| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A cross-site scripting (XSS) vulnerability exists in Grafana caused by combining a client path traversal and open redirect. This allows attackers to redirect users to a website that hosts a frontend plugin that will execute arbitrary JavaScript. This vulnerability does not require editor permissions and if anonymous access is enabled, the XSS will work. If the Grafana Image Renderer plugin is installed, it is possible to exploit the open redirect to achieve a full read SSRF.
The default Content-Security-Policy (CSP) in Grafana will block the XSS though the `connect-src` directive. |
| OpenClaw before 2026.3.31 contains a fail-open vulnerability in the plugin installation flow where security scan failures do not block installation. Attackers can exploit scan failures to install untrusted plugins when operators proceed despite visible scan warnings. |
| OpenClaw before 2026.4.8 contains a session management vulnerability where existing WebSocket sessions survive shared gateway token rotation. Attackers can maintain unauthorized access to WebSocket connections after token rotation by exploiting the failure to disconnect existing shared-token sessions. |
| Weak Password Recovery Mechanism for Forgotten Password vulnerability in Gilblas Ngunte Possi PSW Front-end Login & Registration psw-login-and-registration allows Password Recovery Exploitation.This issue affects PSW Front-end Login & Registration: from n/a through <= 1.13. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n". |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: skip expectations in other netns via proc
Skip expectations that do not reside in this netns.
Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's
conntrack entries via proc"). |
| Uncontrolled Recursion vulnerability in Apache Thrift.
This issue affects Apache Thrift: before 0.23.0.
Users are recommended to upgrade to version 0.23.0, which fixes the issue. |
| A script imports issue was addressed with improved isolation. This issue is fixed in Safari 18.4, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, visionOS 2.4. Visiting a website may leak sensitive data. |
| OpenClaw before 2026.3.31 contains a sender allowlist bypass vulnerability that allows remote attackers to access restricted messages. Attackers can exploit fetched quoted, root, and thread context messages to bypass sender allowlist restrictions and retrieve unauthorized content. |
| Authorization Bypass Through User-Controlled Key vulnerability in SimpleCalendar Google Calendar Events google-calendar-events allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Google Calendar Events: from n/a through <= 3.5.9. |
| Authorization Bypass Through User-Controlled Key vulnerability in Eagle-Themes Eagle Booking eagle-booking allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Eagle Booking: from n/a through <= 1.3.4.3. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in WPFactory Scheduled & Automatic Order Status Controller for WooCommerce order-status-rules-for-woocommerce allows Phishing.This issue affects Scheduled & Automatic Order Status Controller for WooCommerce: from n/a through <= 3.7.1. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in Doofinder Doofinder WP & WooCommerce Search.This issue affects Doofinder WP & WooCommerce Search: from n/a through 1.5.49. |
| Underscore.js is a utility-belt library for JavaScript. Prior to 1.13.8, the _.flatten and _.isEqual functions use recursion without a depth limit. Under very specific conditions, detailed below, an attacker could exploit this in a Denial of Service (DoS) attack by triggering a stack overflow. Untrusted input must be used to create a recursive datastructure, for example using JSON.parse, with no enforced depth limit. The datastructure thus created must be passed to _.flatten or _.isEqual. In the case of _.flatten, the vulnerability can only be exploited if it is possible for a remote client to prepare a datastructure that consists of arrays at all levels AND if no finite depth limit is passed as the second argument to _.flatten. In the case of _.isEqual, the vulnerability can only be exploited if there exists a code path in which two distinct datastructures that were submitted by the same remote client are compared using _.isEqual. For example, if a client submits data that are stored in a database, and the same client can later submit another datastructure that is then compared to the data that were saved in the database previously, OR if a client submits a single request, but its data are parsed twice, creating two non-identical but equivalent datastructures that are then compared. Exceptions originating from the call to _.flatten or _.isEqual, as a result of a stack overflow, are not being caught. This vulnerability is fixed in 1.13.8. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, toFormData recursively walks nested objects with no depth limit, so a deeply nested value passed as request data crashes the Node.js process with a RangeError. This vulnerability is fixed in 1.15.1 and 0.31.1. |
| The issue was addressed with improved input validation. This issue is fixed in Safari 18.4, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, visionOS 2.4, watchOS 11.4. A malicious website may be able to claim WebAuthn credentials from another website that shares a registrable suffix. |
| ERB is a templating system for Ruby. Ruby 2.7.0 (before ERB 2.2.0 was published on rubygems.org) introduced an `@_init` instance variable guard in `ERB#result` and `ERB#run` to prevent code execution when an ERB object is reconstructed via `Marshal.load` (deserialization). However, three other public methods that also evaluate `@src` via `eval()` were not given the same guard: `ERB#def_method`, `ERB#def_module`, and `ERB#def_class`. An attacker who can trigger `Marshal.load` on untrusted data in a Ruby application that has `erb` loaded can use `ERB#def_module` (zero-arg, default parameters) as a code execution sink, bypassing the `@_init` protection entirely. ERB 4.0.3.1, 4.0.4.1, 6.0.1.1, and 6.0.4 patch the issue. |
| The issue was addressed by adding additional logic. This issue is fixed in Safari 18.3, iOS 18.3 and iPadOS 18.3, macOS Sequoia 15.3. Visiting a malicious website may lead to address bar spoofing. |
