| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().
pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.
Consider the following case:
CPU1 CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
step 1:
mtk_drm_crtc_atomic_flush:
mtk_drm_crtc_update_config(
!!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
pending_needs_vblank set to true,
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip called again,
pending_needs_vblank is still true
//null pointer
Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Improve SCSI abort handling
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler. |
| In the Linux kernel, the following vulnerability has been resolved:
efi: libstub: only free priv.runtime_map when allocated
priv.runtime_map is only allocated when efi_novamap is not set.
Otherwise, it is an uninitialized value. In the error path, it is freed
unconditionally. Avoid passing an uninitialized value to free_pool.
Free priv.runtime_map only when it was allocated.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: comedi_8255: Correct error in subdevice initialization
The refactoring done in commit 5c57b1ccecc7 ("comedi: comedi_8255: Rework
subdevice initialization functions") to the initialization of the io
field of struct subdev_8255_private broke all cards using the
drivers/comedi/drivers/comedi_8255.c module.
Prior to 5c57b1ccecc7, __subdev_8255_init() initialized the io field
in the newly allocated struct subdev_8255_private to the non-NULL
callback given to the function, otherwise it used a flag parameter to
select between subdev_8255_mmio and subdev_8255_io. The refactoring
removed that logic and the flag, as subdev_8255_mm_init() and
subdev_8255_io_init() now explicitly pass subdev_8255_mmio and
subdev_8255_io respectively to __subdev_8255_init(), only
__subdev_8255_init() never sets spriv->io to the supplied
callback. That spriv->io is NULL leads to a later BUG:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
CPU: 1 PID: 1210 Comm: systemd-udevd Not tainted 6.7.3-x86_64 #1
Hardware name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b
RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00
RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000
R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8
FS: 00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0
Call Trace:
<TASK>
? __die_body+0x15/0x57
? page_fault_oops+0x2ef/0x33c
? insert_vmap_area.constprop.0+0xb6/0xd5
? alloc_vmap_area+0x529/0x5ee
? exc_page_fault+0x15a/0x489
? asm_exc_page_fault+0x22/0x30
__subdev_8255_init+0x79/0x8d [comedi_8255]
pci_8255_auto_attach+0x11a/0x139 [8255_pci]
comedi_auto_config+0xac/0x117 [comedi]
? __pfx___driver_attach+0x10/0x10
pci_device_probe+0x88/0xf9
really_probe+0x101/0x248
__driver_probe_device+0xbb/0xed
driver_probe_device+0x1a/0x72
__driver_attach+0xd4/0xed
bus_for_each_dev+0x76/0xb8
bus_add_driver+0xbe/0x1be
driver_register+0x9a/0xd8
comedi_pci_driver_register+0x28/0x48 [comedi_pci]
? __pfx_pci_8255_driver_init+0x10/0x10 [8255_pci]
do_one_initcall+0x72/0x183
do_init_module+0x5b/0x1e8
init_module_from_file+0x86/0xac
__do_sys_finit_module+0x151/0x218
do_syscall_64+0x72/0xdb
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f72f50a0cb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 71 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd47e512d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000562dd06ae070 RCX: 00007f72f50a0cb9
RDX: 0000000000000000 RSI: 00007f72f52d32df RDI: 000000000000000e
RBP: 0000000000000000 R08: 00007f72f5168b20 R09: 0000000000000000
R10: 0000000000000050 R11: 0000000000000246 R12: 00007f72f52d32df
R13: 0000000000020000 R14: 0000562dd06785c0 R15: 0000562dcfd0e9a8
</TASK>
Modules linked in: 8255_pci(+) comedi_8255 comedi_pci comedi intel_gtt e100(+) acpi_cpufreq rtc_cmos usbhid
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b
RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00
RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000
R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8
FS:
---truncated--- |
| Path Traversal in the Manager component of Wowza Streaming Engine below 4.9.1 allows an administrator user to delete any directory on the file system if the target directory contains an XML definition file. |
| Path Traversal in the Manager component of Wowza Streaming Engine below 4.9.1 allows an administrator user to create an XML definition file anywhere on the file system. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: max9759: fix underflow in speaker_gain_control_put()
Check for negative values of "priv->gain" to prevent an out of bounds
access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()
-> snd_ctl_elem_write()
-> kctl->put() |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/dmem: handle kcalloc() allocation failure
The kcalloc() in nouveau_dmem_evict_chunk() will return null if
the physical memory has run out. As a result, if we dereference
src_pfns, dst_pfns or dma_addrs, the null pointer dereference bugs
will happen.
Moreover, the GPU is going away. If the kcalloc() fails, we could not
evict all pages mapping a chunk. So this patch adds a __GFP_NOFAIL
flag in kcalloc().
Finally, as there is no need to have physically contiguous memory,
this patch switches kcalloc() to kvcalloc() in order to avoid
failing allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix TX channel offset when using legacy interrupts
In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but
that's not correct if efx_sepparate_tx_channels is false. In that case,
the offset is 0 because the tx queues are in the single existing channel
at index 0, together with the rx queue.
Without this fix, as soon as you try to send any traffic, it tries to
get the tx queues from an uninitialized channel getting these errors:
WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...] |
| Path Traversal in the Manager component of Wowza Streaming Engine below 4.9.1 allows an administrator user to read any file on the file system if the target directory contains an XML definition file. |
| In the Linux kernel before 4.8, usb_parse_endpoint in drivers/usb/core/config.c does not validate the wMaxPacketSize field of an endpoint descriptor. NOTE: This vulnerability only affects products that are no longer supported by the supplier. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
Architectures like powerpc add debug checks to ensure we find only devmap
PUD pte entries. These debug checks are only done with CONFIG_DEBUG_VM.
This patch marks the ptes used for PUD advanced test devmap pte entries so
that we don't hit on debug checks on architecture like ppc64 as below.
WARNING: CPU: 2 PID: 1 at arch/powerpc/mm/book3s64/radix_pgtable.c:1382 radix__pud_hugepage_update+0x38/0x138
....
NIP [c0000000000a7004] radix__pud_hugepage_update+0x38/0x138
LR [c0000000000a77a8] radix__pudp_huge_get_and_clear+0x28/0x60
Call Trace:
[c000000004a2f950] [c000000004a2f9a0] 0xc000000004a2f9a0 (unreliable)
[c000000004a2f980] [000d34c100000000] 0xd34c100000000
[c000000004a2f9a0] [c00000000206ba98] pud_advanced_tests+0x118/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388
Also
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:202!
....
NIP [c000000000096510] pudp_huge_get_and_clear_full+0x98/0x174
LR [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
Call Trace:
[c000000004a2f950] [000d34c100000000] 0xd34c100000000 (unreliable)
[c000000004a2f9a0] [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn401_init_hw
This commit addresses a potential null pointer dereference issue in the
`dcn401_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.
The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:416 dcn401_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 225) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for function pointer in dcn401_set_output_transfer_func
This commit adds a null check for the set_output_gamma function pointer
in the dcn401_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null, but then it was being
dereferenced without any null check. This could lead to a null pointer
dereference if set_output_gamma is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2)
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be
null at line 8388, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor()
error: we previously assumed 'afb' could be null (see line 8388) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check stream_status before it is used
[WHAT & HOW]
dc_state_get_stream_status can return null, and therefore null must be
checked before stream_status is used.
This fixes 1 NULL_RETURNS issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Disable DMCUB timeout for DCN35
[Why]
DMCUB can intermittently take longer than expected to process commands.
Old ASIC policy was to continue while logging a diagnostic error - which
works fine for ASIC without IPS, but with IPS this could lead to a race
condition where we attempt to access DCN state while it's inaccessible,
leading to a system hang when the NIU port is not disabled or register
accesses that timeout and the display configuration in an undefined
state.
[How]
We need to investigate why these accesses take longer than expected, but
for now we should disable the timeout on DCN35 to avoid this race
condition. Since the waits happen only at lower interrupt levels the
risk of taking too long at higher IRQ and causing a system watchdog
timeout are minimal. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Run DC_LOG_DC after checking link->link_enc
[WHAT]
The DC_LOG_DC should be run after link->link_enc is checked, not before.
This fixes 1 REVERSE_INULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add otg_master NULL check within resource_log_pipe_topology_update
[Why]
Coverity reports NULL_RETURN warning.
[How]
Add otg_master NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401
When users run the command:
cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log
The following NULL pointer dereference happens:
[ +0.000003] BUG: kernel NULL pointer dereference, address: NULL
[ +0.000005] #PF: supervisor instruction fetch in kernel mode
[ +0.000002] #PF: error_code(0x0010) - not-present page
[ +0.000002] PGD 0 P4D 0
[ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI
[ +0.000003] RIP: 0010:0x0
[ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[...]
[ +0.000002] PKRU: 55555554
[ +0.000002] Call Trace:
[ +0.000002] <TASK>
[ +0.000003] ? show_regs+0x65/0x70
[ +0.000006] ? __die+0x24/0x70
[ +0.000004] ? page_fault_oops+0x160/0x470
[ +0.000006] ? do_user_addr_fault+0x2b5/0x690
[ +0.000003] ? prb_read_valid+0x1c/0x30
[ +0.000005] ? exc_page_fault+0x8c/0x1a0
[ +0.000005] ? asm_exc_page_fault+0x27/0x30
[ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu]
[ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000003] ? vsnprintf+0x2fb/0x600
[ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu]
[ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170
[ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? debug_smp_processor_id+0x17/0x20
[ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? set_ptes.isra.0+0x2b/0x90
[ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? _raw_spin_unlock+0x19/0x40
[ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? do_anonymous_page+0x337/0x700
[ +0.000004] dtn_log_read+0x82/0x120 [amdgpu]
[ +0.000207] full_proxy_read+0x66/0x90
[ +0.000007] vfs_read+0xb0/0x340
[ +0.000005] ? __count_memcg_events+0x79/0xe0
[ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40
[ +0.000003] ? handle_mm_fault+0xb2/0x370
[ +0.000003] ksys_read+0x6b/0xf0
[ +0.000004] __x64_sys_read+0x19/0x20
[ +0.000003] do_syscall_64+0x60/0x130
[ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ +0.000003] RIP: 0033:0x7fdf32f147e2
[...]
This error happens when the color log tries to read the gamut remap
information from DCN401 which is not initialized in the dcn401_dpp_funcs
which leads to a null pointer dereference. This commit addresses this
issue by adding a proper guard to access the gamut_remap callback in
case the specific ASIC did not implement this function. |
