| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: s3fb: fix potential memory leak in s3_pci_probe()
In s3_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist() |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the volume AFS_VOLUME_RM_TREE is set on
Fix afs_insert_volume_into_cell() to set AFS_VOLUME_RM_TREE on the volume
replaced, not the new volume, as it's now removed from the cell's volume
tree. This will cause the old volume to be removed from the tree twice and
the new volume never to be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
Free the UAR index returned by the hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields on map value recycle
Map update and delete paths currently call bpf_obj_free_fields() when a
value is being replaced or recycled. That makes field destruction depend
on the context of the update/delete operation. For tracing programs this
can include NMI context, where referenced kptr destructors, uptr
unpinning, and graph root destruction are not generally safe.
Introduce bpf_obj_cancel_fields() for the reusable-value path. It only
performs NMI-safe cleanup for timer, workqueue, and task_work fields.
Fields that need full destruction are left attached to the recycled value
and are destroyed by the final cleanup path instead.
Switch array and hashtab update/delete/recycle paths to this cancel
helper. Keep bpf_obj_free_fields() for final map destruction and for
bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator
destructors, so teardown continues to walk the normal and extra elements
and fully destroy their fields.
This deliberately relaxes the eager-free semantics of map update/delete
for special fields. Programs that relied on a recycled map slot becoming
empty immediately after update/delete were relying on behavior that
cannot be implemented safely from every BPF execution context without
offloading arbitrary destructors.
There is a chance this change breaks programs making assumptions
regarding the eager freeing of fields. If so, we can relax semantics to
cancellation only when irqs_disabled() is true in the future. However,
theoretically, map values that get reused eagerly already have weaker
guarantees as parallel users can recreate freed fields before the new
element becomes visible again. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Destroy the pages content after detaching from dmabuf
Sashiko points out this has gotten out of order, the mutex could still be
in use through the dmabuf invalidation callbacks. Don't destroy any of the
pages content until the dmabuf is fully detached. |
| In the Linux kernel, the following vulnerability has been resolved:
um: vector: fix use-after-free in vector_mmsg_rx()
When vector_mmsg_rx() discards a packet whose overlay header fails
verify_header(), it frees the skb and continues the loop:
if (header_check < 0) {
dev_kfree_skb_irq(skb);
vp->estats.rx_encaps_errors++;
continue;
}
The normal and short-packet paths fall through to the bottom of the
loop body, which clears the consumed slot and advances the cursors:
(*skbuff_vector) = NULL;
mmsg_vector++;
skbuff_vector++;
The verify_header() < 0 path skips that via continue, so the freed skb
is left in skbuff_vector[] and the cursors do not advance. The next
iteration reads the same slot, gets the freed skb, and frees it again,
producing a refcount underflow / use-after-free in the RX path.
Discard the slot the same way the other paths do before continuing.
Only transports whose verify_header() can return negative are affected:
GRE and L2TPv3 do so on a cookie/session-id mismatch (raw/tap do not),
so any peer on such a transport can trigger it without authentication. |
| Privilege escalation due to invalid pointer in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix double free in rvu_rep_rsrc_init()
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: refill RX buffers before XDP or skb use
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix double-free in tipc_buf_append()
tipc_msg_validate() can potentially reallocate the skb it is validating,
freeing the old one. In tipc_buf_append(), it was being called with a
pointer to a local variable which was a copy of the caller's skb
pointer.
If the skb was reallocated and validation subsequently failed, the error
handling path would free the original skb pointer, which had already
been freed, leading to double-free.
Fix this by checking if head now points to a newly allocated reassembled
skb. If it does, reassign *headbuf for later freeing operations. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: renesas: Fix memory leak in renesas_i3c_i3c_xfers()
The xfer structure allocated by renesas_i3c_alloc_xfer() was never freed
in the renesas_i3c_i3c_xfers() function. Use the __free(kfree) cleanup
attribute to automatically free the memory when the variable goes out of
scope. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: free page on short-frame rejection in tun_xdp_one()
tun_xdp_one() returns -EINVAL on a frame shorter than ETH_HLEN without
freeing the page that vhost_net_build_xdp() allocated for it.
tun_sendmsg() discards that -EINVAL and still returns total_len, so
vhost_tx_batch() takes the success path and never frees the page; each
short frame in a batch leaks one page-frag chunk.
A local process that can open /dev/net/tun and /dev/vhost-net can hit
this path: it attaches a tun/tap device as the vhost-net backend and
feeds TX descriptors whose length minus the virtio-net header is below
ETH_HLEN. Each kick leaks the page-frag chunks for that batch, and a
tight submission loop exhausts host memory and triggers an OOM panic.
Free the page before returning -EINVAL, matching the XDP-program error
path in the same function. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: s3c64xx: fix NULL-deref on driver unbind
A change moving DMA channel allocation from probe() back to
s3c64xx_spi_prepare_transfer() failed to remove the corresponding
deallocation from remove().
Drop the bogus DMA channel release from remove() to avoid triggering a
NULL-pointer dereference on driver unbind.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-aes - Fix 3-page memory leak in atmel_aes_buff_cleanup
atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with
ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the
first page using free_page(), leaking the remaining 3 pages. Use
free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rds: fix MR cleanup on copy error
__rds_rdma_map() hands sg/pages ownership to the transport after
get_mr() succeeds. If copying the generated cookie back to user space
fails after that point, the error path must not free those resources
again before dropping the MR reference.
Remove the duplicate unpin/free from the put_user() failure branch so
that MR teardown is handled only through the existing final cleanup
path. |
| In the Linux kernel, the following vulnerability has been resolved:
media: renesas: vsp1: Fix NULL pointer deref on module unload
When unloading the module on gen 4, we hit a NULL pointer dereference.
This is caused by the cleanup code calling vsp1_drm_cleanup() where it
should be calling vsp1_vspx_cleanup().
Fix this by checking the IP version and calling the drm or vspx function
accordingly, the same way as the init code does. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double free in create_space_info() error path
When kobject_init_and_add() fails, the call chain is:
create_space_info()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&space_info->kobj)
-> space_info_release()
-> kfree(space_info)
Then control returns to create_space_info():
btrfs_sysfs_add_space_info_type() returns error
-> goto out_free
-> kfree(space_info)
This causes a double free.
Keep the direct kfree(space_info) for the earlier failure path, but
after btrfs_sysfs_add_space_info_type() has called kobject_put(), let
the kobject release callback handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: Use cached t->net in ip6erspan_changelink().
After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of
rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns
ip6gre hash via link_net. ip6erspan_changelink() was not converted in
that series and still uses dev_net(dev), which diverges from the
device's creation netns after IFLA_NET_NS_FD migration.
This re-inserts the tunnel into the wrong per-netns hash. The
original netns keeps a stale entry. When that netns is later
destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a
slab-use-after-free reported by KASAN, followed by a kernel BUG at
net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify().
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net).
ip6gre_changelink() earlier in the same file already uses the cached
t->net; only ip6erspan_changelink() has the wrong shape. |
