| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Ceph RGW's STS (Security Token Service) session token implementation. The STS tokens use the same unauthenticated AES-128-CBC encryption as CephX, which lacks message authentication and uses a hardcoded initialization vector. Because there is no integrity protection on the tokens, an attacker who holds any valid unprivileged STS token can perform a CBC bit-flip attack to modify the token contents and escalate to full RGW admin privileges. This requires only that STS is enabled (rgw_s3_auth_use_sts = true) and that the attacker has a single valid STS token. Successful exploitation grants complete control over the RGW service, including reading, writing, and deleting all objects and buckets. |
| openssl_encrypt versions before 1.4.0 use a non-standard PBKDF2 key derivation construction with iterations=1 per call in an outer loop, creating a KDF whose security properties have not been formally analyzed. Attackers can exploit this weakened key derivation to more efficiently crack passwords protecting legacy encrypted files compared to standard PBKDF2 implementations. |
| openssl_encrypt versions before 1.4.0 use HKDF with no salt and static info parameter in key normalization functions, reducing entropy extraction and determinism. Attackers can exploit predictable key derivation with identical inputs to weaken cryptographic security against multi-target attacks. |
| ePA 3.x Integration implements the authorization workflow and writes Medical Information Objects to Germany's electronic patient record. Prior to 1.3.0, ePA 3.x Integration leaves request_counter unchanged in app/vau/VAUProtokoll.py while constructing VAU messages. The frozen client request counter causes the server side to reuse AES-GCM nonce and key combinations across responses. A network attacker who collects repeated ciphertexts can recover the XOR of plaintexts and use predictable inner HTTP headers and JSON fields to recover sensitive data, including patient health records. Repeated nonces can also enable recovery of the GHASH authentication key through the Joux forbidden attack, allowing forged AES-GCM messages and injection of malicious responses. The response-counter check also fails to maintain last_response_counter, weakening replay and ordering validation. This issue is fixed in version 1.3.0. |
| A security flaw has been discovered in lin-snow Ech0 up to 5.4.1. Affected by this issue is the function MD5Encrypt of the file internal/util/crypto/crypto.go. Performing a manipulation results in risky cryptographic algorithm. Remote exploitation of the attack is possible. The complexity of an attack is rather high. The exploitation is known to be difficult. Upgrading to version 5.4.2 can resolve this issue. The patch is named 9ce19a3b0d0765086a655f45d3a706ec1810404f. It is recommended to upgrade the affected component. |
| Inadequate encryption strength in Windows Active Directory allows an authorized attacker to bypass a security feature over a network. |
| is affected by a Use of Hard-coded Cryptographic Key vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized read and write access. Exploitation of this issue does not require user interaction. Scope is changed. |
| A vulnerability in the MIT Kerberos implementation allows GSSAPI-protected messages using RC4-HMAC-MD5 to be spoofed due to weaknesses in the MD5 checksum design. If RC4 is preferred over stronger encryption types, an attacker could exploit MD5 collisions to forge message integrity codes. This may lead to unauthorized message tampering. |
| Wss4jSecurityInterceptor defaulted allowRSA15KeyTransportAlgorithm to true, overriding Apache WSS4J's safer default for validation RequestData. Inbound WS-Security decryption could therefore accept RSA PKCS#1 v1.5 (rsa-1_5) encrypted key material unless operators explicitly reconfigured the flag.
Affected versions:
Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8. |
| A Weak Password Requirements issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. The affected products use a numeric password with a small maximum character size for the password. |
| authfile.c in sshd in OpenSSH before 7.4 does not properly consider the effects of realloc on buffer contents, which might allow local users to obtain sensitive private-key information by leveraging access to a privilege-separated child process. |
| The TLS protocol 1.2 and earlier, when a DHE_EXPORT ciphersuite is enabled on a server but not on a client, does not properly convey a DHE_EXPORT choice, which allows man-in-the-middle attackers to conduct cipher-downgrade attacks by rewriting a ClientHello with DHE replaced by DHE_EXPORT and then rewriting a ServerHello with DHE_EXPORT replaced by DHE, aka the "Logjam" issue. |
| The RC4 algorithm, as used in the TLS protocol and SSL protocol, has many single-byte biases, which makes it easier for remote attackers to conduct plaintext-recovery attacks via statistical analysis of ciphertext in a large number of sessions that use the same plaintext. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| Use of a Broken or Risky Cryptographic Algorithm vulnerability in Salesforce Marketing Cloud Engagement (CloudPages, Forward to a Friend, Profile Center, Subscription Center, Unsub Center, View As Webpage modules) allows Web Services Protocol Manipulation. This issue affects Marketing Cloud Engagement: before January 21st, 2026. |
| Hard-coded Cryptographic Key vulnerability in Salesforce Marketing Cloud Engagement (CloudPages, Forward to a Friend, Profile Center, Subscription Center, Unsub Center, View As Webpage modules) allows Web Services Protocol Manipulation. This issue affects Marketing Cloud Engagement: before January 21st, 2026. |
| The use of a weak cryptographic key pair in the signature verification process in WPS Office (Kingsoft) on Windows allows an attacker who successfully recovered the private key to sign components.
As older versions of WPS Office did not validate the update server's certificate, an Adversary-In-The-Middle attack was possible allowing updates to be hijacked. |
| Arris VIP1113 devices through 2025-05-30 with KreaTV SDK have a firmware decryption key of cd1c2d78f2cba1f73ca7e697b4a485f49a8a7d0c8b0fdc9f51ced50f2530668a. |
| The certificate and private key used for providing transport layer security for connections to the web interface (TCP port 443) is hard-coded in the firmware and are shipped with the update files. An attacker can use the private key to perform man-in-the-middle attacks against users of the admin interface. The files are located in /etc/ssl (e.g. salia.local.crt, salia.local.key and salia.local.pem). There is no option to upload/configure custom TLS certificates. |
