| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: Fix memory leak in USB bulk transport
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux
Test Project (LTP). The following bytes were mainly observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data,
the code extracts/validates the CSW from the sg buffer, but fails to clear
it afterwards. This leaves status protocol data in srb's transfer buffer,
such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can
lead to USB protocols leaks to user space through SCSI generic (/dev/sg*)
interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately
after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero-
ing pages at allocation time, this leak occurs after allocation, when USB
protocol data is written to already-allocated sg pages. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedf: Fix NULL dereference in error handling
Smatch reported:
drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues()
warn: missing unwind goto?
At this point in the function, nothing has been allocated so we can return
directly. In particular the "qedf->global_queues" have not been allocated
so calling qedf_free_global_queues() will lead to a NULL dereference when
we check if (!gl[i]) and "gl" is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6/sit: use DEV_STATS_INC() to avoid data-races
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.
This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.
While original KCSAN report was about tx path, rx path has the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: marvell/octeontx - prevent integer overflows
The "code_length" value comes from the firmware file. If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself. Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.
The "code_length * 2" can overflow. The round_up(ucode_size, 16) +
sizeof() expression can overflow too. Prevent these overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: fix NULL pointer dereference
vduse_vdpa_set_vq_affinity callback can be called
with NULL value as cpu_mask when deleting the vduse
device.
This patch resets virtqueue's IRQ affinity mask value
to set all CPUs instead of dereferencing NULL cpu_mask.
[ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 4760.959110] #PF: supervisor read access in kernel mode
[ 4760.964247] #PF: error_code(0x0000) - not-present page
[ 4760.969385] PGD 0 P4D 0
[ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4
[ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020
[ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130
[ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66
[ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246
[ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400
[ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898
[ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000
[ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000
[ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10
[ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000
[ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0
[ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4761.088909] PKRU: 55555554
[ 4761.091620] Call Trace:
[ 4761.094074] <TASK>
[ 4761.096180] ? __die+0x1f/0x70
[ 4761.099238] ? page_fault_oops+0x171/0x4f0
[ 4761.103340] ? exc_page_fault+0x7b/0x180
[ 4761.107265] ? asm_exc_page_fault+0x22/0x30
[ 4761.111460] ? memcpy_orig+0xc5/0x130
[ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse]
[ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net]
[ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net]
[ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net]
[ 4761.136580] virtio_dev_remove+0x3a/0x90
[ 4761.140509] device_release_driver_internal+0x19b/0x200
[ 4761.145742] bus_remove_device+0xc2/0x130
[ 4761.149755] device_del+0x158/0x3e0
[ 4761.153245] ? kernfs_find_ns+0x35/0xc0
[ 4761.157086] device_unregister+0x13/0x60
[ 4761.161010] unregister_virtio_device+0x11/0x20
[ 4761.165543] device_release_driver_internal+0x19b/0x200
[ 4761.170770] bus_remove_device+0xc2/0x130
[ 4761.174782] device_del+0x158/0x3e0
[ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa]
[ 4761.183336] device_unregister+0x13/0x60
[ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa] |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
"struct sdca_control" declares "values" field as integer array.
But the memory allocated to it is of char array. This causes
crash for sdca_parse_function API. This patch addresses the
issue by allocating correct data size. |
| In the Linux kernel, the following vulnerability has been resolved:
net/net_failover: fix txq exceeding warning
The failover txq is inited as 16 queues.
when a packet is transmitted from the failover device firstly,
the failover device will select the queue which is returned from
the primary device if the primary device is UP and running.
