| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TSO DMA API usage causing oops
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Use disable_delayed_work_sync
This makes use of disable_delayed_work_sync instead
cancel_delayed_work_sync as it not only cancel the ongoing work but also
disables new submit which is disarable since the object holding the work
is about to be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Flush partial mappings in error case
If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.
Fix it by explicitly flushing all mappings in our VMA on the error path.
See commit 79a61cc3fc04 ("mm: avoid leaving partial pfn mappings around in
error case"). |
| In the Linux kernel, the following vulnerability has been resolved:
dm vdo: don't refer to dedupe_context after releasing it
Clear the dedupe_context pointer in a data_vio whenever ownership of
the context is lost, so that vdo can't examine it accidentally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix overflow in oa batch buffer
By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch
buffer, this is not a problem if batch buffer is only used once but
oa reuses the batch buffer for the same metric and at each call
it appends a MI_BATCH_BUFFER_END, printing the warning below and then
overflowing.
[ 381.072016] ------------[ cut here ]------------
[ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed!
platform: LUNARLAKE subplatform: 1
graphics: Xe2_LPG / Xe2_HPG 20.04 step B0
media: Xe2_LPM / Xe2_HPM 20.00 step B0
tile: 0 VRAM 0 B
GT: 0 type 1
So here checking if batch buffer already have MI_BATCH_BUFFER_END if
not append it.
v2:
- simply fix, suggestion from Ashutosh
(cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a) |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: prevent possible tunnel refcount underflow
When a session is created, it sets a backpointer to its tunnel. When
the session refcount drops to 0, l2tp_session_free drops the tunnel
refcount if session->tunnel is non-NULL. However, session->tunnel is
set in l2tp_session_create, before the tunnel refcount is incremented
by l2tp_session_register, which leaves a small window where
session->tunnel is non-NULL when the tunnel refcount hasn't been
bumped.
Moving the assignment to l2tp_session_register is trivial but
l2tp_session_create calls l2tp_session_set_header_len which uses
session->tunnel to get the tunnel's encap. Add an encap arg to
l2tp_session_set_header_len to avoid using session->tunnel.
If l2tpv3 sessions have colliding IDs, it is possible for
l2tp_v3_session_get to race with l2tp_session_register and fetch a
session which doesn't yet have session->tunnel set. Add a check for
this case. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lsm: Add check for BPF LSM return value
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: tcp: ipv4, fix incorrect labeling
Currently, Smack mirrors the label of incoming tcp/ipv4 connections:
when a label 'foo' connects to a label 'bar' with tcp/ipv4,
'foo' always gets 'foo' in returned ipv4 packets. So,
1) returned packets are incorrectly labeled ('foo' instead of 'bar')
2) 'bar' can write to 'foo' without being authorized to write.
Here is a scenario how to see this:
* Take two machines, let's call them C and S,
with active Smack in the default state
(no settings, no rules, no labeled hosts, only builtin labels)
* At S, add Smack rule 'foo bar w'
(labels 'foo' and 'bar' are instantiated at S at this moment)
* At S, at label 'bar', launch a program
that listens for incoming tcp/ipv4 connections
* From C, at label 'foo', connect to the listener at S.
(label 'foo' is instantiated at C at this moment)
Connection succeedes and works.
* Send some data in both directions.
* Collect network traffic of this connection.
All packets in both directions are labeled with the CIPSO
of the label 'foo'. Hence, label 'bar' writes to 'foo' without
being authorized, and even without ever being known at C.
If anybody cares: exactly the same happens with DCCP.
This behavior 1st manifested in release 2.6.29.4 (see Fixes below)
and it looks unintentional. At least, no explanation was provided.
I changed returned packes label into the 'bar',
to bring it into line with the Smack documentation claims. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: Fix out-of-bound access
If an ATU violation was caused by a CPU Load operation, the SPID could
be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array). |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: fix invalid FIFO access with special register set
When enabling access to the special register set, Receiver time-out and
RHR interrupts can happen. In this case, the IRQ handler will try to read
from the FIFO thru the RHR register at address 0x00, but address 0x00 is
mapped to DLL register, resulting in erroneous FIFO reading.
