| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Prevent UAF caused by non-leader exec() race
Wongi and Jungwoo decoded and reported a non-leader exec() related race
which can result in an UAF:
sys_timer_delete() exec()
posix_cpu_timer_del()
// Observes old leader
p = pid_task(pid, pid_type); de_thread()
switch_leader();
release_task(old_leader)
__exit_signal(old_leader)
sighand = lock(old_leader, sighand);
posix_cpu_timers*_exit();
sighand = lock_task_sighand(p) unhash_task(old_leader);
sh = lock(p, sighand) old_leader->sighand = NULL;
unlock(sighand);
(p->sighand == NULL)
unlock(sh)
return NULL;
// Returns without action
if(!sighand)
return 0;
free_posix_timer();
This is "harmless" unless the deleted timer was armed and enqueued in
p->signal because on exec() a TGID targeted timer is inherited.
As sys_timer_delete() freed the underlying posix timer object
run_posix_cpu_timers() or any timerqueue related add/delete operations on
other timers will access the freed object's timerqueue node, which results
in an UAF.
There is a similar problem vs. posix_cpu_timer_set(). For regular posix
timers it just transiently returns -ESRCH to user space, but for the use
case in do_cpu_nanosleep() it's the same UAF just that the k_itimer is
allocated on the stack.
Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stops
to expire.
While debating solutions Frederic pointed out another problem:
posix_cpu_timer_del(tmr)
__exit_signal(p)
posix_cpu_timers*_exit(p);
unhash_task(p);
p->sighand = NULL;
sh = lock_task_sighand(p)
sighand = p->sighand;
if (!sighand)
return NULL;
lock(sighand);
if (!sh)
WARN_ON_ONCE(timer_queued(tmr));
On weakly ordered architectures it is not guaranteed that
posix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit()
when p->sighand is observed as NULL, which means the WARN() can be a false
positive.
Solve these issues by:
1) Changing the store in __exit_signal() to smp_store_release().
2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path
of lock_task_sighand().
3) Creating a helper function for looking up the task and locking sighand
which does not return when sighand == NULL. Instead it retries the
task lookup and only if that fails it gives up.
4) Using that helper in the three affected functions.
#1/#2 ensures that the reader side which observes sighand == NULL also
observes all preceeding stores, i.e. the stores in posix_cpu_timers*_exit()
and the ones in unhash_task().
#3 ensures that the above described non-leader exec() situation is handled
gracefully. When the task lookup returns the old leader, but sighand ==
NULL then it retries. In the non-leader exec() case the subsequent task
lookup will observe the new leader due to #1/#2. In normal exit() scenarios
the subsequent lookup fails.
When the task lookup fails, the function also checks whether the timer is
still enqueued and issues a warning if that's the case. Unfortunately there
is nothing which can be done about it, but as the task is already not
longer visible the timer should not be accessed anymore. This check also
requires memory ordering, which is not provided when the first lookup
fails. To achieve that the check is preceeded by a smp_rmb() which pairs
with the smp_wmb() in write_seqlock() in __exit_signal(). That ensures that
the stores in posix_cpu_timers*_exit() are visible.
The history of the non-leader exec() issue goes back to the early days of
posix CPU timers, which stored a pointer to the group leader task in the
timer. That obviously fails when a non-leader exec() switches the leader.
commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problems
with mt exec") added a temporary workaround for that in 2010 which surv
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()
l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.
Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.
Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Detach event groups during remove_on_exec
perf_event_remove_on_exec() removes events by calling
perf_event_exit_event(). For top-level events, this removes the event from
the context with DETACH_EXIT only.
This can leave inconsistent group state when a removed event is a group
leader and the group contains siblings without remove_on_exec. If the group
was active, the surviving siblings can remain active and attached to the
removed leader's sibling list, but are no longer represented by a valid
group leader on the PMU context active lists.
A later close of the removed leader uses DETACH_GROUP and can promote the
still-active siblings from this stale group state. The next schedule-in can
then add an already-linked active_list entry again, corrupting the PMU
context active list.
With DEBUG_LIST enabled, this is caught as a list_add double-add in
merge_sched_in().
Fix this by detaching group relationships when remove_on_exec removes an
event. This preserves the existing task-exit and revoke behavior, while
ensuring surviving siblings are ungrouped before the removed event leaves
the context. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix len check in receive_big()
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: net1080: validate packet_len before pad-byte access in rx_fixup
For an even packet_len, net1080_rx_fixup() reads the pad byte at
skb->data[packet_len] before the skb->len != packet_len check further
down, and packet_len is only bounded against NC_MAX_PACKET. A malicious
NetChip 1080 device can send a short frame advertising a large even
packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the
skb:
BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup
Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14
...
net1080_rx_fixup (drivers/net/usb/net1080.c:384)
usbnet_bh (drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3708)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
...
Reject the frame when packet_len >= skb->len before reading. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: check master for NULL in xdp_master_redirect()
xdp_master_redirect() dereferences the result of
netdev_master_upper_dev_get_rcu() without a NULL check, but that helper
returns NULL when the receiving device has no upper-master adjacency.
The reach guard only checks netif_is_bond_slave(). On bond slave release
bond_upper_dev_unlink() drops the upper-master adjacency before clearing
IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window
still passes netif_is_bond_slave() while master is already NULL, and
faults on master->flags at offset 0xb0:
BUG: kernel NULL pointer dereference, address: 00000000000000b0
RIP: 0010:xdp_master_redirect (net/core/filter.c:4432)
Call Trace:
xdp_master_redirect (net/core/filter.c:4432)
bpf_prog_run_generic_xdp (include/net/xdp.h:700)
do_xdp_generic (net/core/dev.c:5608)
__netif_receive_skb_one_core (net/core/dev.c:6204)
process_backlog (net/core/dev.c:6319)
__napi_poll (net/core/dev.c:7729)
net_rx_action (net/core/dev.c:7792)
handle_softirqs (kernel/softirq.c:622)
__dev_queue_xmit (include/linux/bottom_half.h:33)
packet_sendmsg (net/packet/af_packet.c:3082)
__sys_sendto (net/socket.c:2252)
Kernel panic - not syncing: Fatal exception in interrupt
The missing check dates back to the original code; commit 1921f91298d1
("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master")
later added the master->flags read where the fault now lands but kept the
unconditional deref. Check master for NULL before use; a NULL master is
treated the same as one that is not up. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path
In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected,
nvmet_req_uninit() is called unconditionally. However, if the command
arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init()
had returned false and percpu_ref_tryget_live() was never executed. The
unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a
refcount underflow, leading to a WARNING in
percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and
eventually a permanent workqueue deadlock.
Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling
nvmet_req_uninit(), matching the existing pattern in
nvmet_tcp_execute_request(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate lcns_follow in log_replay conversion
log_replay() converts DIR_PAGE_ENTRY_32 records into DIR_PAGE_ENTRY
records when replaying version 0 restart tables.
During this conversion, the memmove() length is derived directly from
the on-disk lcns_follow field:
memmove(&dp->vcn, &dp0->vcn_low,
2 * sizeof(u64) +
le32_to_cpu(dp->lcns_follow) * sizeof(u64));
check_rstbl() validates restart table structure, but does not constrain
per-entry lcns_follow values relative to the entry size. A malformed
filesystem image can provide an oversized lcns_follow value, causing
the conversion memmove() to access memory beyond the bounds of the
allocated restart table buffer.
The same field is later used to bound iteration over page_lcns[],
so validating lcns_follow during conversion also prevents downstream
out-of-bounds access from the same malformed metadata.
Compute the maximum valid lcns_follow from the already-validated
restart table entry size and reject entries that exceed this bound.
Reuse the existing t16/t32 scratch variables already declared in
log_replay() to avoid introducing new declarations.
[almaz.alexandrovich@paragon-software.com: fixed the conflicts] |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: nlink overflow in jfs_rename
If nlink is maximal for a directory (-1) and inside that directory you
perform a rename for some child directory (not moving from the parent),
then the nlink of the first directory is first incremented and later
decremented. Normally this is fine, but when nlink = -1 this causes a
wrap around to 0, and then drop_nlink issues a warning.
After applying the patch syzbot no longer issues any warnings. I also
ran some basic fs tests to look for any regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: core: fix race in driver_override_show() and use core helper
The driver_override_show function reads the driver_override string
without holding the device_lock. However, the store function modifies
and frees the string while holding the device_lock. This creates a race
condition where the string can be freed by the store function while
being read by the show function, leading to a use-after-free.
To fix this, replace the rpmsg_string_attr macro with explicit show and
store functions. The new driver_override_store uses the standard
driver_set_override helper. Since the introduction of
driver_set_override, the comments in include/linux/rpmsg.h have stated
that this helper must be used to set or clear driver_override, but the
implementation was not updated until now.
Because driver_set_override modifies and frees the string while holding
the device_lock, the new driver_override_show now correctly holds the
device_lock during the read operation to prevent the race.
Additionally, since rpmsg_string_attr has only ever been used for
driver_override, removing the macro simplifies the code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate sp before freeing associated memory
System crash with the following signature
[154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete
[154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3.
[154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5.
[154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000.
[154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000.
[154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8
[154565.553080] #PF: supervisor read access in kernel mode
[154565.553082] #PF: error_code(0x0000) - not-present page
[154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0
[154565.553089] Oops: 0000 1 PREEMPT SMP PTI
[154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1
[154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024
[154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b
[154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286
[154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002
[154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47
[154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a
[154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0
[154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000
[154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000
[154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0
[154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[154565.553159] PKRU: 55555554
[154565.553160] Call Trace:
[154565.553162] <TASK>
[154565.553165] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553172] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553215] ? __die_body.cold+0x8/0xd
[154565.553218] ? page_fault_oops+0x134/0x170
[154565.553223] ? snprintf+0x49/0x70
[154565.553229] ? exc_page_fault+0x62/0x150
[154565.553238] ? asm_exc_page_fault+0x22/0x30
Check for sp being non NULL before freeing any associated memory |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue()
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: fix a double free in snd_ac97_controller_register()
If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: disable recursive forward error correction
There are two problems with the recursive correction:
1. It may cause denial-of-service. In fec_read_bufs, there is a loop that
has 253 iterations. For each iteration, we may call verity_hash_for_block
recursively. There is a limit of 4 nested recursions - that means that
there may be at most 253^4 (4 billion) iterations. Red Hat QE team
actually created an image that pushes dm-verity to this limit - and this
image just makes the udev-worker process get stuck in the 'D' state.
2. It doesn't work. In fec_read_bufs we store data into the variable
"fio->bufs", but fio bufs is shared between recursive invocations, if
"verity_hash_for_block" invoked correction recursively, it would
overwrite partially filled fio->bufs. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node()
Previously, btrfs_get_or_create_delayed_node() set the delayed_node's
refcount before acquiring the root->delayed_nodes lock.
Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes")
moved refcount_set inside the critical section, which means there is
no longer a memory barrier between setting the refcount and setting
btrfs_inode->delayed_node.
Without that barrier, the stores to node->refs and
btrfs_inode->delayed_node may become visible out of order. Another
thread can then read btrfs_inode->delayed_node and attempt to
increment a refcount that hasn't been set yet, leading to a
refcounting bug and a use-after-free warning.
The fix is to move refcount_set back to where it was to take
advantage of the implicit memory barrier provided by lock
acquisition.
Because the allocations now happen outside of the lock's critical
section, they can use GFP_NOFS instead of GFP_ATOMIC. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: ensure worker is torn down
When an IRQ worker is running, unplugging the device would cause a
crash. The sealevel hardware this driver was written for was not
hotpluggable, so I never realized it.
This change uses a spinlock to protect a list of workers, which
it tears down on disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix refcount leak when invalid session is found on session lookup
When a session is found but its state is not SMB2_SESSION_VALID, It
indicates that no valid session was found, but it is missing to decrement
the reference count acquired by the session lookup, which results in
a reference count leak. This patch fixes the issue by explicitly calling
ksmbd_user_session_put to release the reference to the session. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix leaked ct in error paths
There are some situations where ct might be leaked as error paths are
skipping the refcounted check and return immediately. In order to solve
it make sure that the check is always called. |
