| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix NULL module pointer assignment at card init
The commit 81033c6b584b ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.
For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.
Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()
pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action()
fails, the irq vector is not freed, which leads to a memory leak.
Replace the devm_add_action with devm_add_action_or_reset to ensure
the irq vector can be destroyed when it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: sungem: remove .ndo_poll_controller to avoid deadlocks
Erhard reports netpoll warnings from sungem:
netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398)
WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c
gem_poll_controller() disables interrupts, which may sleep.
We can't sleep in netpoll, it has interrupts disabled completely.
Strangely, gem_poll_controller() doesn't even poll the completions,
and instead acts as if an interrupt has fired so it just schedules
NAPI and exits. None of this has been necessary for years, since
netpoll invokes NAPI directly. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Modify the print level of CQE error
Too much print may lead to a panic in kernel. Change ibdev_err() to
ibdev_err_ratelimited(), and change the printing level of cqe dump
to debug level. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix buffer overflow in print_cpu_stall_info()
The rcuc-starvation output from print_cpu_stall_info() might overflow the
buffer if there is a huge difference in jiffies difference. The situation
might seem improbable, but computers sometimes get very confused about
time, which can result in full-sized integers, and, in this case,
buffer overflow.
Also, the unsigned jiffies difference is printed using %ld, which is
normally for signed integers. This is intentional for debugging purposes,
but it is not obvious from the code.
This commit therefore changes sprintf() to snprintf() and adds a
clarifying comment about intention of %ld format.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Prevent null-pointer dereference when prog to load has no BTF
In bpf_objec_load_prog(), there's no guarantee that obj->btf is non-NULL
when passing it to btf__fd(), and this function does not perform any
check before dereferencing its argument (as bpf_object__btf_fd() used to
do). As a consequence, we get segmentation fault errors in bpftool (for
example) when trying to load programs that come without BTF information.
v2: Keep btf__fd() in the fix instead of reverting to bpf_object__btf_fd(). |
| In the Linux kernel, the following vulnerability has been resolved:
cppc_cpufreq: Fix possible null pointer dereference
cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from
different places with various parameters. So cpufreq_cpu_get() can return
null as 'policy' in some circumstances.
Fix this bug by adding null return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/tsens: Fix null pointer dereference
compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c)
as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null
pointer dereference (if DEBUG or DYNAMIC_DEBUG set).
Fix this bug by adding null pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out of
bounds when writing data to the event_group array. If the number of events
in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write
overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}' |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out
of bounds when writing data to the event_group array. If the number of
events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the
memory write overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/} |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature
Without this commit, reading chip temperature will cause memory leakage. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: Avoid address calculations via out of bounds array indexing
Before request->channels[] can be used, request->n_channels must be set.
Additionally, address calculations for memory after the "channels" array
need to be calculated from the allocation base ("request") rather than
via the first "out of bounds" index of "channels", otherwise run-time
bounds checking will throw a warning. |
| In the Linux kernel, the following vulnerability has been resolved:
kunit: Fix kthread reference
There is a race condition when a kthread finishes after the deadline and
before the call to kthread_stop(), which may lead to use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: Assign dummy when codec not specified for a DAI link
MediaTek sound card drivers are checking whether a DAI link is present
and used on a board to assign the correct parameters and this is done
by checking the codec DAI names at probe time.
If no real codec is present, assign the dummy codec to the DAI link
to avoid NULL pointer during string comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference
In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is
assigned to mhdp_state->current_mode, and there is a dereference of it in
drm_mode_set_name(), which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate().
Fix this bug add a check of mhdp_state->current_mode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: vc4: Fix possible null pointer dereference
In vc4_hdmi_audio_init() of_get_address() may return
NULL which is later dereferenced. Fix this bug by adding NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/test_hmm.c: handle src_pfns and dst_pfns allocation failure
The kcalloc() in dmirror_device_evict_chunk() will return null if the
physical memory has run out. As a result, if src_pfns or dst_pfns is
dereferenced, the null pointer dereference bug will happen.
Moreover, the device is going away. If the kcalloc() fails, the pages
mapping a chunk could not be evicted. So add a __GFP_NOFAIL flag in
kcalloc().
