| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fix use-after-free in fib_nhc_update_mtu()
fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but
RTNL does not serialize this walk with PMTU exception updates. The walk
uses rcu_dereference_protected() with a constant true condition without
holding fnhe_lock.
The following interleaving can therefore occur:
CPU 0 CPU 1
fib_nhc_update_mtu() update_or_create_fnhe()
load fnhe spin_lock_bh(&fnhe_lock)
fnhe_remove_oldest()
unlink fnhe
kfree_rcu(fnhe, rcu)
<quiescent state>
access fnhe after grace period
KASAN reported:
BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410
Read of size 8 at addr ffff888107d49000 by task poc/90
Call Trace:
fib_nhc_update_mtu+0x3df/0x410
fib_sync_mtu+0x7a/0xd0
fib_netdev_event+0x229/0x3f0
netif_set_mtu_ext+0x33a/0x570
dev_set_mtu+0x88/0x120
The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a
pair and other writers serialize them with fnhe_lock. RCU alone prevents
reclamation, but would still allow concurrent writers to leave a mixed
pair.
Walk the table under RCU and acquire fnhe_lock only while updating each
exception. RCU keeps the current entry alive while the short critical
section serializes its paired PMTU fields. This avoids holding the global
lock while scanning all 2048 buckets for every nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reallocate update replies for mismatched IDs
ovs_flow_cmd_new() preallocates the optional reply skb before it takes
ovs_mutex and before it knows which existing flow will be updated.
That is normally fine because the skb is sized from the request flow
identifier. That identifier also becomes the inserted flow's identifier.
For updates, however, a request with a UFID may miss the UFID lookup and
then fall back to the flow key lookup. That lookup can legitimately find
an existing key-identified flow. UFIDs are optional and the flow key is
the primary identifier.
For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's
identifier, not the request identifier used for the preallocation. A short
request UFID can therefore leave too little room for the key identifier.
The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the
update path.
Once the update target has been resolved, reallocate the reply skb if the
matched flow needs a larger reply than the request identifier allowed. Do
this before replacing the actions so the request can still fail cleanly if
the rare extra allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
packet: synchronize pressure clearing with ring reconfiguration
packet_set_ring() updates the RX ring state under sk_receive_queue.lock,
but used to publish the tpacket receive mode through po->prot_hook.func
after releasing that lock. packet_poll() and packet_recvmsg() can then
run the pressure clearing path after the ring has been cleared while
still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference
stale or NULL ring storage.
Move the existing receive hook assignment into the same
sk_receive_queue.lock section as the ring state update. Keep the
assignment otherwise unchanged, including on TX ring reconfiguration, to
avoid adding behavior changes that are not required for the fix.
Serialize packet_recvmsg() pressure clearing with the same queue lock
only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear
and the socket has moved away from tpacket_rcv, packet_set_ring() has
already detached the socket and waited for synchronize_net(), so no new
packet input can set the flag again.
packet_poll() already holds sk_receive_queue.lock, so it uses the new
unlocked helper directly. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: clear IPv4 options after rebasing tunnel ICMP errors
ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the
quoted original request before passing it to icmp_send(). However,
IPCB(skb)->opt still describes the outer IPv4 header.
A timestamp option in the outer header can therefore leave an offset
that points into the quoted transport header after the rebase.
__ip_options_echo() treats a byte at that stale location as the option
length and copies it into the fixed-size option storage on the
__icmp_send() stack, causing a stack out-of-bounds write.
Clear the stale option metadata after resetting the network header.
Keep the remaining control block fields, including the ingress
interface used by the ICMP response path. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - fix information leak in evdev_pass_values()
In evdev_pass_values(), the input_event structure is allocated on the
kernel stack and populated field-by-field. However, it is never fully
initialized. On architectures where struct input_event contains explicit
or implicit padding (such as the 32-bit __pad field on SPARC64), these
padding bytes are left uninitialized.
When this event structure is subsequently passed to the client buffer
and later copied to userspace, the uninitialized padding bytes leak
kernel stack memory, potentially exposing sensitive information.
Similar issues exist in __evdev_queue_syn_dropped and __pass_event.
Fix this by explicitly zeroing the entire event structure with memset()
before populating its fields. This ensures all padding bytes are cleared
before the data crosses the security boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - sanitize event type index when fetching event masks
The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK
ioctls is used to index the static counts array in evdev_get_mask_cnt()
and client evmasks array in evdev_get_mask().
While the event type is architecturally bounded by EV_CNT, speculative
execution may mispredict bounds checks and perform out-of-bounds loads.
Sanitize the event type index in evdev_get_mask_cnt() branchlessly using
array_index_mask_nospec(). This clamps the index to 0 for safe array
access and forces the returned count to 0 speculatively when the index
is out of bounds.