If the primary device txq is bigger than the default 16,
it can lead to the following warning:
eth0 selects TX queue 18, but real number of TX queues is 16
The warning backtrace is:
[ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1
[ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014
[ 32.147730] Call Trace:
[ 32.147971] <TASK>
[ 32.148183] dump_stack_lvl+0x48/0x70
[ 32.148514] dump_stack+0x10/0x20
[ 32.148820] netdev_core_pick_tx+0xb1/0xe0
[ 32.149180] __dev_queue_xmit+0x529/0xcf0
[ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0
[ 32.149967] ip_finish_output2+0x278/0x560
[ 32.150327] __ip_finish_output+0x1fe/0x2f0
[ 32.150690] ip_finish_output+0x2a/0xd0
[ 32.151032] ip_output+0x7a/0x110
[ 32.151337] ? __pfx_ip_finish_output+0x10/0x10
[ 32.151733] ip_local_out+0x5e/0x70
[ 32.152054] ip_send_skb+0x19/0x50
[ 32.152366] udp_send_skb.isra.0+0x163/0x3a0
[ 32.152736] udp_sendmsg+0xba8/0xec0
[ 32.153060] ? __folio_memcg_unlock+0x25/0x60
[ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 32.153854] ? sock_has_perm+0x85/0xa0
[ 32.154190] inet_sendmsg+0x6d/0x80
[ 32.154508] ? inet_sendmsg+0x6d/0x80
[ 32.154838] sock_sendmsg+0x62/0x70
[ 32.155152] ____sys_sendmsg+0x134/0x290
[ 32.155499] ___sys_sendmsg+0x81/0xc0
[ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0
[ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0
[ 32.156649] ? get_random_u16+0x69/0xf0
[ 32.156989] ? __fget_light+0xcf/0x110
[ 32.157326] __sys_sendmmsg+0xc4/0x210
[ 32.157657] ? __sys_connect+0xb7/0xe0
[ 32.157995] ? __audit_syscall_entry+0xce/0x140
[ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0
[ 32.158820] __x64_sys_sendmmsg+0x24/0x30
[ 32.159171] do_syscall_64+0x38/0x90
[ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix that by reducing txq number as the non-existent primary-dev does. |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: Only force 030 bus error if PC not in exception table
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix improper check of dentry.stream.valid_size
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range
Because of what seems to be a typo, a 6Ghz-only phy for which the BDF
does not allow the 7115Mhz channel will fail to register:
WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954
Modules linked in: ath11k_pci sbsa_gwdt
CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9
Hardware name: Freebox V7R Board (DT)
Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : wiphy_register+0x914/0x954
lr : ieee80211_register_hw+0x67c/0xc10
sp : ffffff800b123aa0
x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418
x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168
x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014
x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f
x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd
x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718
x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006
x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284
x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
wiphy_register+0x914/0x954
ieee80211_register_hw+0x67c/0xc10
ath11k_mac_register+0x7c4/0xe10
ath11k_core_qmi_firmware_ready+0x1f4/0x570
ath11k_qmi_driver_event_work+0x198/0x590
process_one_work+0x1b8/0x328
worker_thread+0x6c/0x414
kthread+0x100/0x104
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22
ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22
ath11k_pci 0002:01:00.0: failed to create pdev core: -22 |
| In the Linux kernel, the following vulnerability has been resolved:
hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
The "map_sz" is the number of elements in the "m" array so the >
comparison needs to be changed to >= to prevent an out of bounds
read. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: sisusbvga: Add endpoint checks
The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver:
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95
RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003
R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline]
sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379
sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline]
sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline]
sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177
sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869
...
The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types. This can be fixed by adding a simple check of
the endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix blktrace debugfs entries leakage
Commit 99d055b4fd4b ("block: remove per-disk debugfs files in
blk_unregister_queue") moves blk_trace_shutdown() from
blk_release_queue() to blk_unregister_queue(), this is safe if blktrace
is created through sysfs, however, there is a regression in corner
case.
blktrace can still be enabled after del_gendisk() through ioctl if
the disk is opened before del_gendisk(), and if blktrace is not shutdown
through ioctl before closing the disk, debugfs entries will be leaked.
Fix this problem by shutdown blktrace in disk_release(), this is safe
because blk_trace_remove() is reentrant. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ov5675: Fix memleak in ov5675_init_controls()
There is a kmemleak when testing the media/i2c/ov5675.c with bpf mock
device:
AssertionError: unreferenced object 0xffff888107362160 (size 16):
comm "python3", pid 277, jiffies 4294832798 (age 20.722s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000abe7d67c>] __kmalloc_node+0x44/0x1b0
[<000000008a725aac>] kvmalloc_node+0x34/0x180
[<000000009a53cd11>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
[<0000000055b46db0>] ov5675_probe+0x38b/0x897 [ov5675]
[<00000000153d886c>] i2c_device_probe+0x28d/0x680
[<000000004afb7e8f>] really_probe+0x17c/0x3f0
[<00000000ff2f18e4>] __driver_probe_device+0xe3/0x170
[<000000000a001029>] driver_probe_device+0x49/0x120
[<00000000e39743c7>] __device_attach_driver+0xf7/0x150
[<00000000d32fd070>] bus_for_each_drv+0x114/0x180
[<000000009083ac41>] __device_attach+0x1e5/0x2d0
[<0000000015b4a830>] bus_probe_device+0x126/0x140
[<000000007813deaf>] device_add+0x810/0x1130
[<000000007becb867>] i2c_new_client_device+0x386/0x540
[<000000007f9cf4b4>] of_i2c_register_device+0xf1/0x110
[<00000000ebfdd032>] of_i2c_notify+0xfc/0x1f0
ov5675_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Correct device removal for multi-actuator devices
Correct device count for multi-actuator drives which can cause kernel
panics. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: ensure allocated iovec gets cleared for early failure
A previous commit reused the recyling infrastructure for early cleanup,
but this is not enough for the case where our internal caches have
overflowed. If this happens, then the allocated iovec can get leaked if
the request is also aborted early.
Reinstate the previous forced free of the iovec for that situation. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: use proper req destructor for IPv6
Before, only the destructor from TCP request sock in IPv4 was called
even if the subflow was IPv6.
It is important to use the right destructor to avoid memory leaks with
some advanced IPv6 features, e.g. when the request socks contain
specific IPv6 options. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sunplus: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
1. the memory allocated in mmc_alloc_host() will be leaked
2. null-ptr-deref will happen when calling mmc_remove_host()
in remove function spmmc_drv_remove() because deleting not
added device.
Fix this by checking the return value of mmc_add_host(). Moreover,
I fixed the error handling path of spmmc_drv_probe() to clean up. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
I got a null-ptr-defer error report when I do the following tests
on the qemu platform:
make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m,
CONFIG_SND_MTS64=m
Then making test scripts:
cat>test_mod1.sh<<EOF
modprobe snd-mts64
modprobe snd-mts64
EOF
Executing the script, perhaps several times, we will get a null-ptr-defer
report, as follow:
syzkaller:~# ./test_mod.sh
snd_mts64: probe of snd_mts64.0 failed with error -5
modprobe: ERROR: could not insert 'snd_mts64': No such device
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6
Call Trace:
<IRQ>
snd_mts64_interrupt+0x24/0xa0 [snd_mts64]
parport_irq_handler+0x37/0x50 [parport]
__handle_irq_event_percpu+0x39/0x190
handle_irq_event_percpu+0xa/0x30
handle_irq_event+0x2f/0x50
handle_edge_irq+0x99/0x1b0
__common_interrupt+0x5d/0x100
common_interrupt+0xa0/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30
parport_claim+0xbd/0x230 [parport]
snd_mts64_probe+0x14a/0x465 [snd_mts64]
platform_probe+0x3f/0xa0
really_probe+0x129/0x2c0
__driver_probe_device+0x6d/0xc0
driver_probe_device+0x1a/0xa0
__device_attach_driver+0x7a/0xb0
bus_for_each_drv+0x62/0xb0
__device_attach+0xe4/0x180
bus_probe_device+0x82/0xa0
device_add+0x550/0x920
platform_device_add+0x106/0x220
snd_mts64_attach+0x2e/0x80 [snd_mts64]
port_check+0x14/0x20 [parport]
bus_for_each_dev+0x6e/0xc0
__parport_register_driver+0x7c/0xb0 [parport]
snd_mts64_module_init+0x31/0x1000 [snd_mts64]
do_one_initcall+0x3c/0x1f0
do_init_module+0x46/0x1c6
load_module+0x1d8d/0x1e10
__do_sys_finit_module+0xa2/0xf0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 1 seconds..
The mts wa not initialized during interrupt, we add check for
mts to fix this bug. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix DMA transfer direction
When CONFIG_DMA_API_DEBUG is selected, while running the crypto self
test on the QAT crypto algorithms, the function add_dma_entry() reports
a warning similar to the one below, saying that overlapping mappings
are not supported. This occurs in tests where the input and the output
scatter list point to the same buffers (i.e. two different scatter lists
which point to the same chunks of memory).
The logic that implements the mapping uses the flag DMA_BIDIRECTIONAL
for both the input and the output scatter lists which leads to
overlapped write mappings. These are not supported by the DMA layer.
Fix by specifying the correct DMA transfer directions when mapping
buffers. For in-place operations where the input scatter list
matches the output scatter list, buffers are mapped once with
DMA_BIDIRECTIONAL, otherwise input buffers are mapped using the flag
DMA_TO_DEVICE and output buffers are mapped with DMA_FROM_DEVICE.
Overlapping a read mapping with a write mapping is a valid case in
dma-coherent devices like QAT.
The function that frees and unmaps the buffers, qat_alg_free_bufl()
has been changed accordingly to the changes to the mapping function.
DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported
WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270
...
Call Trace:
dma_map_page_attrs+0x82/0x2d0
? preempt_count_add+0x6a/0xa0
qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat]
qat_alg_aead_dec+0x71/0x250 [intel_qat]
crypto_aead_decrypt+0x3d/0x70
test_aead_vec_cfg+0x649/0x810
? number+0x310/0x3a0
? vsnprintf+0x2a3/0x550
? scnprintf+0x42/0x70
? valid_sg_divisions.constprop.0+0x86/0xa0
? test_aead_vec+0xdf/0x120
test_aead_vec+0xdf/0x120
alg_test_aead+0x185/0x400
alg_test+0x3d8/0x500
? crypto_acomp_scomp_free_ctx+0x30/0x30
? __schedule+0x32a/0x12a0
? ttwu_queue_wakelist+0xbf/0x110
? _raw_spin_unlock_irqrestore+0x23/0x40
? try_to_wake_up+0x83/0x570
? _raw_spin_unlock_irqrestore+0x23/0x40
? __set_cpus_allowed_ptr_locked+0xea/0x1b0
? crypto_acomp_scomp_free_ctx+0x30/0x30
cryptomgr_test+0x27/0x50
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30 |