| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| llama.cpp builds b7492 through the latest b9060 contains a use-after-free vulnerability in the vocab pointer of llama-server when the --sleep-idle-seconds feature is enabled, allowing unauthenticated remote attackers to execute arbitrary code. Attackers can trigger the vulnerability by sending requests to affected endpoints while the server transitions to sleep mode, causing concurrent worker threads to dereference a freed vocab pointer that can be reclaimed with attacker-controlled data to achieve remote code execution. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Telephony Service allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Event Logging Service allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Work Folder Service allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Common Log File System Driver allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix DMA direction for NPU mailbox buffer
airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE,
but some callers expect the NPU to write response data back into the
same buffer:
- airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into
the buffer, then the caller reads it via memcpy()
- airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back
npu_stats_addr field in the response
On non-cache-coherent architectures like EN7581 (Cortex-A53 without
hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op
— it does not invalidate the CPU cache. If the NPU-written cache line
is still present in the CPU cache when the caller reads the buffer,
the CPU observes stale data instead of the NPU response.
This is a timing-sensitive bug: small mailbox buffers (~24 bytes)
typically fit in a single cache line and may survive in the cache
until the caller reads them, producing silent data corruption rather
than a crash. The bug is more likely to trigger when the caller reads
the response immediately after dma_unmap_single() without intervening
cache-evicting operations.
Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures
dma_unmap_single() invalidates the CPU cache on non-coherent systems.
The mailbox buffers are small so there is no performance concern. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not account for OoO in mptcp_rcvbuf_grow()
MPTCP-level OoOs are physiological when multiple subflows are active
concurrently and will not cause retransmissions nor are caused by
drops.
Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly
drifting towards tcp_rmem[2].
Remove such accounting. Note that subflows will still account for TCP-level
OoO when the MPTCP-level rcvbuf is propagated.
This also closes a subtle and very unlikely race condition with rcvspace
init; active sockets with user-space holding the msk-level socket lock,
could complete such initialization in the receive callback, after that the
first OoO data reaches the rcvbuf and potentially triggering a divide by
zero Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: pin conn during async oplock break notification
smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn
pointer in an async ksmbd_work and then queue that work on ksmbd-io. The
work only increments conn->r_count, which prevents teardown from passing
the pending-request wait after the increment, but it does not pin the
struct ksmbd_conn object.
If connection teardown races with an oplock break notification, the last
conn reference can be dropped before the queued worker finishes. The
worker then uses the freed conn in ksmbd_conn_write() and
ksmbd_conn_r_count_dec().
Take a real conn reference when publishing the conn pointer to the async
work item, and drop it after the notification work has decremented
r_count. Apply the same lifetime rule to lease break notification, which
uses the same work->conn pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: wait on ublk_dev_ready() instead of ub->completion
ub->completion is only re-armed by a successful START_USER_RECOVERY. If
the ublk server sends END_USER_RECOVERY without one - e.g. its START
failed with -EBUSY and the error was ignored - the wait is satisfied by
the stale completion of the previous recovery cycle, and the device is
marked LIVE and the requeue list kicked while the FETCH stream is still
running and ubq->canceling is still set. The kick redispatches a
previously requeued request, __ublk_queue_rq_common() sees ->canceling
and parks it again via __ublk_abort_rq(), and after the last FETCH
clears ->canceling nothing ever kicks the requeue list again: the
request is stranded there while holding its tag. If it is the flush
machinery's flush_rq, every subsequent fsync piles up in uninterruptible
sleep and teardown hangs on tag draining. This matches a report of a
lost PREFLUSH with ext4 on top of ublk after daemon crash recovery.
ub->completion is an edge-triggered latch used as a proxy for the level
condition "every queue has fetched all I/O commands", which can regress
(F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop
it and wait on the real condition instead: the new helper
ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via
wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then
re-checks it under ub->mutex, waiting again on regression, and returns
with the mutex held and readiness guaranteed.
Readiness becomes true in the same ub->mutex critical section that
clears the last queue's ->canceling, so END_USER_RECOVERY marks the
device LIVE and kicks the requeue list strictly after ->canceling
clears. The wait stays interruptible, so a server whose daemon died can
still be signalled out. For ublk_ctrl_start_dev() this replaces the
fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting
until the device is ready again. |
| A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter deregistration race
Adapters can be looked up by their id using i2c_get_adapter() which
takes a reference to the embedded struct device.
Remove the adapter from the IDR before tearing it down during
deregistration (and on registration failure) to make sure its resources
are not accessed after having been freed (e.g. the device name). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and
share the same erratum #1235: hardware may read a stale IsRunning=1 bit
during ICR write emulation and silently fail to generate an
AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU.
The absence of the VM-Exit causes KVM to miss the required wakeup of
blocking target vCPUs, leading to hung vCPUs and unbounded delays in
guest execution.
Extend the existing AMD Family 17h erratum #1235 workaround to also cover
Hygon Family 18h. With IPI virtualization disabled, KVM never sets
IsRunning=1 in the Physical ID table, so every non-self IPI generates a
VM-Exit and is correctly emulated. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs, afs: Fix write skipping in dir/link writepages
Fix netfs_write_single() and afs_single_writepages() to better handle a
write that would be skipped due to lock contention and WB_SYNC_NONE by
returning 1 from netfs_write_single() if it skipped and making
afs_single_writepages() skip also. If a skip occurs, the inode must be
re-marked as the VFS may have cleared the mark.
This is really only theoretical for directories in netfs_write_single() as
the only path to that is through afs_single_writepages() that takes the
->validate_lock around it, thereby serialising it. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows MIDI Service Module allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ap: use generic driver_override infrastructure
When the AP masks are updated via apmask_store() or aqmask_store(),
ap_bus_revise_bindings() is called after ap_attr_mutex has been
released.
This calls __ap_revise_reserved(), which accesses the driver_override
field without holding any lock, racing against a concurrent
driver_override_store() that may free the old string, resulting in a
potential UAF.
Fix this by using the driver-core driver_override infrastructure, which
protects all accesses with an internal spinlock.
Note that unlike most other buses, the AP bus does not check
driver_override in its match() callback; the override is checked in
ap_device_probe() and __ap_revise_reserved() instead.
Also note that we do not enable the driver_override feature of struct
bus_type, as AP - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Additionally, AP has a custom counter that is modified in the
corresponding custom driver_override_store(). |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Plug race against a concurrent OOM disable
syzbot reported a puzzling splat:
WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20
stub_timer() is installed as timer callback function in
hrtimer_fixup_assert_init(), which is invoked when
debug_object_assert_init() can't find a shadow object. In that case debug
objects emits a warning about it before invoking the fixup.
Though the provided console log lacks this warning and instead has the
following a few seconds before the splat:
ODEBUG: Out of memory. ODEBUG disabled
So the object was looked up in debug_object_assert_init() and the lookup
failed due a concurrent out of memory situation which disabled debug
objects and freed the shadow objects:
debug_object_assert_init()
if (!debug_objects_enabled)
return; obj = alloc();
if (!obj) {
// Out of memory
debug_objects_enabled = false;
free_objects();
obj = lookup_or_alloc();
// The lookup failed because the other side
// removed the objects, so this returns
// an error code as the object in question
// is not statically initialized
if (!IS_ERR_OR_NULL(obj))
return;
if (!obj) {
debug_oom();
return;
}
print(...)
if (!debug_objects_enabled)
return;
fixup(...)
The debug object splat is skipped because debug_objects_enabled is false,
but the fixup callback is invoked unconditionally, which makes the timer
disfunctional.
This is only a problem in debug_object_assert_init() and
debug_object_activate() as both have to handle statically initialized
objects and therefore must handle the error pointer return case
gracefully. All other places only handle the found/not found case and the
NULL pointer return is a signal for OOM. Otherwise they get a valid shadow
object.
Plug the hole by checking whether debug objects are still enabled before
invoking the print and fixup function in those two places. |
| The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization.
During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence.
An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor.
The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:
- directly, for the iExtension string-descriptor fixup loop;
- indirectly, four times via uvc_copy_descriptors() (once per speed),
where the helper iterates uvc->desc.extension_units (which aliases
&opts->extension_units) to size and emit XU descriptors.
The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations. A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.
Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label. This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.
Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary. |