We do not need additional array_index_nospec() calls in evdev_get_mask()
because evdev_get_mask_cnt() speculatively forces the count (and
resulting xfer_size) to 0 for out-of-bounds types, preventing any
speculative memory access to client evmasks array. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref()
Incoming skbs passing through netfilter flowtable offload hooks (or XFRM
offload path) might already carry a ref-counted dst_entry assigned during
earlier RX or routing steps.
Calling skb_dst_set_noref() when skb already holds a ref-counted dst
overwrites skb->_skb_refdst, leaking the previous dst_entry reference
count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in
skb_dst_check_unset():
WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170
WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234
WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864
Drop any existing dst_entry reference with skb_dst_drop(skb) before
setting the non-referenced flowtable destination. |
| RansomLook contains a stored cross-site scripting (XSS) vulnerability in the cryptocurrency wallet detail view. Cryptocurrency addresses and blockchain names originating from external sources, including the public crowd-sourced ransomwhe.re feed, were stored without sufficient validation and later embedded directly into an inline JavaScript onclick handler.
Although Jinja HTML autoescaping was applied, it does not provide adequate protection when untrusted data is inserted into a JavaScript string inside an HTML attribute. HTML entities such as ' are decoded by the browser's HTML parser before the resulting attribute is interpreted as JavaScript. Consequently, a specially crafted cryptocurrency address containing quote characters and JavaScript syntax could escape the intended string literal and execute arbitrary JavaScript when a user clicked the affected wallet's CSV export button.
Because cryptocurrency information imported from an untrusted upstream could reach the vulnerable rendering path, exploitation may not require an authenticated RansomLook account if an attacker can introduce a malicious wallet record into a consumed external data source. Successful exploitation could allow attacker-controlled JavaScript to execute in the security context of the RansomLook web application, potentially exposing information accessible to the victim or performing actions with the victim's privileges.
The patch mitigates the issue by validating cryptocurrency addresses and blockchain identifiers before storage, restricting them to a safe character set, and replacing the inline JavaScript handler with data-* attributes and an external event listener so wallet values are treated strictly as data rather than executable JavaScript. |
| RansomLook contains an authorization weakness in the web-based configuration editor exposed through the /admin/config endpoint. The endpoint requires an authenticated session but does not perform an explicit privilege or administrator authorization check before allowing access to configuration-management functionality.
An authenticated low-privileged user able to access the endpoint can submit crafted configuration values that are written directly to the application's config/generic.json file. The affected functionality permits modification of configuration sections including notification, LDAP, SMTP, and general application settings. Successful exploitation could therefore allow an attacker to alter security-sensitive application behavior, redirect integrations or notifications, modify authentication-related configuration, disrupt external services, or render the RansomLook installation unavailable.
The configuration editor also operated on a configuration file containing sensitive values such as passwords, tokens, secrets, and API keys. Although the affected version contains logic intended to prevent recognized secret values from being returned to the browser, exposing configuration management through insufficiently authorized web functionality significantly increases the impact of a compromised or low-privileged account.
The patch resolves the issue by completely removing the /admin/config route and associated configuration-editing interface, preventing application configuration from being modified through the web UI. |
| A flaw was found in cri-o, where an arbitrary systemd property can be injected via a Pod annotation. Any user who can create a pod with an arbitrary annotation may perform an arbitrary action on the host system. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: zero shared page before exposing to userspace
bnxt_re_alloc_ucontext() allocates uctx->shpg via
__get_free_page(GFP_KERNEL). The buddy allocator does not zero pages
without __GFP_ZERO, so the page contains stale kernel data from
whatever object most recently freed it.
The page is then mapped into userspace via vm_insert_page() under
BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes
4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside
bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed
to userspace unsanitised, leaking kernel memory contents.
Any user with access to /dev/infiniband/uverbsX on a host with a
bnxt_re device (typically rdma group membership) can read this data
via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT.
Other shared pages in the same file already use get_zeroed_page()
correctly:
drivers/infiniband/hw/bnxt_re/ib_verbs.c
srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL);
cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL);
uctx->shpg is the only outlier. Bring it in line with the existing
convention by switching to get_zeroed_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: keep chunk->transport in step with the list it is queued on
__sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's
transmitted list without updating chunk->transport:
if (chunk->tsn_gap_acked) {
list_move_tail(&chunk->transmitted_list,
&transport->transmitted);
continue;
}
The chunk then sits on a live transport's list while chunk->transport still
names a different one. If that transport is removed - sctp_assoc_rm_peer()
from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk
is left with a dangling pointer. sctp_assoc_rm_peer() scrubs
peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on
neither.
The pointer is not followed while tsn_gap_acked is set. A SACK that
reneges on the TSN clears the flag, and the next SACK reaches
tchunk->transport->flight_size -= sctp_data_size(tchunk);
inside the freed transport. KASAN reports a slab-use-after-free read in
sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the
removal and the SACKs come from the association peer.
