| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix signededness bug in smb_direct_prepare_negotiation()
smb_direct_prepare_negotiation() casts an unsigned __u32 value
from sp->max_recv_size and req->preferred_send_size to a signed
int before computing min_t(int, ...). A maliciously provided
preferred_send_size of 0x80000000 will return as smaller than
max_recv_size, and then be used to set the maximum allowed
alowed receive size for the next message.
By sending a second message with a large value (>1420 bytes)
the attacker can then achieve a heap buffer overflow.
This fix replaces min_t(int, ...) with min_t(u32) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix 22000 series SMEM parsing
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: remove xfs_attr_leaf_hasname
The calling convention of xfs_attr_leaf_hasname() is problematic, because
it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer
when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a
non-NULL buffer pointer for an already released buffer when
xfs_attr3_leaf_lookup_int fails with other error values.
Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so
that the buffer release code is done by each caller of
xfs_attr3_leaf_read. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix circular locking dependency in run_unpack_ex
Syzbot reported a circular locking dependency between wnd->rw_lock
(sbi->used.bitmap) and ni->file.run_lock.
The deadlock scenario:
1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock.
2. run_unpack_ex() takes wnd->rw_lock then tries to acquire
ni->file.run_lock inside ntfs_refresh_zone().
This creates an AB-BA deadlock.
Fix this by using down_read_trylock() instead of down_read() when
acquiring run_lock in run_unpack_ex(). If the lock is contended,
skip ntfs_refresh_zone() - the MFT zone will be refreshed on the
next MFT operation. This breaks the circular dependency since we
never block waiting for run_lock while holding wnd->rw_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mixer: oss: Add card disconnect checkpoints
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: validate length in dlm_search_rsb_tree
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix zero size inode with non-zero size after log replay
When logging that an inode exists, as part of logging a new name or
logging new dir entries for a directory, we always set the generation of
the logged inode item to 0. This is to signal during log replay (in
overwrite_item()), that we should not set the i_size since we only logged
that an inode exists, so the i_size of the inode in the subvolume tree
must be preserved (as when we log new names or that an inode exists, we
don't log extents).
This works fine except when we have already logged an inode in full mode
or it's the first time we are logging an inode created in a past
transaction, that inode has a new i_size of 0 and then we log a new name
for the inode (due to a new hardlink or a rename), in which case we log
an i_size of 0 for the inode and a generation of 0, which causes the log
replay code to not update the inode's i_size to 0 (in overwrite_item()).
An example scenario:
mkdir /mnt/dir
xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo
sync
xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo
ln /mnt/dir/foo /mnt/dir/bar
xfs_io -c "fsync" /mnt/dir
<power fail>
After log replay the file remains with a size of 64K. This is because when
we first log the inode, when we fsync file foo, we log its current i_size
of 0, and then when we create a hard link we log again the inode in exists
mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we
add to the log tree, so during log replay overwrite_item() sees that the
generation is 0 and i_size is 0 so we skip updating the inode's i_size
from 64K to 0.
Fix this by making sure at fill_inode_item() we always log the real
generation of the inode if it was logged in the current transaction with
the i_size we logged before. Also if an inode created in a previous
transaction is logged in exists mode only, make sure we log the i_size
stored in the inode item located from the commit root, so that if we log
multiple times that the inode exists we get the correct i_size.
A test case for fstests will follow soon. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Use irq_work to start GP in tiny SRCU
Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),
which acquires the workqueue pool->lock.
This causes a lockdep splat when call_srcu() is called with a scheduler
lock held, due to:
call_srcu() [holding pi_lock]
srcu_gp_start_if_needed()
schedule_work() -> pool->lock
workqueue_init() / create_worker() [holding pool->lock]
wake_up_process() -> try_to_wake_up() -> pi_lock
Also add irq_work_sync() to cleanup_srcu_struct() to prevent a
use-after-free if a queued irq_work fires after cleanup begins.
Tested with rcutorture SRCU-T and no lockdep warnings.
[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work
to start process_srcu()" ] |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: account XFRMA_IF_ID in aevent size calculation
xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then
build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is
set.
xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states
with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0)
in xfrm_get_ae(), turning a malformed netlink interaction into a kernel
panic.