Call graph example:
sc16is7xx_startup(): entry
sc16is7xx_ms_proc(): entry
sc16is7xx_set_termios(): entry
sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set
sc16is7xx_port_irq() entry --> IIR is 0x0C
sc16is7xx_handle_rx() entry
sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is
mapped to DLL (LCR=LCR_CONF_MODE_A)
sc16is7xx_set_baud(): exit --> Restore access to general register set
Fix the problem by claiming the efr_lock mutex when accessing the Special
register set. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid using corrupted block bitmap buffer
When the filesystem block bitmap is corrupted, we detect the corruption
while loading the bitmap and fail the allocation with error. However the
next allocation from the same bitmap will notice the bitmap buffer is
already loaded and tries to allocate from the bitmap with mixed results
(depending on the exact nature of the bitmap corruption). Fix the
problem by using BH_verified bit to indicate whether the bitmap is valid
or not. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip pipe if the pipe idx not set properly
[why]
Driver crashes when pipe idx not set properly
[how]
Add code to skip the pipe that idx not set properly |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: always initialize cqe.result
The spec doesn't mandate that the first two double words (aka results)
for the command queue entry need to be set to 0 when they are not
used (not specified). Though, the target implemention returns 0 for TCP
and FC but not for RDMA.
Let's make RDMA behave the same and thus explicitly initializing the
result field. This prevents leaking any data from the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: read txq->read_ptr under lock
If we read txq->read_ptr without lock, we can read the same
value twice, then obtain the lock, and reclaim from there
to two different places, but crucially reclaim the same
entry twice, resulting in the WARN_ONCE() a little later.
Fix that by reading txq->read_ptr under lock. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: properly terminate timers for kernel sockets
We had various syzbot reports about tcp timers firing after
the corresponding netns has been dismantled.
Fortunately Josef Bacik could trigger the issue more often,
and could test a patch I wrote two years ago.
When TCP sockets are closed, we call inet_csk_clear_xmit_timers()
to 'stop' the timers.
inet_csk_clear_xmit_timers() can be called from any context,
including when socket lock is held.
This is the reason it uses sk_stop_timer(), aka del_timer().
This means that ongoing timers might finish much later.
For user sockets, this is fine because each running timer
holds a reference on the socket, and the user socket holds
a reference on the netns.
For kernel sockets, we risk that the netns is freed before
timer can complete, because kernel sockets do not hold
reference on the netns.
This patch adds inet_csk_clear_xmit_timers_sync() function
that using sk_stop_timer_sync() to make sure all timers
are terminated before the kernel socket is released.
Modules using kernel sockets close them in their netns exit()
handler.
Also add sock_not_owned_by_me() helper to get LOCKDEP
support : inet_csk_clear_xmit_timers_sync() must not be called
while socket lock is held.
It is very possible we can revert in the future commit
3a58f13a881e ("net: rds: acquire refcount on TCP sockets")
which attempted to solve the issue in rds only.
(net/smc/af_smc.c and net/mptcp/subflow.c have similar code)
We probably can remove the check_net() tests from
tcp_out_of_resources() and __tcp_close() in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: unmap and remove csa_va properly
Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.
v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)
[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097] <TASK>
[14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187] drm_file_free+0x1d6/0x300 [drm]
[14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220] drm_release+0x5e/0x100 [drm]
[14616.937234] __fput+0x9f/0x280
[14616.937239] ____fput+0xe/0x20
[14616.937241] task_work_run+0x61/0x90
[14616.937246] exit_to_user_mode_prepare+0x215/0x220
[14616.937251] syscall_exit_to_user_mode+0x2a/0x60
[14616.937254] do_syscall_64+0x48/0x90
[14616.937257] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Validate i_depth for exhash directories
A fuzzer test introduced corruption that ends up with a depth of 0 in
dir_e_read(), causing an undefined shift by 32 at:
index = hash >> (32 - dip->i_depth);
As calculated in an open-coded way in dir_make_exhash(), the minimum
depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is
invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time.
So we can avoid the undefined behaviour by checking for depth values
lower than the minimum in gfs2_dinode_in(). Values greater than the
maximum are already being checked for there.
Also switch the calculation in dir_make_exhash() to use ilog2() to
clarify how the depth is calculated.
Tested with the syzkaller repro.c and xfstests '-g quick'. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp
conn->chan_lock isn't acquired before l2cap_get_chan_by_scid,
if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance'
is triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check S1G action frame size
Before checking the action code, check that it even
exists in the frame. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits
If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.
Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179. |
