| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An insufficient session expiration vulnerability [CWE-613] vulnerability in Fortinet FortiOS 7.4.0, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions allows attacker to maintain access to network resources via an active SSLVPN session not terminated after a user's password change under particular conditions outside of the attacker's control |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop
With this refcnt added in sctp_stream_priorities, we don't need to
traverse all streams to check if the prio is used by other streams
when freeing one stream's prio in sctp_sched_prio_free_sid(). This
can avoid a nested loop (up to 65535 * 65535), which may cause a
stuck as Ying reported:
watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136]
Call Trace:
<TASK>
sctp_sched_prio_free_sid+0xab/0x100 [sctp]
sctp_stream_free_ext+0x64/0xa0 [sctp]
sctp_stream_free+0x31/0x50 [sctp]
sctp_association_free+0xa5/0x200 [sctp]
Note that it doesn't need to use refcount_t type for this counter,
as its accessing is always protected under the sock lock.
v1->v2:
- add a check in sctp_sched_prio_set to avoid the possible prio_head
refcnt overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix deadlock in tc route query code
Cited commit causes ABBA deadlock[0] when peer flows are created while
holding the devcom rw semaphore. Due to peer flows offload implementation
the lock is taken much higher up the call chain and there is no obvious way
to easily fix the deadlock. Instead, since tc route query code needs the
peer eswitch structure only to perform a lookup in xarray and doesn't
perform any sleeping operations with it, refactor the code for lockless
execution in following ways:
- RCUify the devcom 'data' pointer. When resetting the pointer
synchronously wait for RCU grace period before returning. This is fine
since devcom is currently only used for synchronization of
pairing/unpairing of eswitches which is rare and already expensive as-is.
- Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has
already been used in some unlocked contexts without proper
annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't
an issue since all relevant code paths checked it again after obtaining the
devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as
"best effort" check to return NULL when devcom is being unpaired. Note that
while RCU read lock doesn't prevent the unpaired flag from being changed
concurrently it still guarantees that reader can continue to use 'data'.
- Refactor mlx5e_tc_query_route_vport() function to use new
mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock.
[0]:
[ 164.599612] ======================================================
[ 164.600142] WARNING: possible circular locking dependency detected
[ 164.600667] 6.3.0-rc3+ #1 Not tainted
[ 164.601021] ------------------------------------------------------
[ 164.601557] handler1/3456 is trying to acquire lock:
[ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.603078]
but task is already holding lock:
[ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.604459]
which lock already depends on the new lock.
[ 164.605190]
the existing dependency chain (in reverse order) is:
[ 164.605848]
-> #1 (&comp->sem){++++}-{3:3}:
[ 164.606380] down_read+0x39/0x50
[ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core]
[ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core]
[ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core]
[ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core]
[ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core]
[ 164.610741] tc_setup_cb_add+0xd4/0x200
[ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 164.611661] fl_change+0xc95/0x18a0 [cls_flower]
[ 164.612116] tc_new_tfilter+0x3fc/0xd20
[ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0
[ 164.612936] netlink_rcv_skb+0x54/0x100
[ 164.613339] netlink_unicast+0x190/0x250
[ 164.613746] netlink_sendmsg+0x245/0x4a0
[ 164.614150] sock_sendmsg+0x38/0x60
[ 164.614522] ____sys_sendmsg+0x1d0/0x1e0
[ 164.614934] ___sys_sendmsg+0x80/0xc0
[ 164.615320] __sys_sendmsg+0x51/0x90
[ 164.615701] do_syscall_64+0x3d/0x90
[ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 164.616568]
-> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}:
[ 164.617210] __lock_acquire+0x159e/0x26e0
[ 164.617638] lock_acquire+0xc2/0x2a0
[ 164.618018] __mutex_lock+0x92/0xcd0
[ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.618943] post_process_attr+0x153/0x2d0 [
---truncated--- |
| A vulnerability was determined in Open5GS up to 2.7.6. This affects the function sgwc_s11_handle_create_indirect_data_forwarding_tunnel_request of the file /src/sgwc/s11-handler.c. Executing a manipulation can lead to reachable assertion. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The issue report is flagged as already-fixed. |
| A vulnerability was identified in Open5GS up to 2.7.5. This vulnerability affects the function sgwc_bearer_add of the file src/sgwc/context.c. The manipulation leads to reachable assertion. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The issue report is flagged as already-fixed. |
| Out-of-bounds write vulnerability in the file system module.
Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| A vulnerability has been found in FAST/TOOLS provided by Yokogawa Electric Corporation.
This product does not
properly validate request headers. When an attacker inserts an invalid host
header, users could be redirected to malicious sites.
The
affected products and versions are as follows: FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to
R10.04 |
| In the context switch logic Xen attempts to skip an IBPB in the case of
a vCPU returning to a CPU on which it was the previous vCPU to run.
