| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows DNS allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: make sure gc is properly stopped
Sashiko noticed that when destroying a set,
cancel_delayed_work_sync() was called while gc
calls queue_delayed_work() unconditionally which
can lead not to properly shutting down the gc. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: midi: Serialize output teardown with event_input
event_process_midi() borrows msynth->output_rfile.output and then
passes the substream to dump_midi() and snd_rawmidi_kernel_write()
without synchronizing with the output open/close transition.
midisynth_use() also publishes output_rfile before
snd_rawmidi_output_params() has finished.
The last midisynth_unuse() can therefore release the same rawmidi file
and free substream->runtime before snd_rawmidi_kernel_write1() takes
its runtime buffer reference. That leaves the event_input path using a
stale substream or runtime and can end in a NULL-deref or use-after-free.
Fix this with two pieces of synchronization. Keep a short IRQ-safe
spinlock only for publishing or clearing output_rfile and for pairing
the output snapshot with an snd_use_lock_t reference. Once
event_process_midi() has taken that in-flight reference, it drops the
spinlock before calling snd_seq_dump_var_event(), dump_midi(), or
snd_rawmidi_kernel_write(). midisynth_unuse() now detaches the visible
rawmidi file under the same spinlock, waits for the in-flight writers
to drain, and only then drains and releases the saved file.
midisynth_use() likewise opens into a local snd_rawmidi_file and
publishes it only after snd_rawmidi_output_params() succeeds.
The buggy scenario involves two paths, with each column showing the
order within that path:
event_input path: last unuse path:
1. event_process_midi() snapshots 1. midisynth_unuse() starts
output_rfile.output. tearing down output_rfile.
2. dump_midi() reaches 2. snd_rawmidi_kernel_release()
snd_rawmidi_kernel_write() closes the output file.
before runtime is pinned. 3. close_substream() frees
3. The callback keeps using substream->runtime.
the borrowed substream.
Validation reproduced this kernel report:
KASAN null-ptr-deref in snd_rawmidi_kernel_write1+0x56/0x360
RIP: 0033:0x7fde7dd0837f
RIP: 0010:snd_rawmidi_kernel_write1+0x56/0x360 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: use WRITE_ONCE() when changing lower socket callbacks
kcm_attach() replaces a live lower TCP socket's sk_data_ready and
sk_write_space callbacks with KCM handlers, and kcm_unattach() restores
them later. Those callback-pointer updates are still plain stores even
though the same fields can be read and invoked concurrently on other
CPUs.
If another CPU observes an older callback snapshot after the live field
has already been restored, callback execution can run with a mismatched
target and sk_user_data state, leading to stale or misdirected wakeups.
Use WRITE_ONCE() for the callback replacement and restore operations so
these shared callback fields follow the same visibility contract already
established by the earlier 4022 fixes. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cancel SSR work items during PCI shutdown
A reboot can crash the kernel if it overlaps with WLAN firmware crash
recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown
path while freeing DMA-backed MHI contexts.
Simplified trace:
dma_free_attrs
mhi_deinit_dev_ctxt [mhi]
ath11k_pci_power_down [ath11k_pci]
ath11k_pci_shutdown [ath11k_pci]
device_shutdown
kernel_restart
On the host side, SSR is driven by the MHI RDDM callback, which queues
reset_work to perform device recovery. reset_work power-cycles the device
by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The
power-down phase deinitializes MHI and frees DMA resources.
Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR
recovery flow. As a result, the shutdown path
(ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR
recovery sequence.
Fix this by canceling SSR-related work items during PCI shutdown, marking
the device as unregistering, and serializing the RDDM callback path that
checks and queues reset_work. This ensures that no new SSR recovery work
can be queued once teardown has started, and that any in-flight recovery
work is fully synchronized before device power-down, preventing MHI
teardown and DMA resource freeing from running more than once.
Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k
devices do not queue reset_work in normal SSR flows.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix tid_tx use-after-free on BA session stop
ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through
ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping
sta->lock:
ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */
...
spin_unlock_bh(&sta->lock);
if (start_txq)
ieee80211_agg_start_txq(sta, tid, false);
if (send_delba)
ieee80211_send_delba(..., tid_tx->ndp);
That read is not covered by an RCU read-side critical section, and it runs
in preemptible process context: both callers hold the wiphy mutex, reaching
it either from the ieee80211_ba_session_work() wiphy work or from
ieee80211_sta_tear_down_BA_sessions() during station teardown.
Softirqs can run in that window too, both from the local_bh_enable() that
ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU
callback can free tid_tx before the read.
Driving the function from a test module with the grace period forced into
that window, KASAN reports the read, and the free arrives on the ordinary
RCU softirq path:
BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400
Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10
[...]
Freed by task 57:
__kasan_slab_free+0x47/0x70
__rcu_free_sheaf_prepare+0x70/0x250
rcu_free_sheaf_nobarn+0x18/0x40
rcu_core+0x426/0x1310
handle_softirqs+0x144/0x590
__irq_exit_rcu+0xea/0x150
irq_exit_rcu+0x9/0x20
sysvec_apic_timer_interrupt+0x6b/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
send_delba is only set when tx_stop is set, which happens for
AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown -
session idle timeout, PTK rekey, suspend, HW reconfig - and not from a
peer's DELBA.
Read ndp into a local before the session is freed, while sta->lock is still
held. tid_tx->ndp has a single writer, in
ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here:
both paths are serialised by the wiphy mutex, and the session is already
marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only
tid_tx dereference left after ieee80211_remove_tid_tx() in this function.
[move/change the comment a bit to be more general not just on ndp,
initialize ndp directly] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD
addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD
via addrconf_dad_end(), which drops ifp->lock on return. The lock
is re-acquired after net_info_ratelimited(). A concurrent
ipv6_del_addr() can take the lock in that window, set ifp->state
to DEAD and run list_del_rcu(&ifp->if_list).
addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad:
and schedules a new dad_work. The work calls ipv6_del_addr()
again, hitting the already-poisoned list entry:
general protection fault: 0000 [#1] SMP NOPTI
CPU: 4 PID: 217 Comm: kworker/4:1
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:ipv6_del_addr+0xe9/0x280
RAX: dead000000000122
Call Trace:
addrconf_dad_stop+0x113/0x140
addrconf_dad_work+0x28c/0x430
process_one_work+0x1eb/0x3b0
worker_thread+0x4d/0x400
kthread+0x104/0x140
ret_from_fork+0x35/0x40
Fold the addrconf_dad_end() logic into addrconf_dad_failure() under
a single ifp->lock critical section. The STABLE_PRIVACY branch
temporarily drops ifp->lock around address regeneration, so at
lock_errdad: verify the state is still POSTDAD before transitioning
to ERRDAD; bail out otherwise to avoid overwriting a state set by
another path while the lock was released. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Push Notifications allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Backup Engine allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry
device_pasid_table_teardown() zeroes the 128-bit scalable-mode context
entry with context_clear_entry() while the Present bit is still set. This
creates a window where the hardware can fetch a torn entry, with some
fields already zeroed while Present is still set, leading to unpredictable
behavior or spurious faults. The context-cache invalidation is issued only
after the entry has been zeroed, and intel_pasid_free_table() then frees
the PASID directory pages, so the IOMMU can keep walking a stale Present=1
entry that points at freed memory.
While x86 provides strong write ordering, the compiler may reorder the two
64-bit writes to the entry, and the hardware fetch is not guaranteed to be
atomic with respect to multiple CPU writes.
Commit c1e4f1dccbe9d ("iommu/vt-d: Clear Present bit before tearing down
context entry") fixed this exact pattern in domain_context_clear_one() and
the copied-context path, but device_pasid_table_teardown() was not
converted.