Set chunk->transport at the move. The ordinary resend path needs nothing:
it reaches its list_move_tail() only after sctp_packet_append_chunk()
returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the
chunk by then.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: __filemap_add_folio() restore index before retrying
In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is
applied repeatedly: each application modifies xas.xa_index, rounding it
down according to the split_order attempted at that stage: and if all goes
as intended, it eventually (or immediately) converges on an
xas_try_split() to the required folio_order, with xas.xa_index now the
same as index: then xas_store() puts the new folio into the xarray there.
But if a new node was needed, and GFP_NOWAIT allocation did not get one,
the lock is dropped, xas_nomem() used to allocate, and sequence retried.
If (that part of) the xarray is unchanged when the lock is reacquired, no
problem. But what if the conflict was meanwhile resolved by another
thread (perhaps even doing the same thing, inserting a folio at that same
index)? Isn't there a danger of now putting our folio into the xarray at
an intermediate rounded-down index? With !folio_contains() bug to follow,
when CONFIG_DEBUG_VM=y is checking for that.
Fix this with an xas_set_order() to restore the original xas.xa_index at
the bottom of the loop, so the retry does a full re-evaluation after
reacquiring the lock, and cannot reach xas_store() with the wrong index.
Production was suffering from rare SIGILLs and SIGSEGVs, executable text
found a page away from where it belonged, !folio_contains() bug hit when
debug enabled: symptoms not seen since this patch went in. |
| Unauthenticated Privilege Escalation in Digits <= 9.2 versions. |
| Unauthenticated Cross Site Scripting (XSS) in Tourmaster <= 5.4.9 versions. |
| A flaw has been found in Open5GS up to 2.8.0. This affects an unknown function of the file src/hss/hss-cx-path.c of the component HSS. This manipulation of the argument User-Name causes reachable assertion. The attack is possible to be carried out remotely. The exploit has been published and may be used. Patch name: c9abe09421eb99bbf1cd7862a3d375e58a4eb9e4. It is recommended to apply a patch to fix this issue. |
| phpIPAM before 1.8.2 contains an authentication bypass vulnerability in the REST API that allows unauthenticated attackers to gain full API access by exploiting an insecure object cache keying mechanism. The cache is keyed by lookup value alone without including the searched column, enabling an entry written during an app_id lookup to satisfy a subsequent app_code lookup, allowing attackers to use the numeric database row identifier as an API token to read, write, and delete all IP address management records. |
| RansomLook exposed sensitive operator-side scraping configuration through multiple unauthenticated API responses. Location records associated with ransomware groups and markets were returned largely verbatim to unauthenticated callers whenever the location itself was not marked as private.
These records could contain internal fields such as header, which may include authentication headers, session cookies, or other credentials used to access monitored websites; init_script, which may contain logic used to bypass CAPTCHA, anti-bot protections, or paywalls; and browser, which discloses details about the scraping environment.
An unauthenticated remote attacker could query the affected API endpoints and obtain these values. Leaked authentication material could potentially be replayed against the monitored service, while disclosure of scraping and bypass logic could allow site operators or other attackers to identify and defeat RansomLook's collection mechanisms.
The patch introduces an explicit allowlist of fields permitted in public location records and strips all operator-side fields before returning data to unauthenticated users.
The accompanying change from <string:postname> to <path:postname> appears to be a functional correction allowing legitimate post titles containing / and does not, based on this patch alone, represent the security issue. |
| An authenticated attacker with Editor access or alert.instances.external:write can submit an external Alertmanager alert containing a controlled generatorURL. The attacker is authorized to create the alert, but not to execute script in another user's Grafana session.
Grafana renders alert.generatorURL directly as the Alert Details See source LinkButton href without URL-scheme sanitization or a safe-protocol allowlist. The click interceptor's :// heuristic can be bypassed by placing :// inside a JavaScript comment. When a user with read access clicks See source, the browser executes attacker-controlled JavaScript in the Grafana origin with the clicking user's permissions. |
| RansomLook contains insufficient resource validation in the analysis PDF generation functionality. Analysis documents are converted from Markdown to HTML and passed to WeasyPrint for PDF rendering. Prior to the fix, WeasyPrint used its default URL fetcher, allowing resource references contained in an analysis to be resolved without restrictions.
An authenticated attacker able to create or modify an analysis could embed crafted resource references using schemes such as file:// or http://. When the analysis was subsequently rendered as PDF, WeasyPrint would process these references with the privileges and network access of the RansomLook server.
A malicious file:// reference could cause the renderer to access arbitrary files readable by the RansomLook process, potentially exposing sensitive configuration, credentials, or other local data through rendered resources. Network URLs could cause the server to initiate requests to localhost, internal network services, or external systems, resulting in server-side request forgery (SSRF) and potentially bypassing network-level access restrictions.
The patch introduces a dedicated WeasyPrint URL fetcher that permits only data: resources, the RansomLook report logo, and files contained within the analysis asset directory. Network resources and filesystem paths outside these explicitly permitted locations are rejected. |