Finally, as there is no need to have physically contiguous memory, Switch
kcalloc() to kvcalloc() in order to avoid failing allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw
When running blktests nvme/rdma, the following kmemleak issue will appear.
kmemleak: Kernel memory leak detector initialized (mempool available:36041)
kmemleak: Automatic memory scanning thread started
kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 8 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 17 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
unreferenced object 0xffff88855da53400 (size 192):
comm "rdma", pid 10630, jiffies 4296575922
hex dump (first 32 bytes):
37 00 00 00 00 00 00 00 c0 ff ff ff 1f 00 00 00 7...............
10 34 a5 5d 85 88 ff ff 10 34 a5 5d 85 88 ff ff .4.].....4.]....
backtrace (crc 47f66721):
[<ffffffff911251bd>] kmalloc_trace+0x30d/0x3b0
[<ffffffffc2640ff7>] alloc_gid_entry+0x47/0x380 [ib_core]
[<ffffffffc2642206>] add_modify_gid+0x166/0x930 [ib_core]
[<ffffffffc2643468>] ib_cache_update.part.0+0x6d8/0x910 [ib_core]
[<ffffffffc2644e1a>] ib_cache_setup_one+0x24a/0x350 [ib_core]
[<ffffffffc263949e>] ib_register_device+0x9e/0x3a0 [ib_core]
[<ffffffffc2a3d389>] 0xffffffffc2a3d389
[<ffffffffc2688cd8>] nldev_newlink+0x2b8/0x520 [ib_core]
[<ffffffffc2645fe3>] rdma_nl_rcv_msg+0x2c3/0x520 [ib_core]
[<ffffffffc264648c>]
rdma_nl_rcv_skb.constprop.0.isra.0+0x23c/0x3a0 [ib_core]
[<ffffffff9270e7b5>] netlink_unicast+0x445/0x710
[<ffffffff9270f1f1>] netlink_sendmsg+0x761/0xc40
[<ffffffff9249db29>] __sys_sendto+0x3a9/0x420
[<ffffffff9249dc8c>] __x64_sys_sendto+0xdc/0x1b0
[<ffffffff92db0ad3>] do_syscall_64+0x93/0x180
[<ffffffff92e00126>] entry_SYSCALL_64_after_hwframe+0x71/0x79
The root cause: rdma_put_gid_attr is not called when sgid_attr is set
to ERR_PTR(-ENODEV). |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: fix vlan use-after-free
syzbot reported a suspicious rcu usage[1] in bridge's mst code. While
fixing it I noticed that nothing prevents a vlan to be freed while
walking the list from the same path (br forward delay timer). Fix the rcu
usage and also make sure we are not accessing freed memory by making
br_mst_vlan_set_state use rcu read lock.
[1]
WARNING: suspicious RCU usage
6.9.0-rc6-syzkaller #0 Not tainted
-----------------------------
net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage!
...
stack backtrace:
CPU: 1 PID: 8017 Comm: syz-executor.1 Not tainted 6.9.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712
nbp_vlan_group net/bridge/br_private.h:1599 [inline]
br_mst_set_state+0x1ea/0x650 net/bridge/br_mst.c:105
br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47
br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88
call_timer_fn+0x18e/0x650 kernel/time/timer.c:1793
expire_timers kernel/time/timer.c:1844 [inline]
__run_timers kernel/time/timer.c:2418 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2429
run_timer_base kernel/time/timer.c:2438 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2448
__do_softirq+0x2c6/0x980 kernel/softirq.c:554
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633
irq_exit_rcu+0x9/0x30 kernel/softirq.c:645
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
RIP: 0010:lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758
Code: 2b 00 74 08 4c 89 f7 e8 ba d1 84 00 f6 44 24 61 02 0f 85 85 01 00 00 41 f7 c7 00 02 00 00 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 25 00 00 00 00 00 43 c7 44 25 09 00 00 00 00 43 c7 44 25
RSP: 0018:ffffc90013657100 EFLAGS: 00000206
RAX: 0000000000000001 RBX: 1ffff920026cae2c RCX: 0000000000000001
RDX: dffffc0000000000 RSI: ffffffff8bcaca00 RDI: ffffffff8c1eaa60
RBP: ffffc90013657260 R08: ffffffff92efe507 R09: 1ffffffff25dfca0
R10: dffffc0000000000 R11: fffffbfff25dfca1 R12: 1ffff920026cae28
R13: dffffc0000000000 R14: ffffc90013657160 R15: 0000000000000246 |
