12: 0000000000000000
[ 48.834527] x11: ffffffffffffffff x10: ffffffffffffffff x9 : ffff000802343028
[ 48.834532] x8 : ffff00080b6252a0 x7 : 0000000000000038 x6 : 0000000000000000
[ 48.834536] x5 : ffff00080b625060 x4 : 0000000000000000 x3 : 0000000000000000
[ 48.834541] x2 : 0000000000000000 x1 : ffff800084bf0118 x0 : ffff800084bf0000
[ 48.834547] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 48.834549] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7
[ 48.834554] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025
[ 48.834556] Call trace:
[ 48.834559] dump_backtrace+0x94/0xec
[ 48.834574] show_stack+0x18/0x24
[ 48.834579] dump_stack_lvl+0x38/0x90
[ 48.834585] dump_stack+0x18/0x24
[ 48.834588] panic+0x35c/0x3e0
[ 48.834592] nmi_panic+0x40/0x8c
[ 48.834595] arm64_serror_panic+0x64/0x70
[ 48.834598] do_serror+0x3c/0x78
[ 48.834601] el1h_64_error_handler+0x34/0x4c
[ 48.834605] el1h_64_error+0x64/0x68
[ 48.834608] wave5_dec_clr_disp_flag+0x40/0x80 [wave5]
[ 48.834615] wave5_vpu_dec_clr_disp_flag+0x54/0x80 [wave5]
[ 48.834622] wave5_vpu_dec_buf_queue+0x19c/0x1a0 [wave5]
[ 48.834628] __enqueue_in_driver+0x3c/0x74 [videobuf2_common]
[ 48.834639] vb2_core_qbuf+0x508/0x61c [videobuf2_common]
[ 48.834646] vb2_qbuf+0xa4/0x168 [videobuf2_v4l2]
[ 48.834656] v4l2_m2m_qbuf+0x80/0x238 [v4l2_mem2mem]
[ 48.834666] v4l2_m2m_ioctl_qbuf+0x18/0x24 [v4l2_mem2mem]
[ 48.834673] v4l_qbuf+0x48/0x5c [videodev]
[ 48.834704] __video_do_ioctl+0x180/0x3f0 [videodev]
[ 48.834725] video_usercopy+0x2ec/0x68c [videodev]
[ 48.834745] video_ioctl2+0x18/0x24 [videodev]
[ 48.834766] v4l2_ioctl+0x40/0x60 [videodev]
[ 48.834786] __arm64_sys_ioctl+0xa8/0xec
[ 48.834793] invoke_syscall+0x44/0x100
[ 48.834800] el0_svc_common.constprop.0+0xc0/0xe0
[ 48.834804] do_el0_svc+0x1c/0x28
[ 48.834809] el0_svc+0x30/0xd0
[ 48.834813] el0t_64_sync_handler+0xc0/0xc4
[ 48.834816] el0t_64_sync+0x190/0x194
[ 48.834820] SMP: stopping secondary CPUs
[ 48.834831] Kernel Offset: disabled
[ 48.834833] CPU features: 0x08,00002002,80200000,4200421b
[ 48.834837] Memory Limit: none
[ 49.161404] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - fix packet extraction from stream
When processing TCP stream data in ovpn_tcp_recv, we receive large
cloned skbs from __strp_rcv that may contain multiple coalesced packets.
The current implementation has two bugs:
1. Header offset overflow: Using pskb_pull with large offsets on
coalesced skbs causes skb->data - skb->head to exceed the u16 storage
of skb->network_header. This causes skb_reset_network_header to fail
on the inner decapsulated packet, resulting in packet drops.
2. Unaligned protocol headers: Extracting packets from arbitrary
positions within the coalesced TCP stream provides no alignment
guarantees for the packet data causing performance penalties on
architectures without efficient unaligned access. Additionally,
openvpn's 2-byte length prefix on TCP packets causes the subsequent
4-byte opcode and packet ID fields to be inherently misaligned.
Fix both issues by allocating a new skb for each openvpn packet and
using skb_copy_bits to extract only the packet content into the new
buffer, skipping the 2-byte length prefix. Also, check the length before
invoking the function that performs the allocation to avoid creating an
invalid skb.
If the packet has to be forwarded to userspace the 2-byte prefix can be
pushed to the head safely, without misalignment.
As a side effect, this approach also avoids the expensive linearization
that pskb_pull triggers on cloned skbs with page fragments. In testing,
this resulted in TCP throughput improvements of up to 74%. |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: vfe: Fix out-of-bounds access in vfe_isr_reg_update()
vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop
bound and passes the index to vfe_isr_reg_update(). However,
vfe->line[] array is defined with VFE_LINE_NUM_MAX(4):
struct vfe_line line[VFE_LINE_NUM_MAX];
When index is 4, 5, 6, the access to vfe->line[line_id] exceeds
the array bounds and resulting in out-of-bounds memory access.
Fix this by using separate loops for output lines and write masters. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (occ) Fix division by zero in occ_show_power_1()
In occ_show_power_1() case 1, the accumulator is divided by
update_tag without checking for zero. If no samples have been
collected yet (e.g. during early boot when the sensor block is
included but hasn't been updated), update_tag is zero, causing
a kernel divide-by-zero crash.
The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by
zero issue") only addressed occ_get_powr_avg() used by
occ_show_power_2() and occ_show_power_a0(). This separate code
path in occ_show_power_1() was missed.
