| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Jenkins 2.587 and earlier, LTS 2.580.1 and earlier provides an HTTP endpoint that loads agents by name without validating the name, allowing attackers with Overall/Read permission to load any config.xml file on the controller file system as an agent configuration, and to overwrite an arbitrary config.xml file when that agent is saved, potentially resulting in arbitrary code execution. |
| HTTP::Body versions before 1.23_01 for Perl leave the temporary file of an incomplete multipart upload on disk.
The multipart parser creates a temporary file as soon as a file part starts, but adds it to the upload list only when the part completes. Uploads are only ever deleted from that list, by the cleanup option or by the caller, so a body that ends inside a file part leaves its temporary file where nothing can find it.
A remote attacker can fill the temporary directory by repeating such requests, leaving one file behind for each. |
| HTTP::Body versions before 1.23_01 for Perl allow memory and temporary file exhaustion via an unlimited number of form fields and multipart parts.
The urlencoded parser splits the whole body on its separators at once, creating one scalar per separator before any field is stored. This costs about 90 bytes of memory per separator byte. The multipart parser creates a temporary file for every part that carries a filename. Neither parser limits how many fields or parts a body may hold.
A remote attacker can exhaust worker memory with a body made of separators, or create thousands of temporary files with one request of small file parts. |
| Mongoose is an embedded web server and network library. Prior to 7.22, mg_path_is_sane in src/util.c read path.buf[1] without first requiring path.len to be at least two and read s[2] when only two bytes remained. Unauthenticated remote requests reaching mg_http_upload or mg_http_serve_dir with the affected short path shapes could therefore trigger one-byte heap out-of-bounds reads. On bare-metal or RTOS targets without memory protection, the adjacent byte could be exposed or influence whether a path was accepted, and instrumented builds could crash. This issue is fixed in version 7.22. |
| Kafka Streams derives its stream-time clock from record timestamps. PunctuationSchedule.next() computed the next punctuation time as timestamp + (intervalsMissed + 1) * interval with no overflow check. A record with a timestamp at or near Long.MAX_VALUE advances stream time to that value, so the next stream-time punctuation overflows to a negative time. PunctuationQueue then re-queues that time and loops on it indefinitely while holding a lock, stalling the StreamThread.
Impact:
A single record is enough. The affected StreamThread stops processing, and because the record stays in the topic the hang returns on restart; an application whose partitions are all affected becomes unresponsive. Only the Streams application is affected, not the brokers or the cluster. Triggering it needs write access to a source topic whose topology uses stream-time punctuation, and a broker that stores the record: brokers from Apache Kafka 4.0.0 reject such a timestamp by default (log.message.timestamp.after.max.ms, one hour), so it is reachable only on older brokers or where that bound has been relaxed.
Mitigation:
Upgrade Kafka Streams to 4.2.2, 4.3.2, or 4.4.0. As defense in depth, keep log.message.timestamp.after.max.ms bounded on source topics and restrict write access to them.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the next punctuation time is computed with overflow-checked arithmetic (clamped to Long.MAX_VALUE), and a rescheduled punctuation is re-queued only when its time moves forward. |
| Apache Kafka's code-generated readers for flexible protocol versions read a tagged-field count declared by the sender and retain a RawTaggedField object for each unknown field. That count was bounded only by the outer request frame size (socket.request.max.bytes); it was not checked against the remaining buffer bytes or capped. Because each entry can be encoded in as little as two bytes (unknown tag 0, size 0), a modest request can declare tens of millions of tagged fields and force one object allocation per declared field. Flexible request headers (header version 2, used by flexible APIs such as ApiVersions v3) are parsed this way, so the amplification applies to the request header itself.
Impact:
The flexible request header is parsed on the network thread before authorization, request dispatch, and request-time quota accounting. A client can send a request of a few tens of megabytes whose header declares about 20 million tagged fields, forcing roughly that many RawTaggedField allocations and exhausting broker heap or inducing process-wide GC stalls, denying broker service. Because the header is parsed for pre-authentication APIs such as ApiVersions (v3), the allocation can occur before authentication; no Kafka resource ACL or quota is required.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers bounds-check the tagged-field count for flexible-versioned messages, rejecting a negative count, a count exceeding the remaining buffer bytes, or a count exceeding a fixed maximum (10,000), before any per-field allocation. |
| Apache Kafka's code-generated protocol readers pre-size an array's collection from the element count declared by the sender. That count is checked only against the bytes remaining in the request buffer, which assumes about one byte per element; because most elements need several bytes, a request can declare far more elements than the buffer holds and still pass. For a keyed array the reader then allocates an ImplicitLinkedHashCollection of capacity (2 * count +1), so a request of a few tens of megabytes can force a heap allocation several times larger before any element is read. The pattern is emitted into every generated reader, so it affects all Kafka API types with an array field.
Impact:
Request parsing happens before any authorization check. On a listener that does not require authentication (for example PLAINTEXT), an unauthenticated attacker can send a few concurrent requests that each declare a very large=
array length and allocate many times their wire size in broker heap, crashing the broker with an OutOfMemoryError. The reporter demonstrated three concurrent ~90 MB ProduceRequest (v3) connections exhausting a 1 GB heap (~8x amplification). On listeners that require authentication, the attacker needs valid credentials but no specific ACL, since parsing precedes authorization..
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers cap the initial array pre-allocation at MessageUtil.MAX_PREALLOCATED_ARRAY_CAPACITY (1000) and grow it on demand, and reject a declared array length above MessageUtil.MAX_ARRAY_LENGTH (1,000,000). |
| A Kafka broker using SASL/OAUTHBEARER with the default validator (sasl.oauthbearer.jwt.validator.class=DefaultJwtValidator) selects its implementation from configuration. When sasl.oauthbearer.jwks.endpoint.url is set, the validator verifies the JWT signature. When that URL is unset (the default) and no verification key resolver is supplied, DefaultJwtValidator silently falls back to ClientJwtValidator, which does not verify the JWT signature, algorithm, or issuer - and the broker starts with no warning or error. This is the residual of CVE-2026-33557, whose fix restored signature verification only on the path where the JWKS endpoint URL is set.
Impact:
A broker in this state accepts any structurally valid JWT, including "alg":"none" tokens. An unauthenticated remote attacker who can reach the listener can forge a token asserting any principal - including configured superusers - and gain full access to the cluster. Only brokers that enable SASL/OAUTHBEARER validation without a JWKS endpoint URL (and without a custom verification key resolver) are affected; brokers that set the URL verify signatures and are not affected. Unlike CVE-2026-110952 (issuer/audience not enforced by default), here no signature is verified at all.
Mitigation (all affected versions, no upgrade required):
Set sasl.oauthbearer.jwks.endpoint.url for every listener/mechanism that uses OAuthBearerValidatorCallbackHandler, or configure a signature-verifying sasl.oauthbearer.jwt.validator.class.
Resolution:
From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: a broker that would fall back to the non-verifying ClientJwtValidator fails to start with a ConfigException instead of running without signature verification (secure by default). |
| Joomla Extension - balbooa.com - Unauthenticated arbitrary file deletion via path traversal in Gridbox < 2.20.5.0 |
| Joomla Extension - balbooa.com - Unauthenticated stored XSS in the "Recent Comments / Recent Reviews" widget in Gridbox < 2.20.5.0 |
| A denial-of-service issue was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27. An attacker in a privileged network position may be able to cause a denial-of-service. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted image may lead to unexpected process termination. |
| Mitigation bypass in the DOM: Push Subscriptions component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| An authenticated Kafka principal with no authorization grants (not even ALTER_CONFIGS) can make a broker read a file or an environment variable from the broker host and return its contents. An IncrementalAlterConfigs (or AlterConfigs) request targeting a BROKER resource reaches the broker's configuration validation before any authorization check is applied to that path. Validation resolves configuration variables such as ${file:/path:key} or ${env:VAR} using a ConfigProvider named in the request, and this resolution bypasses the org.apache.kafka.automatic.config.providers allowlist that was added as the mitigation for CVE-2024-31141. An arbitrary ConfigProvider (for example FileConfigProvider or EnvVarConfigProvider) is therefore instantiated and the referenced file or environment variable is read, and a type-validation error returns the resolved content to the caller.
Impact:
On a cluster with an authorizer enabled, an authenticated principal with no authorization grants can read the contents of files accessible to the broker process, and the broker's environment variables, exposing credentials, keystores, or other secrets, defeating the CVE-2024-31141 allowlist. The read is bounded by the broker process's file permissions. The brokers and the cluster remain available; the issue is disclosure of file and environment- variable contents. Clusters with no authorizer configured are not affected in practice, because every principal already holds ALTER_CONFIGS there.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. As defense in depth, run brokers under a least-privileged operating-system account so that sensitive files are not readable by the broker process.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: broker configuration changes are authorized (ALTER_CONFIGS on the cluster) before the configuration is validated, and configuration- variable resolution enforces the config-providers allowlist. |
| In checkLastKnownCellIdAccessPermission of TelephonyPermissions.java, there is a possible permission bypass due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A heap buffer overflow in gdbserver's QTDPsrc packet handler allows an unauthenticated remote attacker to achieve native code execution in the gdbserver process. The vulnerability results from a mismatch between a packet's declared source length and the actual data length, causing hex2bin to write beyond the allocated heap buffer. |
| Vulnerability in the Siebel Apps - Marketing product of Oracle Siebel CRM (component: Marketing). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel Apps - Marketing. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Siebel Apps - Marketing, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Siebel Apps - Marketing accessible data as well as unauthorized read access to a subset of Siebel Apps - Marketing accessible data. CVSS 3.1 Base Score 6.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N). |
| Vulnerability in the Siebel Apps - Marketing product of Oracle Siebel CRM (component: Marketing). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Siebel Apps - Marketing executes to compromise Siebel Apps - Marketing. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel Apps - Marketing accessible data. CVSS 3.1 Base Score 5.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| A flaw was found in the FTP GVfs backend. A remote attacker could exploit this input validation vulnerability by supplying specially crafted file paths containing carriage return and line feed (CRLF) sequences. These unsanitized sequences allow the attacker to terminate intended FTP commands and inject arbitrary FTP commands, potentially leading to arbitrary code execution or other severe impacts. |
| A flaw was found in Libsoup. The server-side digest authentication implementation in the SoupAuthDomainDigest class does not properly track issued nonces or enforce the required incrementing nonce-count (nc) attribute. This vulnerability allows a remote attacker to capture a single valid authentication header and replay it repeatedly. Consequently, the attacker can bypass authentication and gain unauthorized access to protected resources, impersonating the legitimate user. |
