| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix skb length accounting after XDP frag adjustment
veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().
Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
Cancel (and flush) the I/O APIC's delayed EOI handling work during the
"pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI
broadcast will inject another IRQ if the line is asserted, i.e. will try
to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs
are destroyed leads to UAF if the delayed work is processed after vCPUs are
destroyed.
BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218
CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events kvm_ioapic_eoi_inject_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
__kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
__kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345
kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129
ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492
kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532
process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397
worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling
new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e.
requires a live vCPU.
Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase
of VM destruction, but that gets more than a bit sketchy as KVM expects the
I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization
in particular has a bad habit of touching VM-scope state during vCPU
destruction. E.g. attempting to free the PIC during the pre phase would
lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not
hard to imagine the I/O APIC having a similar flaw. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: reject frames without a transaction header
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: convert frag_list skbs before running XDP
A frag_list skb can reach veth with data_len set but nr_frags zero.
veth_convert_skb_to_xdp_buff() only converts skbs that are shared,
locked, have frags[], or do not have enough headroom. It later uses
skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and
xdp_frags_size.
That exposes frag_list data to XDP as if it were stored in frags[], but
frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment
metadata, walk an empty fragment entry, and crash in memcpy() from
__xsk_rcv().
Route non-linear skbs through skb_pp_cow_data() before exposing them to
XDP, and only advertise XDP frags when the resulting skb has frags[].
skb_copy_bits() already handles frag_list input, and skb_pp_cow_data()
builds frags[] output with skb_add_rx_frag(), which is the
representation XDP multi-buffer expects. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use pskb_network_may_pull() for transmit path header pulls
In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was
being called to verify the availability of network layer headers (ARP, IPv6/ND,
IP/IPv6 MDB keys).
However, during transmit skb->data points to the MAC header, so skb_network_offset(skb)
is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data
rather than skb_network_offset(skb) + len, which can leave part of the network header
in non-linear frags.
Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly
account for the MAC header offset. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
ev variable is userspace controlled via event->attr.config and used
as an array index after bounds checking, but without speculation
barriers.
Add the missing array_index_nospec() call to prevent speculative
execution. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move()
hand the raw PERSISTENT RESERVE OUT parameter buffer to
target_parse_pr_out_transport_id() without telling it how many bytes are
valid. For an iSCSI TransportID (FORMAT CODE 01b),
iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with
an unbounded strstr() (and on the error path prints the name with a further
unbounded "%s"). An initiator can submit a TransportID whose iSCSI name
contains neither a ",i,0x" substring nor a NUL terminator, filling the
parameter list to its end, so the scan runs off the end of the buffer.
When the parameter list spans more than one page the buffer is a multi-page
vmap (transport_kmap_data_sg()), so the over-read walks into the trailing
vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It
is reachable by any fabric that delivers a PR OUT to a device exported
through an iSCSI TPG, including a guest via vhost-scsi.
Pass the number of received bytes down to the parser and validate the iSCSI
TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up
front: reject it if it is below the spc4r17 minimum or larger than the
received buffer, then bound the separator search, the ISID walk and the
name copy by that length. This is the length check the callers already
perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len
against tpdl, core_scsi3_emulate_register_and_move() validates it against
data_length), moved ahead of the scan. Also drop the unbounded "%s" of the
unterminated name.
Add per-format explicit name-length checks before copying into i_str,
rather than silently truncating with min_t: for FORMAT CODE 00b reject if
the descriptor body (tid_len - 4 bytes) cannot fit in
i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion
(from &buf[4] up to the separator) cannot fit. Both checks make the bounds
intent explicit at each format branch.
While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x"
separator sits at the very end of the descriptor: that leaves an empty ISID
and points the returned port nexus pointer at buf + tid_len, one past the
descriptor, which the registration code (__core_scsi3_locate_pr_reg(),
__core_scsi3_alloc_registration()) then dereferences as the ISID string --
the same over-read of the parameter buffer for a malformed descriptor. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Validate the packet length reported by the NIC
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate minimum PDU size for transform requests
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix OOB reads in remote DPCD/I2C sideband reply parsers
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
[added missing fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers
Three sideband reply parsers read 16-bit fields as:
val = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
and check bounds only after the fact. When idx == raw->curlen,
raw->msg[idx+1] reads one byte past the received message data into
the following struct fields (curchunk_len, curchunk_idx, curlen).
Affected functions:
- drm_dp_sideband_parse_enum_path_resources_ack()
full_payload_bw_number and avail_payload_bw_number fields
- drm_dp_sideband_parse_allocate_payload_ack()
allocated_pbn field
- drm_dp_sideband_parse_query_payload_ack()
allocated_pbn field
Fix by using a single combined check (idx + 2 > curlen) before each
2-byte read. Since the check is strictly tighter than idx > curlen,
no separate step is needed.
[added fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: bound EDID block reads to the response buffer
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl
set_ntacl_dacl() copies each ACE from the attacker-controlled stored
security descriptor verbatim into the response DACL without checking
sid.num_subauth. The ACE bytes (including an unchecked num_subauth)
originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is
stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE
with `break` rather than an error, so parse_sec_desc() still returns
success and the malformed SD reaches the xattr intact.
On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a
POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() ->
set_posix_acl_entries_dacl() walks the copied ACEs and reads
ntace->sid.sub_auth[ntace->sid.num_subauth - 1]
with num_subauth taken straight from the stored SD. Since sub_auth[]
is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g.
255) drives an out-of-bounds heap read of ~1 KB with an offset fully
controlled by an authenticated client.
The sibling functions already gate this field:
parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUTHORITIES
parse_sid() -- num_subauth > SID_MAX_SUB_AUTHORITIES
smb_copy_sid() -- min_t(u8, num_subauth, SID_MAX_SUB_AUTHORITIES)
set_ntacl_dacl() is the lone inconsistent path that omits the check.
Add the same num_subauth validation in set_ntacl_dacl() before copying
the ACE, matching the gate already enforced by parse_dacl(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
check_add_overflow() unconditionally writes the truncated sum into *d
even on overflow, per its contract in include/linux/overflow.h.
The four check_add_overflow() guards in set_posix_acl_entries_dacl()
and set_ntacl_dacl() break out of the ACE-building loops on overflow,
but the truncated *size is then consumed downstream at the end of
set_ntacl_dacl():
pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size);
This produces an on-wire NT ACL whose pndacl->size under-reports the
bytes actually written by the preceding fill_ace_for_sid()/memcpy()
calls, yielding a malformed ACL that can trigger out-of-bounds reads
when re-parsed by clients or ksmbd itself.
Restore *size to its pre-addition value on each overflow branch (via
`*size -= ace_sz` / `size -= nt_ace_size`) so that after the break,
*size once again holds the cumulative size of the successfully-written
ACEs. The committed ACL is then truncated-but-self-consistent rather
than malformed.
The ksmbd DACL builders are the only check_add_overflow() sites found
where an overflow path breaks out of a loop and the destination value
is consumed afterward. The other nearby break-style cases either
return -EINVAL on overflow (transport_ipc.c) or break without
consuming the overflowed destination value afterward (buildid.c). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - fix touch indexing for MMS134S and MMS136
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.
Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
plist->length = le32_to_cpu(id->rd_msg->desc[0].len);
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). |
| A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: bitblit: bound-check glyph index in bit_cursor()
bit_cursor() fetches the glyph under the cursor with
c = scr_readw(vc_pos);
src = vc_font.data + ((c & charmask) * w * height);
where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer
value comes directly from scr_readw() and may be larger than the current
font's glyph count.
Syzkaller triggers this via vcs_write(). The Call Trace shows
vcs_write() in vc_screen.c writing an arbitrary 16-bit value with
writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via
vcs_scr_writew() without checking charcount. The stored value is later
read in bit_cursor() in bitblit.c.
When the font is changed from a font with 512 glyphs to a font with
256 glyphs, the screen buffer can retain characters with the high
bit set from the previous mode, which could also produce the same
out-of-bounds access.
BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
Read of size 16 at addr ffff800086c57970
Call Trace:
soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365
fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427
hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883
update_region+0x100/0x18c drivers/tty/vt/vt.c:669
vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685
bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph
index to vc_font.charcount. Apply the same clamp in bit_cursor() after
extracting the attribute and masking, before indexing fontdata.
The fix completes the bounds checking started in commit 18c4ef4e765a
("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed
the cursor path.
This change should be safe because the clamp reuses the existing
contract from fbcon: charcount is maintained under console_lock in
con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when
switching from 512 to 256 glyphs. When stale screen data with high bits
remains after a font switch, or when vcs_write() stores an arbitrary
value, clamping the index to 0 prevents the out-of-bounds read without
changing cursor semantics — the same fallback bit_putcs uses. |
| In the Linux kernel, the following vulnerability has been resolved:
net/openvswitch: check Ethernet header length in key_extract()
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix buffer length in create_direct_keys()
We have seen in our CI the following KASAN message:
BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core]
Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764
[...]
[<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core]
[<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core]
[<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa]
[<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa]
[...]
The buggy address is located 4128 bytes inside of
allocated 4384-byte region [0000000176794000, 0000000176795120)
So in essence we read 16 bytes beyond 4384-byte allocation.
create_direct_keys calculates the pointer and length for in and out
buffers.
The size calculation for in includes the entire structure
size (out + in + mtt[]) but the pointer passed to cmd_exec points only
to the 'in' field, skipping the 'out' field.
This causes mlx5_copy_to_msg() to read beyond the allocated buffer
by sizeof(out) bytes when copying command data.
Properly calculate the input size to match the pointer and allocation size. |
