| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix NULL dereferences in ef100_process_design_param()
Since cited commit, ef100_probe_main() and hence also
ef100_check_design_params() run before efx->net_dev is created;
consequently, we cannot netif_set_tso_max_size() or _segs() at this
point.
Move those netif calls to ef100_probe_netdev(), and also replace
netif_err within the design params code with pci_err. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE
There is a WARN_ON_ONCE to catch an unlikely situation when
domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless
happens we must avoid using a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
w1: fix NULL pointer dereference in probe
The w1_uart_probe() function calls w1_uart_serdev_open() (which includes
devm_serdev_device_open()) before setting the client ops via
serdev_device_set_client_ops(). This ordering can trigger a NULL pointer
dereference in the serdev controller's receive_buf handler, as it assumes
serdev->ops is valid when SERPORT_ACTIVE is set.
This is similar to the issue fixed in commit 5e700b384ec1
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.
Fix the race by ensuring client ops are set before enabling the port via
w1_uart_serdev_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix NULL dereference in SR-IOV VF creation error path
Clean up when virtfn setup fails to prevent NULL pointer dereference
during device removal. The kernel oops below occurred due to incorrect
error handling flow when pci_setup_device() fails.
Add pci_iov_scan_device(), which handles virtfn allocation and setup and
cleans up if pci_setup_device() fails, so pci_iov_add_virtfn() doesn't need
to call pci_stop_and_remove_bus_device(). This prevents accessing
partially initialized virtfn devices during removal.
BUG: kernel NULL pointer dereference, address: 00000000000000d0
RIP: 0010:device_del+0x3d/0x3d0
Call Trace:
pci_remove_bus_device+0x7c/0x100
pci_iov_add_virtfn+0xfa/0x200
sriov_enable+0x208/0x420
mlx5_core_sriov_configure+0x6a/0x160 [mlx5_core]
sriov_numvfs_store+0xae/0x1a0
[bhelgaas: commit log, return ERR_PTR(-ENOMEM) directly] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa
counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 provided
L1<->L2 context switch latency counters to L1 user-space via
perf-events. However the newly introduced PMU named 'vpa_pmu' doesn't
assign ownership of the PMU to the module 'vpa_pmu'. Consequently the
module 'vpa_pmu' can be unloaded while one of the perf-events are still
active, which can lead to kernel oops and panic of the form below on a
Pseries-LPAR:
BUG: Kernel NULL pointer dereference on read at 0x00000058
<snip>
NIP [c000000000506cb8] event_sched_out+0x40/0x258
LR [c00000000050e8a4] __perf_remove_from_context+0x7c/0x2b0
Call Trace:
[c00000025fc3fc30] [c00000025f8457a8] 0xc00000025f8457a8 (unreliable)
[c00000025fc3fc80] [fffffffffffffee0] 0xfffffffffffffee0
[c00000025fc3fcd0] [c000000000501e70] event_function+0xa8/0x120
<snip>
Kernel panic - not syncing: Aiee, killing interrupt handler!
Fix this by adding the module ownership to 'vpa_pmu' so that the module
'vpa_pmu' is ref-counted and prevented from being unloaded when perf-events
are initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference. |
| FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_ext_link_lan_adj_sid function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted OSPF packet. |
| FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_unknown_tlv function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted OSPF packet. |
| FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_ext_pref_pref_sid function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted OSPF packet. |
| FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_ext_pref_pref_sid function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted LSA Update packet. |
| A missing validation check in FreeRTOS-Plus-TCP's UDP/IPv6 packet processing code can lead to an invalid pointer dereference when receiving a UDP/IPv6 packet with an incorrect IP version field in the packet header. This issue only affects applications using IPv6.
We recommend upgrading to the latest version and ensure any forked or derivative code is patched to incorporate the new fixes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a netdev's
topology.
It takes as a parameter a const struct nlattr *header that's used for
error handling :
if (!phydev) {
NL_SET_ERR_MSG_ATTR(extack, header,
"no phy matching phyindex");
return ERR_PTR(-ENODEV);
}
In the notify path after a ->set operation however, there's no request
attributes available.
The typical callsite for the above function looks like:
phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER],
info->extack);
So, when tb is NULL (such as in the ethnl notify path), we have a nice
crash.
It turns out that there's only the PLCA command that is in that case, as
the other phydev-specific commands don't have a notification.
This commit fixes the crash by passing the cmd index and the nlattr
array separately, allowing NULL-checking it directly inside the helper. |
| Multiple versions of Central Monitor CNS-6201 contain a NULL pointer dereference vulnerability. When processing a crafted certain UDP packet, the affected device may abnormally terminate. |
| A vulnerability was detected in DCMTK up to 3.6.7. The impacted element is the function DcmQueryRetrieveConfig::readPeerList of the file /dcmqrcnf.cc of the component dcmqrscp. The manipulation results in null pointer dereference. The attack needs to be approached locally. The exploit is now public and may be used. Upgrading to version 3.6.8 is sufficient to resolve this issue. The patch is identified as 957fb31e5. Upgrading the affected component is advised. |
| An error in the ECMA-262 specification relating to Async Generators could have resulted in a type confusion, potentially leading to memory corruption and an exploitable crash. This vulnerability affects Firefox < 128, Firefox ESR < 115.13, Thunderbird < 115.13, and Thunderbird < 128. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: gpib: Fix Oops after disconnect in ni_usb
If the usb dongle is disconnected subsequent calls to the
driver cause a NULL dereference Oops as the bus_interface
is set to NULL on disconnect.