While safe for Xen's isolation between vCPUs, this prevents the guest
kernel correctly isolating between tasks. Consider:
1) vCPU runs on CPU A, running task 1.
2) vCPU moves to CPU B, idle gets scheduled on A. Xen skips IBPB.
3) On CPU B, guest kernel switches from task 1 to 2, issuing IBPB.
4) vCPU moves back to CPU A. Xen skips IBPB again.
Now, task 2 is running on CPU A with task 1's training still in the BTB. |
| Spree is an open source e-commerce solution built with Ruby on Rails. A critical IDOR vulnerability exists in Spree Commerce's guest checkout flow that allows any guest user to bind arbitrary guest addresses to their order by manipulating address ID parameters. This enables unauthorized access to other guests' personally identifiable information (PII) including names, addresses and phone numbers. The vulnerability bypasses existing ownership validation checks and affects all guest checkout transactions. This vulnerability is fixed in 4.10.3, 5.0.8, 5.1.10, 5.2.7, and 5.3.2. |
| Spree is an open source e-commerce solution built with Ruby on Rails. Prior to versions 5.0.8, 5.1.10, 5.2.7, and 5.3.2, unauthenticated users can view completed guest orders by Order ID. This issue may lead to disclosure of PII of guest users (including names, addresses and phone numbers). This issue has been patched in versions 5.0.8, 5.1.10, 5.2.7, and 5.3.2. |
| Payload is a free and open source headless content management system. Prior to 3.74.0, a cross-collection Insecure Direct Object Reference (IDOR) vulnerability exists in the payload-preferences internal collection. In multi-auth collection environments using Postgres or SQLite with default serial/auto-increment IDs, authenticated users from one auth collection can read and delete preferences belonging to users in different auth collections when their numeric IDs collide. This vulnerability has been patched in v3.74.0. |
| client-certificate-auth is middleware for Node.js implementing client SSL certificate authentication/authorization. Versions 0.2.1 and 0.3.0 of client-certificate-auth contain an open redirect vulnerability. The middleware unconditionally redirects HTTP requests to HTTPS using the unvalidated Host header, allowing an attacker to redirect users to arbitrary domains. This vulnerability is fixed in 1.0.0. |
| Claude Code is an agentic coding tool. Prior to version 2.1.7, Claude Code failed to strictly enforce deny rules configured in settings.json when accessing files through symbolic links. If a user explicitly denied Claude Code access to a file (such as /etc/passwd) and Claude Code had access to a symbolic link pointing to that file, it was possible for Claude Code to read the restricted file through the symlink without triggering deny rule enforcement. This issue has been patched in version 2.1.7. |
| Claude Code is an agentic coding tool. Prior to version 2.1.2, Claude Code's bubblewrap sandboxing mechanism failed to properly protect the .claude/settings.json configuration file when it did not exist at startup. While the parent directory was mounted as writable and .claude/settings.local.json was explicitly protected with read-only constraints, settings.json was not protected if it was missing. This allowed malicious code running inside the sandbox to create this file and inject persistent hooks (such as SessionStart commands) that would execute with host privileges when Claude Code was restarted. This issue has been patched in version 2.1.2. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2, the ast_xml_open() function in xml.c parses XML documents using libxml with unsafe parsing options that enable entity expansion and XInclude processing. Specifically, it invokes xmlReadFile() with the XML_PARSE_NOENT flag and later processes XIncludes via xmlXIncludeProcess().If any untrusted or user-supplied XML file is passed to this function, it can allow an attacker to trigger XML External Entity (XXE) or XInclude-based local file disclosure, potentially exposing sensitive files from the host system. This can also be triggered in other cases in which the user is able to supply input in xml format that triggers the asterisk process to parse it. This issue has been patched in versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2. |
| OpenProject is an open-source, web-based project management software. Prior to 17.0.2, the drag&drop handler moving an agenda item to a different section was not properly checking if the target meeting section is part of the same meeting (or is the backlog, in case of recurring meetings). This allowed an attacker to move a meeting agenda item into a different meeting. The attacker did not get access to meetings, but they could add arbitrary agenda items, that could cause confusions. The vulnerability is fixed in 17.0.2. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to 2.3.1.4, SrcPixel and DestPixel stack buffers overlap in CIccTagMultiProcessElement::Apply() int IccTagMPE.cpp. This vulnerability is fixed in 2.3.1.4. |
| Tanium addressed a denial of service vulnerability in Tanium Client. |
| Mitigation bypass in the Privacy: Anti-Tracking component. This vulnerability affects Firefox < 147.0.2. |
| A flaw was found in Red Hat Satellite (Foreman component). This vulnerability allows an authenticated user with edit_settings permissions to achieve arbitrary command execution on the underlying operating system via insufficient server-side validation of command whitelisting. |
