| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Prior to version 4.0.0, kata-runtime is vulnerable to host code execution via an unvalidated configuration path annotation. The runtime accepts an arbitrary io.katacontainers.config_path pod annotation and loads the referenced host TOML file without restriction. As a result, a pod user who can place a file at a host-visible path can supply a configuration that selects an attacker-controlled hypervisor or virtio-fs daemon binary, executing code as root on the host. This issue is fixed in version 4.0.0. |
| The FiboSearch WordPress plugin before 1.34.1 does not consistently exclude password-protected products from its unauthenticated AJAX endpoints, allowing unauthenticated users to disclose and enumerate password-protected products and their metadata without entering the product password. Two endpoints are affected: the autocomplete search endpoint (dgwt_wcas_ajax_search) and the Details Panel endpoint (dgwt_wcas_result_details) when queried for taxonomy details. |
| Git for Windows is the Windows port of Git. Prior to 2.55.0.windows.4, a malicious remote Git server can advertise a bundle URI that reaches transport_get_remote_bundle_uri(), fetch_bundle_uri_internal(), and copy_uri_to_file() in bundle-uri.c during clone or fetch when transfer.bundleuri=true. Non-HTTP(S) values are treated as local filesystem paths, and file URI prefixes are removed, so a bare UNC path or file URI targeting an attacker-controlled share causes Windows to initiate an outbound SMB connection. This can expose NTLM authentication material to the attacker-selected host. This issue is fixed in version 2.55.0.windows.4. |
| SiYuan before v3.8.0 interpolates secret placeholders into the destination URL parameter of the http_request MCP tool, allowing attackers to exfiltrate stored secrets. An MCP client can craft a request with an attacker-controlled URL containing secret placeholders to send plaintext secret values to any public host without confirmation. |
| CrossWatch (CW) is a synchronization engine. Prior to version 0.9.21, GET /api/app-auth/status is accessible without authentication and returns the other_sessions array, which exposes metadata of all active sessions — including originating IP addresses, User-Agent strings, internal session IDs, and creation/expiry timestamps. Any unauthenticated network attacker can enumerate this data without credentials. Version 0.9.21 fixes the issue. |
| Arc is an open, SQL-native time-series database for telemetry. Versions prior to 26.06.1 register Go's `net/http/pprof` handlers at `/debug/pprof/*` via `app.Use(pprof.New())` in `internal/api/server.go`, and `/debug/pprof` is added to `PublicPrefixes` in `cmd/arc/main.go`. The auth middleware short-circuits before the token check on prefix match, so the endpoints are reachable without any authentication. Version 26.06.1 contains a patch. Some workarounds are available. Block `/debug/pprof*` at a reverse proxy / load balancer in front of Arc, restrict Arc's API port to known-trusted networks via firewall rules, and/or patch the running build: comment out `app.Use(pprof.New())` in `internal/api/server.go` and rebuild. |
| Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc's user-SQL validator (`internal/api/query.go:ValidateSQLRequest`) blocked only `read_parquet(` and `arc_partition_agg(` via regex denylist. The broader DuckDB I/O function family — `read_csv_auto`, `read_csv`, `read_json`, `read_json_auto`, `read_text`, `read_blob`, `glob`, `parquet_metadata`, `parquet_schema`, `read_xlsx`, etc. — was not blocked. RBAC table-reference extraction inspected only `FROM`/`JOIN` clauses, so scalar table functions in the `SELECT` list slipped past both layers. This is fixed in 2026.06.1 via a structural sandbox at the DuckDB layer. After lockdown, DuckDB refuses to open any file outside the allowlist and refuses further `INSTALL`/`LOAD`. Already-loaded extensions remain callable. Some workarounds are available. Restrict API access to known-trusted networks via firewall rules or, as a temporary mitigation, add `read_csv*`/`read_json*`/`glob` etc. to `dangerousSQLPattern` in `internal/api/query.go`. |
| justhtml before 1.15.0 contains multiple security issues in URL sanitization helpers (clean_url_value/clean_url_in_js_string), HTML serialization, Markdown passthrough (html_passthrough=True), and several custom sanitization-policy edge cases. Depending on configuration, an attacker can bypass sanitization to inject active HTML and JavaScript — for example via encoded javascript: URLs, backslash-based relative URLs resolved as remote hosts, markup-breaking programmatic element/attribute names or HTML comments, raw </textarea> reintroduction through Markdown passthrough, or preserved <style>/<meta http-equiv=refresh>/<base href> tags in custom policies. Most custom-policy issues do not affect the default sanitize=True configuration; they primarily affect helper APIs, programmatic DOM construction, html_passthrough=True, and custom policies/transform pipelines. |
| justhtml before 1.16.0 contains multiple HTML sanitization bypass issues that can allow active/dangerous content (e.g., script or style) to survive sanitization, potentially leading to cross-site scripting. The issues primarily affect advanced usage rather than the default JustHTML(..., sanitize=True) path for ordinary parsed HTML: mutating or reusing sanitization policy objects (including exported defaults) could weaken later sanitization; programmatic DOM input to sanitize()/sanitize_dom() could miss mixed-case tag names (e.g., ScRiPt, StYlE); crafted programmatic doctype names could serialize into active markup; and custom policies preserving SVG or MathML could allow animation elements, presentation attributes with external url(...) references, or DOM trees mislabeled as namespace="html" to bypass foreign-content checks. Fixed in 1.16.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gact, act_police: range check the fallback control action
tcf_action_check_ctrlact() range checks the primary control action:
if (!opcode)
ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0;
TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it
cannot be set that way. But act_gact and act_police each carry a second,
independent control action supplied by user space that never reaches that
helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject
TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned
verbatim from the action.
In particular user space can store TC_ACT_CONSUMED, which is
TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value
range. That verdict tells every caller the action took ownership of the
skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for it. The result is
one leaked sk_buff plus its data buffer per packet traversing the filter,
unbounded, for all traffic on the chain including kernel-generated
packets.
Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so
with pval = 1 gact_determ() returns the fallback for every packet.
act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and
tcf_police_mtu_check() always passes.
TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor
reinsert action"), after both goto-chain guards were written:
commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on
fallback control action") and
commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on
fallback control action"). Neither guard was widened when the new
verdict appeared.
Factor the existing range test out of tcf_action_check_ctrlact() as
tcf_action_valid() and apply it to both fallbacks. The helper cannot call
tcf_action_check_ctrlact() directly because that also allocates a
goto_chain, which is exactly what these two sites must not do.
Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte
skbuff_head_cache object plus its 704-byte data buffer per packet. With
this patch both configurations are rejected with -EINVAL and kmemleak
reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix skb length accounting after XDP frag adjustment
veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().
Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs. |
| In the Linux kernel, the following vulnerability has been resolved:
VDUSE: avoid leaking information to userspace
The bounceing is not necessarily page aligned, so current VDUSE can
leak kernel information through mapping bounce pages to
userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking
information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get
The ipc_control_data buffer is allocated as kzalloc(max_size), where
max_size covers the entire struct sof_ipc_ctrl_data including its
flexible array payload. However, the bounds checks in bytes_ext_put
and _bytes_ext_get compared user data lengths against max_size
directly, ignoring that cdata->data sits at an offset of
sizeof(struct sof_ipc_ctrl_data) bytes into the allocation.
This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past
the end of the heap buffer from unprivileged userspace via the ALSA TLV
kcontrol interface, and similarly allowed over-reading adjacent heap
data on the get path.
Fix all bounds checks to subtract sizeof(*cdata) from max_size so they
reflect the actual space available at the cdata->data offset. Also fix
the error-path restore in bytes_ext_put which wrote to cdata->data
instead of cdata, causing the same overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix skb length accounting after generic XDP frag adjustment
Generic XDP exposes non-linear skb fragments through an xdp_buff. If an
XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Fix board ID over-read
The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.
Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan. |
| In the Linux kernel, the following vulnerability has been resolved:
net/openvswitch: check Ethernet header length in key_extract()
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject inline extents without valid headers
[BUG]
For a crafted btrfs image, the following KASAN can be triggered when
reading an inline lzo compressed file extent:
BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700
Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x70
print_report+0xd1/0x610
kasan_report+0xe0/0x110
__asan_report_load_n_noabort+0x13/0x20
lzo_decompress+0x57d/0x700
btrfs_decompress+0x140/0x1c0
uncompress_inline+0x147/0x1b0
btrfs_get_extent+0xb23/0x10a0
btrfs_do_readpage.constprop.0+0x538/0x1ac0
btrfs_readahead+0x32f/0x5f0
read_pages+0x16f/0x850
page_cache_ra_unbounded+0x296/0x490
do_page_cache_ra+0xd9/0x130
page_cache_sync_ra+0x3ee/0x6f0
filemap_get_pages+0x306/0x15c0
filemap_read+0x329/0xd00
btrfs_file_read_iter+0x1f8/0x2b0
vfs_read+0x4ef/0x720
ksys_read+0xf8/0x1d0
__x64_sys_read+0x71/0xb0
x64_sys_call+0x1ab0/0x1b70
do_syscall_64+0x61/0x470
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
[CAUSE]
For an inline lzo compressed file extent, there should always be one lzo
header, recording the total length of the compressed data, followed by
one segment header, recording the compressed lzo payload.
But if a crafted inline lzo compressed file extent contains only an lzo
header, without the segment header or payload, lzo_decompress() will
still try to read the segment header, causing a read beyond the item
boundary.
Furthermore if the inline lzo compressed file extent is the first item
of the leaf, it will be at the extent buffer boundary. The above
out-of-boundary read will go beyond the extent buffer boundary,
triggering the above KASAN report.
[FIX]
Validate the total length of the inlined lzo compressed file extent, to
make sure there is at least one LZO header and one segment header, and a
non-zero payload.
[ Rework the commit message to remove slop ] |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix type confusion in notification logic
Sashiko reports:
At the start of the loop in pmbus_notify(), the code unconditionally casts
every attribute to a struct sensor_device_attribute:
drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() {
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
...
}
However, data->group.attrs can contain other types like struct
pmbus_samples_reg or struct pmbus_sensor, which only embed a base
struct device_attribute.
If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting
it to struct sensor_device_attribute and reading the index field appears
to access memory past the end of the allocation, which might trigger a
slab-out-of-bounds read.
Additionally, if da is a struct pmbus_sensor, casting it causes the index
field to overlap with the page, phase, and reg fields. Could this produce
a garbage mask on little-endian systems that spuriously matches the target
reg, page, and flags during an alert?
Fix the problem by using struct sensor_device_attr in struct pmbus_sensor
and struct pmbus_label. Since those attributes never trigger a
notification, set the value of attr->index to -1 for them. Use this value
to distinguish from boolean attributes which _can_ trigger a notification
and use the index field to encode mask, page, and register values. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - sanitize event type index when fetching event masks
The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK
ioctls is used to index the static counts array in evdev_get_mask_cnt()
and client evmasks array in evdev_get_mask().
While the event type is architecturally bounded by EV_CNT, speculative
execution may mispredict bounds checks and perform out-of-bounds loads.
Sanitize the event type index in evdev_get_mask_cnt() branchlessly using
array_index_mask_nospec(). This clamps the index to 0 for safe array
access and forces the returned count to 0 speculatively when the index
is out of bounds.
We do not need additional array_index_nospec() calls in evdev_get_mask()
because evdev_get_mask_cnt() speculatively forces the count (and
resulting xfer_size) to 0 for out-of-bounds types, preventing any
speculative memory access to client evmasks array. |