Fix this by reusing the existing occ_get_powr_avg() helper, which
already handles the zero-sample case and uses mul_u64_u32_div()
to multiply before dividing for better precision. Move the helper
above occ_show_power_1() so it is visible at the call site.
[groeck: Fix alignment problems reported by checkpatch] |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: fix use-after-free in IO ioctl handlers
The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor
pointer after board->big_gpib_mutex has been released. A concurrent
IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during
this window, causing a use-after-free.
The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly
release big_gpib_mutex before calling their handler. wait_ioctl() is
called with big_gpib_mutex held, but ibwait() releases it internally
when wait_mask is non-zero. In all four cases, the descriptor pointer
obtained from handle_to_descriptor() becomes unprotected.
Fix this by introducing a kernel-only descriptor_busy reference count
in struct gpib_descriptor. Each handler atomically increments
descriptor_busy under file_priv->descriptors_mutex before releasing the
lock, and decrements it when done. close_dev_ioctl() checks
descriptor_busy under the same lock and rejects the close with -EBUSY
if the count is non-zero.
A reference count rather than a simple flag is necessary because
multiple handlers can operate on the same descriptor concurrently
(e.g. IBRD and IBWAIT on the same handle from different threads).
A separate counter is needed because io_in_progress can be cleared from
unprivileged userspace via the IBWAIT ioctl (through general_ibstatus()
with set_mask containing CMPL), which would allow an attacker to bypass
a check based solely on io_in_progress. The new descriptor_busy
counter is only modified by the kernel IO paths.
The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex)
and the handlers only hold descriptors_mutex briefly during the lookup,
so there is no deadlock risk and no impact on IO throughput. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate doorbell_offset in user queue creation
amdgpu_userq_get_doorbell_index() passes the user-provided
doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds
checking. An arbitrarily large doorbell_offset can cause the
calculated doorbell index to fall outside the allocated doorbell BO,
potentially corrupting kernel doorbell space.
Validate that doorbell_offset falls within the doorbell BO before
computing the BAR index, using u64 arithmetic to prevent overflow.
(cherry picked from commit de1ef4ffd70e1d15f0bf584fd22b1f28cbd5e2ec) |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: guard local VLAN-0 FDB helpers against NULL vlan group
When CONFIG_BRIDGE_VLAN_FILTERING is not set, br_vlan_group() and
nbp_vlan_group() return NULL (br_private.h stub definitions). The
BR_BOOLOPT_FDB_LOCAL_VLAN_0 toggle code is compiled unconditionally and
reaches br_fdb_delete_locals_per_vlan_port() and
br_fdb_insert_locals_per_vlan_port(), where the NULL vlan group pointer
is dereferenced via list_for_each_entry(v, &vg->vlan_list, vlist).
The observed crash is in the delete path, triggered when creating a
bridge with IFLA_BR_MULTI_BOOLOPT containing BR_BOOLOPT_FDB_LOCAL_VLAN_0
via RTM_NEWLINK. The insert helper has the same bug pattern.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7]
RIP: 0010:br_fdb_delete_locals_per_vlan+0x2b9/0x310
Call Trace:
br_fdb_toggle_local_vlan_0+0x452/0x4c0
br_toggle_fdb_local_vlan_0+0x31/0x80 net/bridge/br.c:276
br_boolopt_toggle net/bridge/br.c:313
br_boolopt_multi_toggle net/bridge/br.c:364
br_changelink net/bridge/br_netlink.c:1542
br_dev_newlink net/bridge/br_netlink.c:1575
Add NULL checks for the vlan group pointer in both helpers, returning
early when there are no VLANs to iterate. This matches the existing
pattern used by other bridge FDB functions such as br_fdb_add() and
br_fdb_delete(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix memory leak in airoha_qdma_rx_process()
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
The patch mentioned below changed cachefiles_bury_object() to expect 2
references to the 'rep' dentry. Three of the callers were changed to
use start_removing_dentry() which takes an extra reference so in those
cases the call gets the expected references.
However there is another call to cachefiles_bury_object() in
cachefiles_cull() which did not need to be changed to use
start_removing_dentry() and so was not properly considered.
It still passed the dentry with just one reference so the net result is
that a reference is lost.
To meet the expectations of cachefiles_bury_object(), cachefiles_cull()
must take an extra reference before the call. It will be dropped by
cachefiles_bury_object(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS,
This patch protects against invalid index out of bounds access to mw_sizes
When invalid access print message to user that configuration is not valid. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: k3-socinfo: Fix regmap leak on probe failure
The mmio regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'
All error handling paths lead to 'out' where many resources are freed.
Do it as well here instead of a direct return, otherwise 'log', 'ra' and
'log->one_page_buf' (at least) will leak. |
| In the Linux kernel, the following vulnerability has been resolved:
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com
On the case tmp_dcim=1, the index of buffer is miscalculated.
This generate a NULL pointer dereference later.
So let's fix the calcul and add a check to prevent this to reappear. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path. |
| Out of bounds memory access in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Insufficient policy enforcement in Passwords in Google Chrome prior to 147.0.7727.101 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Insufficient policy enforcement in WebUI in Google Chrome on Linux, Mac, Windows, ChromeOS prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient data validation in InterestGroups in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Insufficient policy enforcement in Downloads in Google Chrome prior to 148.0.7778.96 allowed a local attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |