| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: bound mode sysfs output to the sysfs buffer
mode_string() uses snprintf() which can return a value larger than the
remaining buffer space. show_modes() accumulates the return value into i
without checking whether i has reached PAGE_SIZE, causing the offset to
advance past the sysfs buffer if the modelist is long enough.
Add a size parameter to mode_string() and use scnprintf() to return
only the bytes actually written. Add an early return when offset
already exceeds the buffer. In show_modes(), stop accumulating once
the buffer is full. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/qeth: validate user buffer length in SNMP and ARP query ioctls
qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by
a user-supplied length (udata_len) without checking a lower bound, then
set udata_offset to a fixed non-zero value and pass both to a reply
callback. The callback bounds-checks the copy with
if ((udata_len - udata_offset) < len)
Both fields are u32, so a udata_len smaller than udata_offset makes the
subtraction wrap and the check pass, and the following memcpy() writes
past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from
kzalloc(), which the existing NULL check does not catch.
Reject buffers smaller than udata_offset before allocating, so the
callback subtraction can no longer underflow. |
| A WebFlux application using functional endpoints and deployed with DispatcherServlet may be vulnerable to a header predicate bypass in a pre-flight request.
Spring Framework 7.0.0 - 7.0.8
Spring Framework 6.2.0 - 6.2.19
Spring Framework 6.1.0 - 6.1.28
Spring Framework 6.0.0 - 6.0.30
Spring Framework 5.3.0 - 5.3.49
Spring Framework 5.2.5.RELEASE - 5.2.25.RELEASE |
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric Corporation CC-Link IE TSN Remote I/O module, CC-Link IE TSN Analog-Digital Converter module, CC-Link IE TSN Digital-Analog Converter module, CC-Link IE TSN FPGA module, CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY, MELSEC iQ-R Series CC-Link IE TSN Master/Local Module, MELSEC iQ-R Series Ethernet Interface Module, CC-Link IE TSN Master/Local Station Communication LSI CP610, MELSEC iQ-F Series FX5 CC-Link IE TSN Master/Local Module, MELSEC iQ-F Series FX5 Ethernet Module, MELSEC iQ-F Series FX5-ENET/IP Ethernet Module, and MELSEC iQ-R Series CPU module allows a remote unauthenticated attacker to cause a Denial of Service condition in the products by sending specially crafted UDP packets. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Fix out of bounds check on CCW array
The routine ccwchain_calc_length() counts the number of channel
command words (CCWs) that are chained together in a single channel
program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs.
The loop itself is "do..while (count < 257)", and while the logic in
is_cpa_within_range() correctly adjusts between the 0-index array of
CCWs and the count of CCWs starting at 1, this means it would look
at a possible 257th CCW before ending the loop and (correctly)
returning an error.
Fix this by restructuring the loop to break as soon as 256 CCWs
(thus indexes 0-255) are examined, without looking at memory
outside the range. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - validate input packet lengths
iforce_process_packet() reads fixed fields from joystick, wheel and
status packets without first checking their lengths. In particular, the
shared hats-and-buttons helper unconditionally reads data[6]. The status
tail is a sequence of 16-bit effect addresses, but an incomplete final
address is also consumed. A successful zero-length USB URB additionally
reads the packet ID before the common parser is called.
Reject the zero-length USB transfer, require the seven-byte joystick and
wheel prefixes and the two-byte status prefix, and consume only complete
status-tail addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: propagate errors from xfs_rtginode_load
xfs_rtginode_ensure() treats every xfs_rtginode_load() error other than
-ENOENT as success. This can leave the realtime group inode unset after an
I/O, allocation, or corruption error. Growfs then continues as though the
inode had been loaded.
Only -ENOENT means that the inode needs to be created. Return all other
errors to the growfs caller. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix off-by-one in rtrefcount btree root level validation
xfs_rtrefcountbt_compute_maxlevels() sets
mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1;
where the trailing "+ 1" already accounts for the inode-root level, so the
deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must
satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels).
The two on-disk validation paths, xfs_rtrefcountbt_verify() and
xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a
crafted rtreflink (metadir + realtime + reflink) image whose
/rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on
mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1,
exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is
sized for exactly bc_maxlevels entries, the first btree op on such a cursor
indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is
reached by the first rtrefcount cursor built after mount, via log/CoW
recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an
FS_IOC_GETFSMAP over the realtime device.
Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form
already used by the sibling data-device refcount/rmap verifiers and the
in-memory rtrmap verifier.
BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101)
Write of size 2 at addr ffff888018391658 by task exploit/144
xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101)
xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308)
xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113)
xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085)
xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551)
xfs_mountfs (fs/xfs/xfs_mount.c:1158)
xfs_fs_fill_super (fs/xfs/xfs_super.c:1940)
get_tree_bdev_flags (fs/super.c:1634)
vfs_get_tree (fs/super.c:1694)
path_mount (fs/namespace.c:4161)
__x64_sys_mount (fs/namespace.c:4367)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216
The buggy address is located 8 bytes to the right of
allocated 216-byte region [ffff888018391578, ffff888018391650)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN
When exchanging two full-file ranges, xmi_can_exchange_reflink_flags()
can move the reflink inode flag from the file that currently has it to
the other file, as long as exactly one side is marked. This assumes
that the file contents, and therefore all shared extents, are exchanged.
That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set.
xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings
from file1, so an exchange can complete without moving every mapping
that the earlier flag-swap decision accounted for. In that case the
post-operation cleanup can clear the reflink flag from an inode that
still owns shared written extents. Later writes then take the
non-reflink write path and may update blocks that should still have
been protected by CoW, which shows up as data corruption between
reflink-related files.
Fix this by disabling the reflink flag exchange whenever
XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still
proceed; the conservative outcome is that both inodes keep the reflink
flag. The regular reflink flag cleanup path can drop the extra flag
later once the inode no longer has shared extents. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused |
