| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't attempt to schedule hpd_work on headless cards
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set. |
| In the Linux kernel, the following vulnerability has been resolved:
ionic: fix kernel panic in XDP_TX action
In the XDP_TX path, ionic driver sends a packet to the TX path with rx
page and corresponding dma address.
After tx is done, ionic_tx_clean() frees that page.
But RX ring buffer isn't reset to NULL.
So, it uses a freed page, which causes kernel panic.
BUG: unable to handle page fault for address: ffff8881576c110c
PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060
Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8
RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283
RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002
RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e
RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8
R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100
FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x254/0x790
? __pfx_page_fault_oops+0x10/0x10
? __pfx_is_prefetch.constprop.0+0x10/0x10
? search_bpf_extables+0x165/0x260
? fixup_exception+0x4a/0x970
? exc_page_fault+0xcb/0xe0
? asm_exc_page_fault+0x22/0x30
? 0xffffffffc0051f64
? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
? do_raw_spin_unlock+0x54/0x220
ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
__napi_poll.constprop.0+0xa0/0x440
net_rx_action+0x7e7/0xc30
? __pfx_net_rx_action+0x10/0x10 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: validate mandatory meta and payload
Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
(cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305) |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown
The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown()
will return 1 when pm runtime state is active, and we don't want to
get the warning message in this case.
So we change the return value < 0 for WARN_ON(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: fix missing sk_buff release in seg6_input_core
The seg6_input() function is responsible for adding the SRH into a
packet, delegating the operation to the seg6_input_core(). This function
uses the skb_cow_head() to ensure that there is sufficient headroom in
the sk_buff for accommodating the link-layer header.
In the event that the skb_cow_header() function fails, the
seg6_input_core() catches the error but it does not release the sk_buff,
which will result in a memory leak.
This issue was introduced in commit af3b5158b89d ("ipv6: sr: fix BUG due
to headroom too small after SRH push") and persists even after commit
7a3f5b0de364 ("netfilter: add netfilter hooks to SRv6 data plane"),
where the entire seg6_input() code was refactored to deal with netfilter
hooks.
The proposed patch addresses the identified memory leak by requiring the
seg6_input_core() function to release the sk_buff in the event that
skb_cow_head() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_file: Fix pid refcounting race
<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>
filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:
process A process B
========= =========
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid B>, 1)
mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here ***
get_pid(<pid B>) *** UAF ***
synchronize_rcu()
put_pid(<pid A>)
As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.
This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().
Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.
This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: do not call vma_add_reservation upon ENOMEM
sysbot reported a splat [1] on __unmap_hugepage_range(). This is because
vma_needs_reservation() can return -ENOMEM if
allocate_file_region_entries() fails to allocate the file_region struct
for the reservation.
Check for that and do not call vma_add_reservation() if that is the case,
otherwise region_abort() and region_del() will see that we do not have any
file_regions.
If we detect that vma_needs_reservation() returned -ENOMEM, we clear the
hugetlb_restore_reserve flag as if this reservation was still consumed, so
free_huge_folio() will not increment the resv count.
[1] https://lore.kernel.org/linux-mm/0000000000004096100617c58d54@google.com/T/#ma5983bc1ab18a54910da83416b3f89f3c7ee43aa |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/qcom/lmh: Check for SCM availability at probe
Up until now, the necessary scm availability check has not been
performed, leading to possible null pointer dereferences (which did
happen for me on RB1).
Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mgb4: Fix double debugfs remove
Fixes an error where debugfs_remove_recursive() is called first on a parent
directory and then again on a child which causes a kernel panic.
[hverkuil: added Fixes/Cc tags] |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l: async: Fix notifier list entry init
struct v4l2_async_notifier has several list_head members, but only
waiting_list and done_list are initialized. notifier_entry was kept
'zeroed' leading to an uninitialized list_head.
This results in a NULL-pointer dereference if csi2_async_register() fails,
e.g. node for remote endpoint is disabled, and returns -ENOTCONN.
The following calls to v4l2_async_nf_unregister() results in a NULL
pointer dereference.
Add the missing list head initializer. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: bcm: dvp: Assign ->num before accessing ->hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
clk_dvp_probe() due to ->num being assigned after ->hws has been
accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2
index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: bcm: rpi: Assign ->num before accessing ->hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
raspberrypi_discover_clocks() due to ->num being assigned after ->hws
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4
index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix uninit-value in p9_client_rpc()
Syzbot with the help of KMSAN reported the following error:
BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline]
BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754
trace_9p_client_res include/trace/events/9p.h:146 [inline]
p9_client_rpc+0x1314/0x1340 net/9p/client.c:754
p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031
v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410
v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122
legacy_get_tree+0x114/0x290 fs/fs_context.c:662
vfs_get_tree+0xa7/0x570 fs/super.c:1797
do_new_mount+0x71f/0x15e0 fs/namespace.c:3352
path_mount+0x742/0x1f20 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount+0x725/0x810 fs/namespace.c:3875
__x64_sys_mount+0xe4/0x150 fs/namespace.c:3875
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
__alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
alloc_slab_page mm/slub.c:2175 [inline]
allocate_slab mm/slub.c:2338 [inline]
new_slab+0x2de/0x1400 mm/slub.c:2391
___slab_alloc+0x1184/0x33d0 mm/slub.c:3525
__slab_alloc mm/slub.c:3610 [inline]
__slab_alloc_node mm/slub.c:3663 [inline]
slab_alloc_node mm/slub.c:3835 [inline]
kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852
p9_tag_alloc net/9p/client.c:278 [inline]
p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641
p9_client_rpc+0x27e/0x1340 net/9p/client.c:688
p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031
v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410
v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122
legacy_get_tree+0x114/0x290 fs/fs_context.c:662
vfs_get_tree+0xa7/0x570 fs/super.c:1797
do_new_mount+0x71f/0x15e0 fs/namespace.c:3352
path_mount+0x742/0x1f20 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount+0x725/0x810 fs/namespace.c:3875
__x64_sys_mount+0xe4/0x150 fs/namespace.c:3875
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag
will not be properly initialized. However, trace_9p_client_res()
ends up trying to print it out anyway before p9_client_rpc()
finishes.
Fix this issue by assigning default values to p9_fcall fields
such as 'tag' and (just in case KMSAN unearths something new) 'id'
during the tag allocation stage. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: PAC1934: fix accessing out of bounds array index
Fix accessing out of bounds array index for average
current and voltage measurements. The device itself has
only 4 channels, but in sysfs there are "fake"
channels for the average voltages and currents too. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
Hang on to the control IDs instead of pointers since those are correctly
handled with locks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: re-fix fortified-memset warning
The carl9170_tx_release() function sometimes triggers a fortified-memset
warning in my randconfig builds:
In file included from include/linux/string.h:254,
from drivers/net/wireless/ath/carl9170/tx.c:40:
In function 'fortify_memset_chk',
inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2,
inlined from 'kref_put' at include/linux/kref.h:65:3,
inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9:
include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
493 | __write_overflow_field(p_size_field, size);
Kees previously tried to avoid this by using memset_after(), but it seems
this does not fully address the problem. I noticed that the memset_after()
here is done on a different part of the union (status) than the original
cast was from (rate_driver_data), which may confuse the compiler.
Unfortunately, the memset_after() trick does not work on driver_rates[]
because that is part of an anonymous struct, and I could not get
struct_group() to do this either. Using two separate memset() calls
on the two members does address the warning though. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: connac: check for null before dereferencing
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate slices count returned by FW
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW. |