Account XFRMA_IF_ID in the size calculation unconditionally and replace
the BUG_ON with normal error unwinding. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
We need to check __in6_dev_get() for possible NULL value, as
suggested by Yiming Qian.
Also add skb_dst_dev_rcu() instead of skb_dst_dev(),
and two missing READ_ONCE().
Note that @dev can't be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ioam6: fix OOB and missing lock
When trace->type.bit6 is set:
if (trace->type.bit6) {
...
queue = skb_get_tx_queue(dev, skb);
qdisc = rcu_dereference(queue->qdisc);
This code can lead to an out-of-bounds access of the dev->_tx[] array
when is_input is true. In such a case, the packet is on the RX path and
skb->queue_mapping contains the RX queue index of the ingress device. If
the ingress device has more RX queues than the egress device (dev) has
TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.
Add a check to avoid this situation since skb_get_tx_queue() does not
clamp the index. This issue has also revealed that per queue visibility
cannot be accurate and will be replaced later as a new feature.
While at it, add missing lock around qdisc_qstats_qlen_backlog(). The
function __ioam6_fill_trace_data() is called from both softirq and
process contexts, hence the use of spin_lock_bh() here. |
| In the Linux kernel, the following vulnerability has been resolved:
x86-64: rename misleadingly named '__copy_user_nocache()' function
This function was a masterclass in bad naming, for various historical
reasons.
It claimed to be a non-cached user copy. It is literally _neither_ of
those things. It's a specialty memory copy routine that uses
non-temporal stores for the destination (but not the source), and that
does exception handling for both source and destination accesses.
Also note that while it works for unaligned targets, any unaligned parts
(whether at beginning or end) will not use non-temporal stores, since
only words and quadwords can be non-temporal on x86.
The exception handling means that it _can_ be used for user space
accesses, but not on its own - it needs all the normal "start user space
access" logic around it.
But typically the user space access would be the source, not the
non-temporal destination. That was the original intention of this,
where the destination was some fragile persistent memory target that
needed non-temporal stores in order to catch machine check exceptions
synchronously and deal with them gracefully.
Thus that non-descriptive name: one use case was to copy from user space
into a non-cached kernel buffer. However, the existing users are a mix
of that intended use-case, and a couple of random drivers that just did
this as a performance tweak.
Some of those random drivers then actively misused the user copying
version (with STAC/CLAC and all) to do kernel copies without ever even
caring about the exception handling, _just_ for the non-temporal
destination.
Rename it as a first small step to actually make it halfway sane, and
change the prototype to be more normal: it doesn't take a user pointer
unless the caller has done the proper conversion, and the argument size
is the full size_t (it still won't actually copy more than 4GB in one
go, but there's also no reason to silently truncate the size argument in
the caller).
Finally, use this now sanely named function in the NTB code, which
mis-used a user copy version (with STAC/CLAC and all) of this interface
despite it not actually being a user copy at all. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: close crash window in attr dabtree inactivation
When inactivating an inode with node-format extended attributes,
xfs_attr3_node_inactive() invalidates all child leaf/node blocks via
xfs_trans_binval(), but intentionally does not remove the corresponding
entries from their parent node blocks. The implicit assumption is that
xfs_attr_inactive() will truncate the entire attr fork to zero extents
afterwards, so log recovery will never reach the root node and follow
those stale pointers.