This problem was introduced by setting usb_dev from the bus_interface
for dev_xxx messages.
Previously bus_interface was checked for NULL only in the the functions
directly calling usb_fill_bulk_urb or usb_control_msg.
Check for valid bus_interface on all interface entry points
and return -ENODEV if it is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: gpib: Fix Oops after disconnect in agilent usb
If the agilent usb dongle is disconnected subsequent calls to the
driver cause a NULL dereference Oops as the bus_interface
is set to NULL on disconnect.
This problem was introduced by setting usb_dev from the bus_interface
for dev_xxx messages.
Previously bus_interface was checked for NULL only in the functions
directly calling usb_fill_bulk_urb or usb_control_msg.
Check for valid bus_interface on all interface entry points
and return -ENODEV if it is NULL. |
| Envoy is a cloud-native, open source edge and service proxy. Prior to 1.36.1, 1.35.5, 1.34.9, and 1.33.10, large requests and responses can potentially trigger TCP connection pool crashes due to flow control management in Envoy. It will happen when the connection is closing but upstream data is still coming, resulting in a buffer watermark callback nullptr reference. The vulnerability impacts TCP proxy and HTTP 1 & 2 mixed use cases based on ALPN. This vulnerability is fixed in 1.36.1, 1.35.5, 1.34.9, and 1.33.10. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: call genl_unregister_family() first in nbd_cleanup()
Otherwise there may be race between module removal and the handling of
netlink command, which can lead to the oops as shown below:
BUG: kernel NULL pointer dereference, address: 0000000000000098
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 31299 Comm: nbd-client Tainted: G E 5.14.0-rc4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:down_write+0x1a/0x50
Call Trace:
start_creating+0x89/0x130
debugfs_create_dir+0x1b/0x130
nbd_start_device+0x13d/0x390 [nbd]
nbd_genl_connect+0x42f/0x748 [nbd]
genl_family_rcv_msg_doit.isra.0+0xec/0x150
genl_rcv_msg+0xe5/0x1e0
netlink_rcv_skb+0x55/0x100
genl_rcv+0x29/0x40
netlink_unicast+0x1a8/0x250
netlink_sendmsg+0x21b/0x430
____sys_sendmsg+0x2a4/0x2d0
___sys_sendmsg+0x81/0xc0
__sys_sendmsg+0x62/0xb0
__x64_sys_sendmsg+0x1f/0x30
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in: nbd(E-) |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: prevent bad output lengths in smb2_ioctl_query_info()
When calling smb2_ioctl_query_info() with
smb_query_info::flags=PASSTHRU_FSCTL and
smb_query_info::output_buffer_length=0, the following would return
0x10
buffer = memdup_user(arg + sizeof(struct smb_query_info),
qi.output_buffer_length);
if (IS_ERR(buffer)) {
kfree(vars);
return PTR_ERR(buffer);
}
rather than a valid pointer thus making IS_ERR() check fail. This
would then cause a NULL ptr deference in @buffer when accessing it
later in smb2_ioctl_query_ioctl(). While at it, prevent having a
@buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO
FileEndOfFileInformation requests when
smb_query_info::flags=PASSTHRU_SET_INFO.
Here is a small C reproducer which triggers a NULL ptr in @buffer when
passing an invalid smb_query_info::flags
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define die(s) perror(s), exit(1)
#define QUERY_INFO 0xc018cf07
int main(int argc, char *argv[])
{
int fd;
if (argc < 2)
exit(1);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
die("open");
if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
die("ioctl");
close(fd);
return 0;
}
mount.cifs //srv/share /mnt -o ...
gcc repro.c && ./a.out /mnt/f0
[ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1
[ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
[ 114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
[ 114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
[ 114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
[ 114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
[ 114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000
[ 114.144852] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000
[ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0
[ 114.146131] Call Trace:
[ 114.146291] <TASK>
[ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs]
[ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs]
[ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
[ 114.147775] ? dentry_path_raw+0xa6/0xf0
[ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
[ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs]
[ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs]
[ 114.149371] ? lock_downgrade+0x6f0/0x6f0
[ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs]
[ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0
[ 114.150562] ? __up_read+0x192/0x710
[ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0
[ 114.151025] ? __x64_sys_openat+0x11f/0x1d0
[ 114.151296] __x64_sys_ioctl+0x127/0x190
[ 114.151549] do_syscall_64+0x3b/0x90
[ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 114.152079] RIP: 0033:0x7f7aead043df
[ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24
---truncated--- |
