| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject repeated SMB2 NEGOTIATE requests
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: restore write access when removing an entry
Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.
Commit 90f601b497d7 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.
Restore write access in put_binfmt_handler() before closing the
interpreter file. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: Fix leak when custom dump_segments addition fails
Free allocated minidump_region 'name' in qcom_add_minidump_segments()
when failing before adding the region to 'dump_segments'. Otherwise,
the 'name' is not tracked and is never freed by qcom_minidump_cleanup().
Return error when adding to 'dump_segments' fails. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
The memory allocated for mboxq using mempool_alloc() is not freed in
some of the early exit error paths. Fix that by moving the
mempool_free() call to an earlier point after last use. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix firmware leak in async update
The firmware object was not being released if validation failed.
Use __free(firmware) to ensure the firmware is always released. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ixp4xx_hss: fix duplicate HDLC netdev allocation
ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored
in ndev, initialized, and registered with register_hdlc_device(). The
second one is stored in port->netdev and later used by the remove path
for unregister_hdlc_device() and free_netdev().
This means that the registered netdev is not the same object that is
unregistered and freed on remove. It also leaks the first allocation if
the second alloc_hdlcdev() call fails, and the first allocation is not
checked before ndev is used.
Older code allocated the HDLC netdev only once and stored the same object
in both the local variable and port->netdev. The buggy conversion split
this into two alloc_hdlcdev() calls. A later rename changed the local
variable name to ndev, but the underlying mismatch remained.
Fix this by allocating the HDLC netdev only once and assigning the same
object to port->netdev. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix SQB pointer leak on init failure
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
OcteonTX2 PF device and the corresponding AF mailbox setup to test with,
no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: drop in-flight Tx SKBs on close
The MACB driver has since forever leaked the outgoing SKBs that
have not yet been marked as completed. They live in queue->tx_skb
which gets freed without remorse nor checking.
macb_free_consistent() gets called in a few codepaths, but only close will
trigger the added expressions. In macb_open() and macb_alloc_consistent()
failure cases, queues' tx_skb just got allocated and are empty. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow
Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16
DACL size overflow") added check_add_overflow() guards that break out
of the ACE-building loops in set_posix_acl_entries_dacl() when the
accumulated DACL size would wrap past 65535.
However, each iteration allocates a struct smb_sid via kmalloc_obj()
at the top of the loop and relies on the kfree(sid) call at the end
of the loop body (the 'pass_same_sid' label in the first loop, and
the explicit kfree at the tail of the second loop) to release it.
The newly introduced 'break' statements bypass those kfree() calls,
leaking the sid buffer every time an overflow is detected.
A malicious or malformed file with enough POSIX ACL entries to trip
the overflow check will leak one or more struct smb_sid allocations
on every request that touches the file's DACL, providing a trivial
kernel memory exhaustion vector.
Free sid before breaking out of the loops to plug the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm()
If cxacru_cm() encounters an error while submitting or waiting for snd_urb,
it aborts and returns the error without killing the already submitted
rcv_urb. This leaves the rcv_urb active.
When this happens during initialization (e.g., in cxacru_atm_start()), the
driver may ignore the error and proceed to call cxacru_poll_status(), which
invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb
triggers a warning in usb_submit_urb():
cxacru 1-1:1.0: send of cm 0x84 failed (-104)
ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104
------------[ cut here ]------------
URB ffff88812658d200 submitted while active
WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0
drivers/usb/core/urb.c:379
...
Call Trace:
<TASK>
cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631
cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline]
cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828
cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814
usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927
usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178
cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370
...
To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts
early. We can safely call usb_kill_urb() on rcv_urb in the error path, as
it is safe to call even if the URB is not active (e.g., if it failed to
submit in the first place, or if it already completed). |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-laptop: fix missing cleanups in init error path
dell_init() initializes several resources after dell_setup_rfkill(),
including the optional touchpad LED, keyboard backlight LED, battery
hook, debugfs directory and dell-laptop notifier.
