| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix race condition in AF_XDP generic RX path
Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.
RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.
Protect both queues by acquiring spinlock in shared
xsk_buff_pool.
Lock contention may be minimized in the future by some
per-thread FQ buffering.
It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
of xsk_release() or xsk_unbind_dev(),
however this will not cause any data races or
race conditions. xsk_unbind_dev() removes xdp
socket from all maps and waits for completion
of all outstanding rx operations. Packets in
RX path will either complete safely or drop. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but
we may have scheduled task work via io_uring_cmd_complete_in_task() for
dispatching request, then kernel crash can be triggered.
Fix it by not trying to canceling the command if ublk block request is
started. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Fix race between unprepare and queue_buf
A client driver may use mhi_unprepare_from_transfer() to quiesce
incoming data during the client driver's tear down. The client driver
might also be processing data at the same time, resulting in a call to
mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs
after mhi_unprepare_from_transfer() has torn down the channel, a panic
will occur due to an invalid dereference leading to a page fault.
This occurs because mhi_gen_tre() does not verify the channel state
after locking it. Fix this by having mhi_gen_tre() confirm the channel
state is valid, or return error to avoid accessing deinitialized data.
[mani: added stable tag] |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
With the introduction of Grant Table v2 came the requirement to be able to
switch between versions. Switching from v1 to v2 reduces the number of
valid grant references, as a bigger shared entry structure is then needed
while the shared table doesn't change size. Switching from v2 back to v1
the status frames, which are separate in v2, go away.
Code holding, but intermediately dropping and then re-acquiring the grant
table lock, sometimes wrongly assumes that said properties wouldn't change
across the window in time where the lock is not being held.
The v1 -> v2 issue is CVE-2026-62435.
The v2 -> v1 issue is CVE-2026-62436. |
| The EVTCHNOP_expand_array hypercall checks for whether FIFO event
channels are enabled, but without holding the correct lock. It can race
with EVTCHNOP_reset, resulting in dereferencing a NULL pointer. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
With the introduction of Grant Table v2 came the requirement to be able to
switch between versions. Switching from v1 to v2 reduces the number of
valid grant references, as a bigger shared entry structure is then needed
while the shared table doesn't change size. Switching from v2 back to v1
the status frames, which are separate in v2, go away.
Code holding, but intermediately dropping and then re-acquiring the grant
table lock, sometimes wrongly assumes that said properties wouldn't change
across the window in time where the lock is not being held.
The v1 -> v2 issue is CVE-2026-62435.
The v2 -> v1 issue is CVE-2026-62436. |
| Accessing the vNUMA configuration data of a guest is still possible when
domain destruction has already started. The cleaning up of that
configuration information is not synchronized with its retrieval by a
device model controlling the guest. |
| Accesses to the CMOS memory contents are done using an indirect IO port
pair. Therefore Xen needs to cache the guest chosen index, and one of
the usages of the index didn't take the necessary locking to avoid
concurrent changes. As a result, a guest could change the index after
it being checked, causing a subsequent out-of-bound read access to the
contents of an array. |
| Race in USB in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| SurrealDB versions before 3.1.0 contain a time-of-check/time-of-use race condition in the HTTP /rpc endpoint that allows unauthenticated requests to inherit authenticated session state. Unauthenticated attackers can send concurrent requests to the /rpc endpoint while legitimate authenticated traffic is active to execute operations with hijacked user privileges. |
| Flameshot is powerful yet simple to use screenshot software. Prior to 14.0.0, the Open With feature wrote screenshots to a predictable temporary path and followed symlinks, creating a time-of-check to time-of-use race that allowed a local unprivileged attacker on the same machine to pre-plant a symlink and cause Flameshot to write PNG data through it, overwriting any file the victim user could write. This issue is fixed in version 14.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix race between ICReq handling and queue teardown
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: annotate data-races around hdev->req_status
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering). |
| Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.5, the credit payment implementation in app/Livewire/Invoices/Show.php executes a pessimistic row lock (lockForUpdate()) outside of an active database transaction. Because MySQL/MariaDB requires an enclosing transaction to enforce row-level locks, the guard is ineffective. Concurrent payment requests can exploit this race condition to read the same credit balance simultaneously, allowing users to pay multiple invoices using the same credit balance. In database systems like MySQL, a row lock only works inside a formal transaction; without one, the lock is completely ignored. Because there is no active lock, two payment requests sent at the exact same millisecond can look at the database at the same time. Both requests see the original credit balance, decide it is sufficient, and approve the payment. Because the payment processes successfully through ExtensionHelper::addPayment(), the application provisions the corresponding services or digital goods, resulting in direct financial or resource loss to the platform. This issue has been fixed in version 1.5.5. |
| A vulnerability was identified in Sipeed PicoClaw up to 0.2.9. The impacted element is the function ExecTool.executeRun of the file pkg/agent/pipeline_execute.go. The manipulation of the argument cwe leads to time-of-check time-of-use. The attack must be carried out locally. The exploit is publicly available and might be used. The reported GitHub issue was closed automatically with the label "not planned" by a bot. |
| A flaw has been found in django-tastypie up to 0.15.1. The affected element is the function CacheThrottle/CacheDBThrottle of the file tastypie/throttle.py. This manipulation causes race condition. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitability is described as difficult. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in allegro up to bcf65b994ef29fb3fc2e10b660e6288723d5209e. This impacts the function AssetLastHostname.increment_hostname of the file src/ralph/assets/models/assets.py of the component Hostname Allocation Handler. Executing a manipulation of the argument counter can lead to race condition. Attacks of this nature are highly complex. The exploitability is said to be difficult. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in awesto django-shop up to 1.2.4. Affected is an unknown function of the file shop/models/inventory.py of the component Purchase Stock Handler. The manipulation leads to race condition. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is told to be difficult. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows App Store allows an unauthorized attacker to elevate privileges over a network. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Microsoft Windows App Store allows an authorized attacker to elevate privileges locally. |