However, if a log shutdown occurs after the leaf/node block cancellations
commit but before the attr bmap truncation commits, this assumption
breaks. Recovery replays the attr bmap intact (the inode still has
attr fork extents), but suppresses replay of all cancelled leaf/node
blocks, maybe leaving them as stale data on disk. On the next mount,
xlog_recover_process_iunlinks() retries inactivation and attempts to
read the root node via the attr bmap. If the root node was not replayed,
reading the unreplayed root block triggers a metadata verification
failure immediately; if it was replayed, following its child pointers
to unreplayed child blocks triggers the same failure:
XFS (pmem0): Metadata corruption detected at
xfs_da3_node_read_verify+0x53/0x220, xfs_da3_node block 0x78
XFS (pmem0): Unmount and run xfs_repair
XFS (pmem0): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
XFS (pmem0): metadata I/O error in "xfs_da_read_buf+0x104/0x190" at daddr 0x78 len 8 error 117
Fix this in two places:
In xfs_attr3_node_inactive(), after calling xfs_trans_binval() on a
child block, immediately remove the entry that references it from the
parent node in the same transaction. This eliminates the window where
the parent holds a pointer to a cancelled block. Once all children are
removed, the now-empty root node is converted to a leaf block within the
same transaction. This node-to-leaf conversion is necessary for crash
safety. If the system shutdown after the empty node is written to the
log but before the second-phase bmap truncation commits, log recovery
will attempt to verify the root block on disk. xfs_da3_node_verify()
does not permit a node block with count == 0; such a block will fail
verification and trigger a metadata corruption shutdown. on the other
hand, leaf blocks are allowed to have this transient state.
In xfs_attr_inactive(), split the attr fork truncation into two explicit
phases. First, truncate all extents beyond the root block (the child
extents whose parent references have already been removed above).
Second, invalidate the root block and truncate the attr bmap to zero in
a single transaction. The two operations in the second phase must be
atomic: as long as the attr bmap has any non-zero length, recovery can
follow it to the root block, so the root block invalidation must commit
together with the bmap-to-zero truncation. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
Presently, if the force feedback initialisation fails when probing the
Logitech G920 Driving Force Racing Wheel for Xbox One, an error number
will be returned and propagated before the userspace infrastructure
(sysfs and /dev/input) has been torn down. If userspace ignores the
errors and continues to use its references to these dangling entities, a
UAF will promptly follow.
We have 2 options; continue to return the error, but ensure that all of
the infrastructure is torn down accordingly or continue to treat this
condition as a warning by emitting the message but returning success.
It is thought that the original author's intention was to emit the
warning but keep the device functional, less the force feedback feature,
so let's go with that. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Mitigate potential OOB by removing bogus memset()
The memset() in hid_report_raw_event() has the good intention of
clearing out bogus data by zeroing the area from the end of the incoming
data string to the assumed end of the buffer. However, as we have
previously seen, doing so can easily result in OOB reads and writes in
the subsequent thread of execution.
The current suggestion from one of the HID maintainers is to remove the
memset() and simply return if the incoming event buffer size is not
large enough to fill the associated report.
Suggested-by Benjamin Tissoires <bentiss@kernel.org>
[bentiss: changed the return value] |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: add seqcount to protect the platform_label{,s} pair
The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have
an inconsistent view of platform_labels vs platform_label in case of a
concurrent resize (resize_platform_label_table, under
platform_mutex). This can lead to OOB accesses.
This patch adds a seqcount, so that we get a consistent snapshot.
Note that mpls_label_ok is also susceptible to this, so the check
against RTA_DST in rtm_to_route_config, done outside platform_mutex,
is not sufficient. This value gets passed to mpls_label_ok once more
in both mpls_route_add and mpls_route_del, so there is no issue, but
that additional check must not be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: use skb_header_pointer() for TCPv4 GSO frag_off check
Syzbot reported a KMSAN uninit-value warning in gso_features_check()
called from netif_skb_features() [1].
gso_features_check() reads iph->frag_off to decide whether to clear
mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr()
can rely on skb header offsets that are not always safe for direct
dereference on packets injected from PF_PACKET paths.
Use skb_header_pointer() for the TCPv4 frag_off check so the header read
is robust whether data is already linear or needs copying.
[1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: set backing store type from query type
bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the
firmware response in ctxm->type and later uses that value to index
fixed backing-store metadata arrays such as ctx_arr[] and
bnxt_bstore_to_trace[].
ctxm->type is fixed by the current backing-store query type and matches
the array index of ctx->ctx_arr. Set ctxm->type from the current loop
variable instead of depending on resp->type.
Also update the loop to advance type from next_valid_type in the for
statement, which keeps the control flow simpler for non-valid and
unchanged entries. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists
hci_cmd_sync_queue_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites to handle that. |