If a later LED or backlight registration fails, the error path only
tears down the battery hook and rfkill resources. This leaves the
notifier, debugfs directory, keyboard backlight LED and optional
touchpad LED registered after dell_init() returns an error.
Add the missing cleanup calls before tearing down rfkill. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/tpmi: use cleanup helpers in mem_write()
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Free arenas on btt_init() error paths
The arenas allocated by discover_arenas() or create_arenas() are not
freed on some error paths in btt_init(). This leaks memory when BTT
initialization fails.
Call free_arenas() from the affected error paths to release the
allocations.
[ as: commit message and log edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: sm501: Fix reference leak on failed device registration
When platform_device_register() fails in sm501_register_device(), the
embedded struct device in pdev has already been initialized by
device_initialize(), but the failure path only reports the error and
returns without dropping the device reference for the current platform
device:
sm501_register_device()
-> platform_device_register(pdev)
-> device_initialize(&pdev->dev)
-> setup_pdev_dma_masks(pdev)
-> platform_device_add(pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before returning the error.
The issue was identified by a static analysis tool I developed and
confirmed by manual review. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: free volume-wide resources on fill_super failure
ntfs_fill_super()'s err_out_now path frees only the volume struct via
kfree(vol), leaving several vol-owned allocations behind on every mount
failure:
- vol->nls_map, loaded by ntfs_init_fs_context() via
load_nls_default() (or replaced by an explicit nls= option in
ntfs_parse_param()), is never unload_nls()'d.
- vol->volume_label, allocated by load_system_files() through
ntfs_ucstonls() once the $Volume name attribute has been parsed, is
not released by load_system_files()'s own error labels nor by the
fill_super() inline cleanup that only runs on d_make_root()
failure. Any later failure inside load_system_files() leaks it.
- vol->lcn_empty_bits_per_page was kvfree()'d in
unl_upcase_iput_tmp_ino_err_out_now without clearing the pointer,
so it could not be folded into a single common cleanup.
Because the failure paths never call ntfs_volume_free() and never reach
the d_make_root() inline cleanup block (it sits above the label and is
jumped over by the load_system_files() / kvmalloc failure gotos), these
resources accumulate per failed mount attempt with no chance of
recovery short of unloading the module. This is a silent leak: the
inodes loaded prior to failure remain hashed but generic_shutdown_super()
skips evict_inodes() when sb->s_root is unset, so no CHECK_DATA_CORRUPTION
warning is emitted either.
Move the per-volume frees down to err_out_now and drop the
lcn_empty_bits_per_page kvfree() from the upper label so the cleanup is
performed exactly once on every failure path. Using unconditional
kvfree() / kfree() / unload_nls() is safe because they all accept NULL
and the upper labels that previously freed nls_map (the d_make_root()
inline cleanup) already clear the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Plug nlm_file leak when nlm_do_fopen() fails
A client can repeatedly drive nlm_do_fopen() failures by presenting
file handles that the underlying export rejects. After kzalloc_obj()
succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not
yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps
to out_unlock, which releases nlm_file_mutex and returns without
freeing the allocation, so each failure leaks one nlm_file.
Route the failure through out_free so kfree() runs before the
function returns. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Free arena sub-allocations on discover_arenas() error path
Memory allocated by btt_freelist_init(), btt_rtt_init(), and
btt_maplocks_init() is not freed on some discover_arenas() error
paths. This leaks memory when arena discovery fails.
Add the missing kfree() calls to release the allocations before
returning an error.
[ as: commit message and log edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: clean untagged VLAN on netdev registration failure
When an mesh interface is registered, it creates an untagged struct
batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in
this process, another receiver of this notification can veto the
registration. The netdev registration will be aborted because of this veto.
The register_netdevice() call will try to clean up the net_device using
unregister_netdevice_queue() - which only uses the .priv_destructor to
free private resources. In this situation, .dellink will not be called.
The cleanup of the untagged batadv_meshif_vlan must thefore be done in the
destructor to avoid a leak of this object. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: nvidia: fix potential memory leak in nvidiafb_probe()
In nvidiafb_probe(), the memory allocated for modelist in
nvidia_set_fbinfo() is not freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