Align it with the "Guidance to Software for Invalidations" in the VT-d
spec, Section 6.5.3.3, using the same ownership handshake as the sibling
fix: clear only the Present bit, flush it to the IOMMU, perform the
context-cache invalidation, and only then zero the rest of the entry. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: fix lockless traversals of ->s_children
Having the parent directory locked protects entries from removal
by another thread, but it does *not* protect cursors from being
moved around by lseek() - or freed, for that matter. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race in unix socket mediation when peer_path is used
The holding a reference to the peer_sk is not enough to ensure access
to the peer sk path. Accessing the path outside of the state lock
allows for a race with unix_release_sock(). Fix this by taking the
state lock and getting a reference to the path under lock.
Ideally for connected sockets we would cache this information so we
don't have to take the lock here. But for now just fix the race. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix lack of locking around modifications of net->cells_dyn_ino
Fix the lack of locking around modifications of net->cells_dyn_ino by
taking net->cells_lock exclusively. This also requires to cell to be
removed from net->cells_dyn_ino in afs_destroy_cell_work() rather than in
afs_cell_destroy() as the latter runs in RCU cleanup context and sleeping
locks cannot be taken there. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: wait for in-flight TLS handshake callback when cancel loses race
When wait_for_completion_interruptible_timeout() in
svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and
tls_handshake_cancel() then returns false, handshake_complete() has
won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and
is about to invoke svc_tcp_handshake_done(), but the callback's
side effects on xpt_flags and on svsk->sk_handshake_done have not
yet committed.
The current code reads xpt_flags immediately to decide whether the
session succeeded. Two races result.
If the callback has executed set_bit(XPT_TLS_SESSION) but not yet
clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session,
enqueues the transport, and returns. svc_xprt_received() then
clears XPT_BUSY, a worker thread picks the transport up, the
dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set,
and xpo_handshake is invoked a second time. That svc_tcp_handshake()
calls init_completion(&svsk->sk_handshake_done) while the original
callback concurrently calls complete_all() on it, corrupting the
embedded swait_queue.
If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet
entered svc_tcp_handshake_done(), svc_tcp_handshake() reads
XPT_TLS_SESSION as clear and tears the connection down even though
the handshake is about to succeed.
Wait for the callback to commit before inspecting xpt_flags. The
completion is guaranteed to fire because handshake_complete()
invokes svc_tcp_handshake_done() unconditionally once it has set
HANDSHAKE_F_REQ_COMPLETED. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix division by zero in initialize_timer()
A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set
the backing snd_timer's hardware resolution to an arbitrary 64-bit value
via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero.
When such a timer is bound to a sequencer queue, initialize_timer()
computes the tick period as
tmr->ticks = 1000000000 / (r * freq);
where r is that user-controlled resolution and freq is the sequencer
update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250).
A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for
any even freq, including DEFAULT_FREQUENCY (1000), so the division faults
with a divide-by-zero.
The division runs under tmr->lock with interrupts disabled, so the oops
leaves the spinlock held and hangs the CPU. It is reachable by an
unprivileged user with access to /dev/snd/timer and /dev/snd/seq.
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+
RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0
snd_seq_timer_start+0x15e/0x2b0
snd_seq_control_queue+0x56f/0xba0
snd_seq_write+0x3e0/0x730
Reject an overflowing product with check_mul_overflow() and fall back to
a single tick, which also avoids feeding a wrapped-but-nonzero divisor
(e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small
value) into the period computation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: sja1105: round up PTP perout pin duration
pin_duration is converted from the user-provided period to SJA1105
clock ticks and is later passed as the cycle_time argument to
future_base_time().
Very small period values may become zero after the conversion,
which can lead to a division by zero in future_base_time().
Round zero pin_duration up to 1 tick so that the smallest unsupported
periods use the minimum non-zero hardware duration instead of passing
zero to future_base_time(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero
Sashiko reports:
In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function
calculates the fan RPM using the tachometer value. However, it does not
check if the tachometer value is zero before performing the division.
If the hardware reports a tachometer value of 0 (which can happen due to
an extremely fast pulse, a stuck edge, or a hardware glitch), the
calculated tach_div evaluates to 0. The subsequent call to do_div() with
tach_div as the divisor triggers a divide-by-zero exception, leading to
a kernel panic.
Check the divisor against zero to fix the problem. |
